Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles

This European Standard applies to rear loaded refuse collection vehicles (RCV), as defined in 3.2.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the rear loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This European Standard is applicable to the design and construction of the rear loaded RCV so as to ensure that it is fit for its function and can be operated, adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the rear loaded RCV.
This part 1 describes and defines the safety requirements of rear loaded RCVs excluding the interface tailgate/discharge door with the lifting device(s) and the lifting device(s) as illustrated in Figure A.1.
Safety requirements for the lifting device(s) and the interface with the tailgate/discharge door are defined in EN 1501-5.
This European Standard is not applicable to:
-   operation in severe conditions, e.g. extreme environmental conditions such as:
-   below - 25 °C and above + 40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot wastes, acids and bases, radioactive materials, contaminated waste, especially fragile loads, explosives);
-   operation on ships.
This European Standard is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

Abfallsammelfahrzeuge - Allgemeine Anforderungen und Sicherheitsanforderungen - Teil 1: Hecklader

Diese Europäische Norm gilt für Hecklader-Abfallsammelfahrzeuge, wie nach 3.2 definiert.
Diese Europäische Norm behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Ereignisse
im Hinblick auf Hecklader-ASF bei bestimmungsgemäßem Gebrauch und bei Zuständen von Missbrauch,
welche vom Hersteller während der voraussichtlichen Lebensdauer vernünftigerweise vorhersehbar sind, wie
in Abschnitt 4 festgelegt.
Diese Europäische Norm gilt für die Gestaltung und Konstruktion eines Hecklader-ASF, um sicherzustellen,
dass es für seine Aufgabe geeignet ist und dass es während seiner gesamten Lebensdauer betrieben,
eingestellt und instand gehalten werden kann. Sie gilt nicht für das Ende der Lebensdauer des Hecklader-
ASF.
Dieser Teil 1 beschreibt und bestimmt die Sicherheitsanforderungen für Hecklader-ASF unter Ausschluss der
Schnittstelle Heckteil/Entladetür mit Schüttung(en) und der(n) Schüttung(en) selbst, wie in Bild A.1
beschrieben.
Sicherheitsanforderungen für die Schüttung(en) und die Schnittstelle mit der Heckteil/Entladungstür sind in
EN 1501-5 spezifiziert.
Diese Norm gilt nicht für:
⎯ Betrieb unter Extrembedingungen, z. B. extreme Umgebungsbedingungen, wie:
⎯ Temperaturen unter −25 °C und über +40 °C;
⎯ tropische Umgebung;
⎯ Windgeschwindigkeiten von mehr als 75 km/h;
⎯ verunreinigende Umgebung;
⎯ korrosive Atmosphäre;
⎯ Betrieb in explosionsfähigen Atmosphären;
⎯ Handhabung von Ladungen, die Gefährdungssituationen auslösen können (z. B. heiße Abfälle, Säuren
und Basen, radioaktive Stoffe, verunreinigter Abfall, besonders zerbrechliche Ladungen, Explosivstoffe);
⎯ Einsatz auf Schiffen.
Diese Europäische Norm gilt nicht für Maschinen, die vor dem Datum der Veröffentlichung dieses
Dokumentes durch CEN hergestellt wurden.

Bennes de collecte des déchets - Exigences générales et exigences de sécurité - Partie 1 : Bennes à chargement arrière

