iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 7096:2008/AC:2009

(Corrigendum)

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)

TC - Deletion of the Annex ZA (concerns the EN ISO standard version only).

Erdbaumaschinen - Laborverfahren zur Bewertung der Schwingungen des Maschinenführersitzes (ISO 7096:2000)

Engins de terrassement - Évaluation en laboratoire des vibrations transmises à l'opérateur par le siège (ISO 7096:2000)

Stroji za zemeljska dela - Laboratorijski postopek za ovrednotenje vibracij voznikovega sedeža (ISO 7096:2000)

General Information

Status
Withdrawn
Publication Date
26-May-2009
Withdrawal Date
10-Mar-2020
ICS
13.160 - Vibration and shock with respect to human beings
53.100 - Earth-moving machinery
Technical Committee
CEN/TC 151 - Construction equipment and building material machines - Safety
Drafting Committee
CEN/TC 151/WG 1 - Earth-moving machinery - Safety
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
11-Mar-2020
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN ISO 7096:2008/AC:2009 - Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)

Relations

Replaced By
EN ISO 7096:2020 - Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)
Effective Date
24-Mar-2020
Corrects
EN ISO 7096:2008 - Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 7096:2008/AC:2009EN ISO 7096:2008/AC:2009
PreviousNext
Corrigendum
EN ISO 7096:2008/AC:2009
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stroji za zemeljska dela - Laboratorijski postopek za ovrednotenje vibracij voznikovega sedeža (ISO 7096:2000)Erdbaumaschinen - Laborverfahren zur Bewertung der Schwingungen des Maschinenführersitzes (ISO 7096:2000)Engins de terrassement - Évaluation en laboratoire des vibrations transmises à l'opérateur par le siège (ISO 7096:2000)Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)53.100Stroji za zemeljska delaEarth-moving machinery13.160Vpliv vibracij in udarcev na ljudiVibration and shock with respect to human beingsICS:Ta slovenski standard je istoveten z:EN ISO 7096:2008/AC:2009SIST EN ISO 7096:2008/AC:2009en,fr,de01-september-2009SIST EN ISO 7096:2008/AC:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 7096:2008/AC
May 2009
Mai 2009
Mai 2009 ICS 13.160; 53.100 English version Version Française Deutsche Fassung
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)
Engins de terrassement - Évaluation en laboratoire des vibrations transmises à l'opérateur par le siège (ISO 7096:2000)
Erdbaumaschinen - Laborverfahren zur Bewertung der Schwingungen des Maschinenführersitzes (ISO 7096:2000) This corrigendum becomes effectiv
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 7096:2020(Main)
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)
SIST EN ISO 7096:2020

1.1  This document specifies, in accordance with ISO 10326‑1:2016, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator of earth-moving machines at frequencies between 1 Hz and 20 Hz. It also specifies acceptance criteria for application to seats on different machines.
1.2  This document is applicable to operator seats used on earth-moving machines as defined in ISO 6165.
1.3  This document defines the input spectral classes required for the following earth-moving machines. Each class defines a group of machines having similar vibration characteristics:
—     rigid-frame dumpers >4 500 kg operating mass;
—     articulated-frame dumpers;
—     scrapers without axle or frame suspension[1];
—     wheeled loaders >4 500 kg operating mass;
—     graders;
—     wheeled dozers;
—     soil compactors;
—     backhoe loaders;
—     crawler dumpers;
—     crawler loaders;
—     crawler-dozers ≤50 000 kg operating mass[2];
—     compact dumpers ≤4 500 kg operating mass;
—     wheeled compact loaders ≤4 500 kg operating mass;
—     skid-steer loaders, wheeled ≤4 500 kg and tracked ≤6 000 kg operating mass.
1.4  The following machines impart sufficiently low vertical vibration inputs at frequencies between 1 Hz and 20 Hz to the seat during operation that these seats do not require suspension for the attenuation of transmitted vibration:
—     excavators, including walking excavators and cable excavators[3];
—     trenchers;
—     landfill compactors;
—     non-vibratory rollers, except soil compactors;
—     vibratory rollers, except soil compactors;
—     pipelayers;
—     horizontal directional drills (HDD).
1.5  The tests and criteria defined in this document are intended for operator seats used in earth-moving machines of conventional design.
NOTE    Other tests can be appropriate for machines with design features that result in significantly different vibration characteristics.
1.6  Vibration which reaches the operator other than through the seat, for example that sensed by the operator's feet on the platform or control pedals or by the operator´s hands on the steering-wheel, is not covered.
[1]     For scrapers with suspension, either a seat with no suspension can be used, or one having a suspension with high damping.
[2]     For crawler dozers greater than 50 000 kg, the seat performance requirements are suitably provided by a cushion type seat.
[3]     For excavators, the predominant vibration is generally in the fore and aft (X) axis.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 15730:2008(Main)
Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufacturers (ISO/TR 25398:2006)
SIST-TS CEN/TS 15730:2008

