prEN 14638-3
(Main)Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel made to a design justified by finite element and/or experimental methods
Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel made to a design justified by finite element and/or experimental methods
Premične plinske jeklenke - Ponovno polnljivi varjeni vsebniki s prostornino, ne večjo kot 150 litrov - 3. del: Varjene jeklenke iz ogljičnega jekla, izdelane po konstrukciji, potrjeni s preskušanjem
General Information
Standards Content (Sample)
SLOVENSKI oSIST prEN 14638-3:2006
PREDSTANDARD
marec 2006
Premične plinske jeklenke – Ponovno polnljivi varjeni vsebniki s prostornino,
ne večjo kot 150 litrov – 3. del: Varjene jeklenke iz ogljičnega jekla, izdelane
po metodi, ki je eksperimentalno potrjena
Transportable gas cylinders – Refillable welded receptacles of a capacity not
exceeding 150 li
...
This May Also Interest You
This document provides requirements, guidance and information for the design and fabrication of topsides structure for offshore structures, including in-service, pre-service and post-service conditions.
The actions on topsides structure and the action effects in structural components are derived from this document, where necessary in combination with other International Standards in the ISO 19901 series (e.g. ISO 19901-1 for wind actions - see 7.6.2, ISO 19901-2 for seismic actions - see 7.7) and ISO 19902 for fatigue design (see 6.7).
This document is applicable to the following:
— topsides of fixed offshore structures;
— discrete structural units placed on the hull structures of floating offshore structures and mobile offshore units;
— topsides of arctic offshore structures, excluding winterization (see ISO 19906).
If any part of the topsides structure forms part of the primary structure of the overall structural system which resists global platform actions, the requirements of this document are supplemented with applicable requirements in ISO 19902, ISO 19903, ISO 19904-1, ISO 19905-1, ISO 19905-3 and ISO 19906.
For those parts of floating offshore structures and mobile offshore units that are chosen to be governed by the rules of a recognized classification society, the corresponding class rules supersede the associated requirements of this document.
This document also addresses prevention, control and assessment of fire, explosions and other accidental events.
The fire and explosion provisions of this document can be applied to those parts of the hulls of floating structures and mobile offshore units that contain hydrocarbon processing, piping or storage.
NOTE Requirements for structural integrity management are presented in ISO 19901-9.
This document applies to structural components including the following:
— primary and secondary structure in decks, module support frames and modules;
— flare structures;
— crane pedestal and other crane support arrangements;
— helicopter landing decks (helidecks);
— permanent bridges between separate offshore structures;
— masts, towers and booms on offshore structures.
This document provides requirements for selecting and using a national building standard with a correspondence factor for determining the resistance of rolled and welded non-circular prismatic components and their connections.
- Draft155 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies a fluorimetric method for the determination of alkaline phosphatase (ALP) (EC 3.1.3.1) activity in cheese.
This method is applicable to soft cheeses, semi-hard and hard cheeses provided that the mould is only on the surface of the cheese and not also in the inner part (e.g. blue veined cheeses). For large hard cheeses, specific conditions of sampling apply (see Clause 7).
The instrument used for the determination of ALP can read activities in the supernatant up to 7 000 milliunits per litre (mU/kg).
- Draft21 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Jan-2024
- 67.100.30
- CEN/TC 302
This document gives the necessary information to explain the requirements referenced in ISO 15607 about the qualification of welding procedures based on previous welding experience.
In addition, it gives the range of qualification.
The use of this document can be restricted by an application standard or a specification.
- Draft9 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Jan-2024
- 25.160.01
- 2014/68/EU
- 97/23/EC
- M/071
- CEN/TC 121
This document specifies a method for the determination of the following elements in aqua regia, nitric acid or mixture of hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4)/hydrofluoric (HF) acid digests of soil, treated biowaste, waste, sludge and sediment:
Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gallium (Ga), gadolinium (Gd), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu) magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rhodium (Rh), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), tantalum (Ta), tellurium (Te), terbium (Tb), thallium (Tl), thulium (Tm), thorium (Th), tin (Sn), titanium (Ti), tungsten (W), vanadium (V), yttrium (Y), ytterbium (Yb), zinc (Zn) and zirconium (Zr).
The method is also applicable to other extracts or digests originating from, for example, DTPA extraction, fusion methods or total digestion methods, provided the user has verified the applicability.
The method has been validated for the elements given in Table A.1 (sludge), Table A.2 (compost) and Table A.3 (soil). The method is applicable for other solid matrices and other elements as listed above, provided the user has verified the applicability.
This method is also applicable for the determination of major, minor and trace elements in aqua regia and nitric acid digests and in eluates of construction products (EN 17200[22]).
NOTE Construction products include e.g. mineral-based products; bituminous products; metals; wood-based products; plastics and rubbers; sealants and adhesives; paints and coatings.
