EN ISO 15118-8:2019
(Main)Road vehicles - Vehicle to grid communication interface - Part 8: Physical layer and data link layer requirements for wireless communication (ISO 15118-8:2018)
Road vehicles - Vehicle to grid communication interface - Part 8: Physical layer and data link layer requirements for wireless communication (ISO 15118-8:2018)
ISO 15118-8:2018 specifies the requirements of the physical and data link layer of a wireless High Level Communication (HLC) between Electric Vehicles (EV) and the Electric Vehicle Supply Equipment (EVSE). The wireless communication technology is used as an alternative to the wired communication technology as defined in ISO 15118‑3.
It covers the overall information exchange between all actors involved in the electrical energy exchange. ISO 15118 (all parts) are applicable for conductive charging as well as Wireless Power Transfer (WPT).
For conductive charging, only EVSEs compliant with "IEC 61851‑1 modes 3 and 4" and supporting HLC are covered by this document. For WPT, charging sites according to IEC 61980 (all parts) and vehicles according to ISO/PAS 19363 are covered by this document.
Straßenfahrzeuge - Kommunikationsschnittstelle zwischen Fahrzeug und Ladestation - Teil 8: Anforderungen an physikalische und Datenverarbeitungsschnittstelle für die drahtlose Kommunikation
Véhicules routiers - Interface de communication entre véhicule et réseau électrique - Partie 8: Exigences relatives à la couche physique et à la couche de liaison entre les données pour la communication sans fil (ISO 15118-8:2018)
Le présent document définit les exigences de la couche physique et de la couche de liaison de données d'une communication sans fil de haute niveau (HLC) entre les véhicules électriques (VE) et les équipements d'alimentation des véhicules électriques (EVSE). La technologie de communication sans fil est utilisée comme alternative à la technologie de communication filaire telle que définie dans l'ISO 15118-3.
Il couvre l'échange global d'information entre tous les acteurs impliqués dans l'échange d'énergie électrique. L'ISO 15118 (toutes les parties) s'applique à la charge par conduction ainsi qu'au transfert d'énergie sans fil (WPT).
Concernant la charge conductive, seuls les EVSE conformes à «l'IEC 61851-1 modes 3 et 4» et supportant la HLC sont couverts par le présent document. Concernant le WPT, les sites de charge conformes à l'IEC 61980 (toutes les parties) et les véhicules conformes à l'ISO/PAS 19363 sont traités dans le présent document.
Cestna vozila - Komunikacijski vmesnik med vozilom in omrežjem - 8. del: Zahteve za fizične in podatkovne povezovalne plasti za brezžično komunikacijo (ISO 15118-8:2018)
Standard ISO 15118-8:2018 določa zahteve za fizični in podatkovno povezovalni sloj brezžične komunikacije na visoki ravni (HLC) med električnimi vozili (EV) in opremo za napajanje električnih vozil (EVSE). Brezžična komunikacijska tehnologija se uporablja kot alternativa žični komunikacijski tehnologiji, kot je opredeljeno v standardu ISO 15118‑3.
Zajema celotno izmenjavo informacij med vsemi stranmi, ki so udeležene pri električnem polnjenju. Standard ISO 15118 (vsi deli) se uporablja za konduktivno polnjenje in tudi za brezžični prenos energije (WPT).
Kar zadeva konduktivno polnjenje, je v tem dokumentu zajeta samo oprema za napajanje električnih vozil, skladna s standardom »IEC 61851‑1, načinoma 3 in 4«, ter podporna komunikacija na visoki ravni. Kar zadeva brezžični prenos, so v tem dokumentu zajeta polnilna mesta v skladu s standardom IEC 61980 (vsi deli) in vozila v skladu s standardom ISO/PAS 19363.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2019
&HVWQDYR]LOD.RPXQLNDFLMVNLYPHVQLNPHGYR]LORPLQRPUHåMHPGHO =DKWHYH
]DIL]LþQHLQSRGDWNRYQHSRYH]RYDOQHSODVWL]DEUH]åLþQRNRPXQLNDFLMR ,62
Road vehicles - Vehicle to grid communication interface - Part 8: Physical layer and data
link layer requirements for wireless communication (ISO 15118-8:2018)
Véhicules routiers - Interface de communication entre véhicule et réseau électrique -
Partie 8: Exigences relatives à la couche physique et à la couche liaison de données
pour la communication sans fil (ISO 15118-8:2018)
Ta slovenski standard je istoveten z: EN ISO 15118-8:2019
ICS:
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 15118-8
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2019
EUROPÄISCHE NORM
ICS 43.120
English Version
Road vehicles - Vehicle to grid communication interface -
Part 8: Physical layer and data link layer requirements for
wireless communication (ISO 15118-8:2018)
Véhicules routiers - Interface de communication entre
véhicule et réseau électrique - Partie 8: Exigences
relatives à la couche physique et à la couche de liaison
entre les données pour la communication sans fil (ISO
15118-8:2018)
This European Standard was approved by CEN on 28 December 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15118-8:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 15118-8:2018 has been prepared by Technical Committee ISO/TC 22 "Road vehicles” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 15118-
8:2019 by Technical Committee CEN/TC 301 “Road vehicles” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2019, and conflicting national standards shall
be withdrawn at the latest by August 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15118-8:2018 has been approved by CEN as EN ISO 15118-8:2019 without any
modification.
INTERNATIONAL ISO
STANDARD 15118-8
First edition
2018-03
Road vehicles — Vehicle to grid
communication interface —
Part 8:
Physical layer and data link
layer requirements for wireless
communication
Véhicules routiers — Interface de communication entre véhicule et
réseau électrique —
Partie 8: Exigences relatives à la couche physique et à la couche
liaison de données pour la communication sans fil
Reference number
ISO 15118-8:2018(E)
©
ISO 2018
ISO 15118-8:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
ISO 15118-8:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 Conventions . 3
5.1 Definition of OSI based services . 3
5.2 Requirement structure . 3
6 System architecture . 3
7 Wireless communication requirements . 4
7.1 Overview . 4
7.2 SECC requirements . 5
7.2.1 General. 5
7.2.2 WLAN technology . 5
7.2.3 WLAN frequency and channel . 6
7.2.4 SECC channel scanning and selection . 8
7.2.5 Quality of service . 9
7.2.6 Association support .10
7.2.7 Layer 2 interfaces .14
7.2.8 Pairing .14
7.3 EVCC requirements .15
7.3.1 General.15
7.3.2 WLAN technology .15
7.3.3 WLAN frequency and channel .15
7.3.4 Quality of service .16
7.3.5 Association support .16
7.3.6 Layer 2 interfaces .18
7.4 Security .19
Annex A (informative) Mounting location of wireless communication module and antenna .20
Annex B (informative) Interference scan and auto channel selection example .24
Annex C (informative) Introduction of service available area .27
Annex D (informative) National regulations in usage of U-NII bands .29
Bibliography .34
ISO 15118-8:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.