ISO/TR 25398:2006 provides guidelines for those such as employers, national authorities and manufacturers of earth-moving machinery who are required to determine, assess and document the daily whole body vibration exposure for ride-on machines as defined in ISO 6165. It also provides guidelines for reducing vibration levels on machines and for determining the vibration reduction from machine improvements to reduce vibration levels. It is intended to assist in establishing documentation for specific earth-moving machinery under typical operating conditions.

  • Technical specification
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7096:2020(Main)
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)
SIST EN ISO 7096:2020

1.1  This document specifies, in accordance with ISO 10326‑1:2016, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator of earth-moving machines at frequencies between 1 Hz and 20 Hz. It also specifies acceptance criteria for application to seats on different machines.
1.2  This document is applicable to operator seats used on earth-moving machines as defined in ISO 6165.
1.3  This document defines the input spectral classes required for the following earth-moving machines. Each class defines a group of machines having similar vibration characteristics:
—     rigid-frame dumpers >4 500 kg operating mass;
—     articulated-frame dumpers;
—     scrapers without axle or frame suspension[1];
—     wheeled loaders >4 500 kg operating mass;
—     graders;
—     wheeled dozers;
—     soil compactors;
—     backhoe loaders;
—     crawler dumpers;
—     crawler loaders;
—     crawler-dozers ≤50 000 kg operating mass[2];
—     compact dumpers ≤4 500 kg operating mass;
—     wheeled compact loaders ≤4 500 kg operating mass;
—     skid-steer loaders, wheeled ≤4 500 kg and tracked ≤6 000 kg operating mass.
1.4  The following machines impart sufficiently low vertical vibration inputs at frequencies between 1 Hz and 20 Hz to the seat during operation that these seats do not require suspension for the attenuation of transmitted vibration:
—     excavators, including walking excavators and cable excavators[3];
—     trenchers;
—     landfill compactors;
—     non-vibratory rollers, except soil compactors;
—     vibratory rollers, except soil compactors;
—     pipelayers;
—     horizontal directional drills (HDD).
1.5  The tests and criteria defined in this document are intended for operator seats used in earth-moving machines of conventional design.
NOTE    Other tests can be appropriate for machines with design features that result in significantly different vibration characteristics.
1.6  Vibration which reaches the operator other than through the seat, for example that sensed by the operator's feet on the platform or control pedals or by the operator´s hands on the steering-wheel, is not covered.
[1]     For scrapers with suspension, either a seat with no suspension can be used, or one having a suspension with high damping.
[2]     For crawler dozers greater than 50 000 kg, the seat performance requirements are suitably provided by a cushion type seat.
[3]     For excavators, the predominant vibration is generally in the fore and aft (X) axis.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10326-1:2016(Main)
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02)
SIST EN ISO 10326-1:2017

ISO 10326-1:2016 specifies basic requirements for the laboratory testing of vibration transmission through a vehicle seat to the occupant. These methods for measurement and analysis make it possible to compare test results from different laboratories for equivalent seats.
It specifies the test method, the instrumentation requirements, the measuring assessment method and the way to report the test result.
ISO 10326-1:2016 applies to specific laboratory seat tests which evaluate vibration transmission to the occupants of any type of seat used in vehicles and mobile off-road machinery.
Application standards for specific vehicles refer to this document when defining the test input vibration that is typical for the vibration characteristics of the type or class of vehicle or machinery in which the seat is to be fitted.
NOTE          Examples of application standards are given in the bibliography.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 15730:2008(Main)
Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufacturers (ISO/TR 25398:2006)
SIST-TS CEN/TS 15730:2008