- Draft34 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Jan-2024
- 13.080.10
- CEN/TC 444
This document reviews methods for measuring the thickness of metallic and other inorganic coatings on both metallic and non-metallic substrates (see Tables 1, A.1 and A.2). It is limited to tests already specified, or to be specified, in International Standards and excludes certain tests that are used for special applications.
- Draft16 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Jan-2024
- 17.040.20
- 25.220.20
- 25.220.40
- CEN/TC 262
This document:
— defines a reference Land Administration Domain Model (LADM) covering basic information-related components of land administration/georegulation;
— provides an abstract, conceptual model with packages related to:
— parties (people and organizations),
— basic administrative units, rights, responsibilities and restrictions (RRRs),
— spatial units,
— a generic conceptual model (sources and versioned object);
— provides terminology for land administration/georegulation, based on various national and international systems, that is as simple as possible in order to be useful in practice. The terminology allows a shared description of different formal or informal practices and procedures in various jurisdictions;
— provides a content model independent of encoding, allowing for the support of various encodings;
— provides a basis for national and regional profiles;
— enables the combining of land administration/georegulation information from different sources in a coherent manner.
The following are outside the scope of this document:
— interference with (national) land administration/georegulation laws with potentially legal implications due to the possibility of describing different types of systems but in the same notation;
— construction of external databases with party data, address data, land cover data, physical utility network data, archive data and taxation data. However, the LADM provides stereotype classes for these data sets to indicate which data set elements the LADM expects from these external sources, if available.
This document provides the concepts and basic structure for standardization in the land administration/georegulation domain. It defines a general schema that permits regulatory information to be described. It also allows for the relationship to multiple parties and groups to be expressed together with a referencing structure so that sourcing of all information systems can be maintained. This document establishes the common elements and basic schema upon which more detailed schema can be established.
- Draft38 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Jan-2024
- 35.240.70
- CEN/TC 287
This document specifies a fluorimetric method for the determination of alkaline phosphatase (ALP) (EC 3.1.3.1) activity in raw and heat-treated whole milk, semi-skimmed milk, skimmed milk and flavoured milks.
This method is applicable to milk and milk-based drinks from cows, sheep and goats. It is also applicable to milk powder after reconstitution.
The instrument used for the determination of ALP can read activities up to 7 000 milliunits per litre (mU/l). If the activity is higher than 7 000 mU/l, it is diluted with ALP-free milk so as to obtain a measurement not higher than 7 000 mU/l.
- Draft19 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Jan-2024
- 67.100.10
- CEN/TC 302
This document specifies a method of testing for deleterious effects that can arise from flux residues after soldering or tinning test coupons. The test is applicable to type 1 and type 2 fluxes, as specified in ISO 9454-1, in solid or liquid form, or in the form of flux-cored solder wire, solder preforms or solder paste constituted with eutectic or near-eutectic tin/lead (Sn/Pb) or Sn95,5Ag3Cu0,5 or other lead-free solders as agreed between user and supplier (see ISO 9453).
This test method is also applicable to fluxes for use with lead-containing and lead-free solders. However, the soldering temperatures can be adjusted with agreement between tester and customer.
- Draft24 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Jan-2024
- 25.160.50
- CEN/TC 121
This document specifies a method for the determination of the thermal diffusivity of a thin solid disc of plastics in the thickness direction by the light flash method. This method is based upon the measurement of the temperature rise at the rear face of the thin-disc specimen produced by a short energy pulse on the front face.
The method is applicable to homogeneous solid plastics as well as composites having an isotropic or orthotropic structure. In general, it covers materials having a thermal diffusivity, α, in the range 1 × 10−7 m2⋅s−1 < α < 1 × 10−4 m2⋅s−1. Measurements can be carried out in gaseous and vacuum environments over a temperature range from −100 °C to +400 °C.
NOTE For inhomogeneous specimens, the measured values can be specimen thickness dependent.
- Draft20 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Jan-2024
- 83.080.01
- CEN/TC 249
This document specifies statistical methodology for assessing the expected agreement between two test methods that purport to measure the same property of a material, and for deciding if a simple linear bias correction can further improve the expected agreement.
This document is applicable for analytical methods which measure quantitative properties of petroleum or petroleum products resulting from a multi-sample-multi-lab study (MSMLS). These types of studies include but are not limited to interlaboratory studies (ILS) meeting the requirements of ISO 4259-1 or equivalent, and proficiency testing programmes (PTP) meeting the requirements of ISO 4259-3 or equivalent.
The methodology specified in this document establishes the limiting value for the difference between two results where each result is obtained by a different operator using different apparatus and two methods X and Y, respectively, on identical material. One of the methods (X or Y) has been appropriately bias-corrected to agree with the other in accordance with this practice. This limit is designated as the between-methods reproducibility. This value is expected to be exceeded with a probability of 5 % under the correct and normal operation of both test methods due to random variation.
NOTE Further conditions for application of this methodology are given in 5.1 and 5.2.
- Draft57 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.