La présente Norme européenne s’applique aux bennes de collecte des déchets (B.C.D.) à chargement arrière, telles que définies en 3.2.
La présente Norme européenne traite de tous les dangers, situations et phénomènes dangereux importants relatifs aux B.C.D. à chargement arrière, tels que définis à l’Article 4, lorsqu’elles sont utilisées conformément aux attentes et dans des conditions de mauvaise utilisation raisonnablement prévisibles par le constructeur, durant toute leur durée de vie prévue.
La présente Norme européenne est applicable à la conception et à la construction des B.C.D. à chargement arrière, en vue de garantir que les bennes puissent accomplir leur fonction et être utilisées, ajustées et entretenues durant tout leur cycle de vie. Elle ne s’applique pas à la fin de vie des B.C.D. à chargement arrière.
La partie 1 décrit et définit les exigences de sécurité des B.C.D. à chargement arrière, à l’exclusion de l’interface porte arrière/porte de déchargement avec le(s) lève-conteneurs et du (des) lève-conteneurs, telle qu’illustrée à la Figure A.1.
Les exigences de sécurité des lève-conteneurs et de l’interface avec la porte arrière/porte de déchargement sont définies dans l’EN 1501-5.
La présente Norme européenne ne s’applique pas :
-   au fonctionnement dans des conditions difficiles, par exemple, des conditions environnementales extrêmes, telles que :
-   des températures inférieures à - 25 °C et supérieures à + 40 °C ;
-   un environnement tropical ;
-   une vitesse de vent dépassant 75 km/h ;
-   aux milieux polluants ;
-   aux environnements corrosifs ;
-   au fonctionnement dans des atmosphères potentiellement explosives ;
-   à la manutention de chargements dont la nature pourrait donner lieu à des situations dangereuses (par exemple, déchets chauds, acides et bases, matériaux radioactifs, déchets contaminés, chargements particulièrement fragiles, explosifs) ;
-   au fonctionnement sur les navires.
La présente Norme européenne ne s’applique pas aux machines fabriquées avant la date de publication de ce document par le CEN.

Vozila za zbiranje odpadkov - Splošne in varnostne zahteve - 1. del: Vozila za zbiranje odpadkov z nakladanjem zadaj

General Information

Status
Withdrawn
Publication Date
07-Apr-2015
Withdrawal Date
30-Mar-2021
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
31-Mar-2021

Relations

Buy Standard

Standard
EN 1501-1:2011+A1:2015
English language
60 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vozila za zbiranje odpadkov - Splošne in varnostne zahteve - 1. del: Vozila za zbiranje odpadkov z nakladanjem zadajAbfallsammelfahrzeuge - Allgemeine Anforderungen und Sicherheitsanforderungen - Teil 1: HeckladerBennes de collecte des déchets - Exigences générales et exigences de sécurité - Partie 1 : Bennes à chargement arrièreRefuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles43.160Vozila za posebne nameneSpecial purpose vehicles13.030.40Naprave in oprema za odstranjevanje in obdelavo odpadkovInstallations and equipment for waste disposal and treatmentICS:Ta slovenski standard je istoveten z:EN 1501-1:2011+A1:2015SIST EN 1501-1:2011+A1:2015en,fr,de01-junij-2015SIST EN 1501-1:2011+A1:2015SLOVENSKI
STANDARDSIST EN 1501-1:20111DGRPHãþD



SIST EN 1501-1:2011+A1:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1501-1:2011+A1
April 2015 ICS 43.160 Supersedes EN 1501-1:2011English Version
Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
Bennes de collecte des déchets - Exigences générales et exigences de sécurité - Partie 1 : Bennes à chargement arrière
Abfallsammelfahrzeuge - Allgemeine Anforderungen und Sicherheitsanforderungen - Teil 1: Hecklader This European Standard was approved by CEN on 11 June 2011 and includes Amendment 1 approved by CEN on 5 January 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1501-1:2011+A1:2015 ESIST EN 1501-1:2011+A1:2015



EN 1501-1:2011+A1:2015 (E) 2 Contents Page Foreword .4 Introduction .6 1 Scope .7 2 Normative references .7 3 Terms and definitions .9 4 List of significant hazards . 13 5 Safety requirements and/or protective measures . 17 5.1 General . 17 5.2 Compaction mechanism . 17 5.3 Discharge system . 19 5.4 Requirements for the waste container lifting device(s) . 21 5.5 Position of the waste container lifting device in relation to the tailgate or discharge door . 21 5.6 Satellite vehicle . 21 5.7 Hydraulic, pneumatic and electric powered systems .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.