ISO/TR 25398:2006 provides guidelines for those such as employers, national authorities and manufacturers of earth-moving machinery who are required to determine, assess and document the daily whole body vibration exposure for ride-on machines as defined in ISO 6165. It also provides guidelines for reducing vibration levels on machines and for determining the vibration reduction from machine improvements to reduce vibration levels. It is intended to assist in establishing documentation for specific earth-moving machinery under typical operating conditions.

  • Technical specification
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16931-8:2024(Main)
Electronic invoicing - Part 8: Semantic data model of the elements of an e-receipt or a simplified electronic invoice
kSIST FprEN 16931-8:2024

This document establishes a semantic data model of an e-receipt or a simplified electronic invoice.
NOTE   In the remainder of this document, when “e-receipt” is mentioned, “simplified invoice” is also meant.
The semantic model includes essential information elements that an electronic receipt needs to ensure legal (including fiscal) compliance and to enable interoperability for cross-border, cross sector and domestic trade. The semantic model can be used by organizations in the private and the public sector for documenting by issuing a receipt for the purchase of services and /or goods. It can also be used for documenting a purchase between private sector enterprises. In addition, it has been designed for the use of consumers.

  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19403-5:2024(Main)
Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2024)
kSIST FprEN ISO 19403-5:2024

This document specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids by optical methods. The method can be applied for the characterization of liquid coating materials.
If applied to liquids with non-Newtonian flow behaviour (see ISO 3219-1:2021, 3.22), restrictions can apply.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16286-1:2024(Main)
Railway applications - Gangway systems between vehicles - Part 1: Main applications
SIST EN 16286-1:2024

This document specifies the technical and safety requirements applicable to gangway systems used in heavy rail and urban rail vehicles that are designed to allow passengers or staff to move between adjacent vehicles.
It also specifies:
- the requirements for the safety for passengers and/or staff in the gangway while the train is running,
- the assessment methods as well as pass/fail criteria for gangways installed on vehicles.
NOTE Some requirements in this document may not be applicable for gangways designed for use by staff only.
This document is not intended to specify requirements for articulation systems which can be an integral part of gangway systems.
This document is not applicable for rubber tube gangways and interconnecting gangways for coaches travelling at speeds of up to 200 km/h on high-speed lines with tunnel sections. Information about these types of gangway systems are given in Annex A and Annex B.

  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17966:2024(Main)
Fire protection equipment - Carbon dioxide extinguishing systems for use on premises - Design and installation (ISO 6183:2022, modified)
SIST EN 17966:2024

This document specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of fixed carbon dioxide firefighting systems in buildings, plants or other structures. It is not applicable to extinguishing systems on ships, in aircraft, on vehicles or on mobile fire appliances, or to below ground systems in the mining industry; nor does it apply to carbon dioxide pre-inerting systems.
Design of systems where unclosable opening(s) of the protected volume exceed a specified area and where the opening(s) can be subject to the effect of wind is not specified, although general guidance on the procedure to be followed in such cases is given (see 7.4.3.2).

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21009-2:2024(Main)
Cryogenic vessels - Static vacuum-insulated vessels - Part 2: Operational requirements (ISO 21009-2:2024)
SIST EN ISO 21009-2:2024

This document specifies operational requirements for static vacuum insulated vessels designed for a maximum allowable pressure of more than 50 kPa (0,5 bar). It can also be used as a guideline for vessels designed for a maximum allowable pressure of less than 50 kPa (0,5 bar).
This document applies to vessels designed for cryogenic fluids specified in ISO 21009-1.
Static cryogenic vessels are often partly equipped by the manufacturer, but can be installed or re- installed by another party, such as the operator, user or owner.
NOTE 1        For the installation of these vessels, additional requirements can apply.
NOTE 2        Some requirements of this document can be covered by local regulations, e.g. safety distances, occupational safety and health.
NOTE 3        Additional requirements can apply to the operation of large scale and field-fabricated vessels.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day