EN 1714:1997/A2:2003

Non-destructive testing of welds - Ultrasonic testing of welded joints

This European Standard specifies methods for the manual ultrasonic examination of fusion welded joints in metallic materials equal to and above 8 mm thick which exhibit low ultrasonic attenuation (especially that due to scatter). It is primarily intended for use on full penetration welded joints where both the welded and parent material are ferritic.  Where specified and appropriate, techniques may also be used :  - on materials other than those stated ;  - on partial penetration welds ;  - with automated equipment  by agreement between the contracting parties.  Where material dependent ultrasonic values are specified in this standard they are based on steels having an ultrasonic sound velocity of 5920 ñ 50 m/s for longitudinal waves, and 3255 ñ 30 m/s for transverse waves. This is to be taken into account when examining materials with a different velocity.   The standard specifies four examination levels, each corresponding to a different probability of detection of imperfections. Guidance on the selection of examination levels A, B and C is given in annex A. The requirements of the fourth examination level, which is intended for special applications, are in accordance with the general requirements of this standard and as agreed between the contracting parties.  This standard, by agreement between the contracting parties, permits assessment of indications, for acceptance purposes, by either of the following methods :  1) Evaluation based primarily on length and echo  amplitude of the signal indication ;  2) Evaluation based on characterization and sizing of the indication by probe movement methods.

Zerstörungsfreie Prüfung von Schweißverbindungen - Ultraschallprüfung von Schweißverbindungen

Diese Norm legt Verfahren zur manuellen Ultraschallprüfung von Schmelzschweiß-verbindungen in metallischen Werkstoffen mit Dicken gleich und größer als 8 mm geringer Ultraschallschwächung (verursacht vor allem durch Streuung) fest. Sie gilt bevorzugt für ferritische Schweißverbindungen (Grundmaterial und Schweißgut) mit vollangeschlossenem Querschnitt. Die angegebenen Prüftechniken dürfen auch in anderen Fällen angewendet werden, z.B. bei: - anderen Werkstoffen als aufgeführt; - nicht vollangeschlossenen Schweißnähten; - Prüfung mit automatisierten Anlagen.

Contrôle non destructif des assemblages soudés - Contrôle par ultrasons des assemblages soudés

La présente norme spécifie des méthodes de contrôle manuel par ultrasons des assemblages en matériaux métalliques soudés par fusion d'épaisseur égale ou supérieure à 8 mm présentant une atténuation relativement faible des ultrasons (due en particulier à la diffusion). Elle vise particulièrement les assemblages soudés à pleine pénétration dont le métal de base et la soudure sont ferritiques. Lorsqu'elles sont spécifiées et appropriées, ces techniques peuvent également être utilisées: - pour des matériaux autres que ceux indiqués; - sur des soudures à pénétration partielle; - avec équipement autom.

Neporušitvena preiskava zvarov - Ultrazvočna preiskava zvarnih spojev

General Information

• Status: Withdrawn
• Publication Date: 09-Dec-2003
• Withdrawal Date: 14-Dec-2010
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 5 - Testing of welds (destructive and non-destructive)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2010
• Completion Date: 15-Dec-2010
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 1714:1999/A2:2004 - Non-destructive testing of welds - Ultrasonic testing of welded joints

Relations

• Replaced By: EN ISO 17640:2010 - Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
• Effective Date: 18-Dec-2010
• Amends: EN 1714:1997 - Non-destructive examination of welds - Ultrasonic examination of welded joints
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1714:1999/A2:2004
01-junij-2004
1HSRUXãLWYHQDSUHLVNDYD]YDURY8OWUD]YRþQDSUHLVNDYD]YDUQLKVSRMHY
Non-destructive testing of welds - Ultrasonic testing of welded joints
Zerstörungsfreie Prüfung von Schweißverbindungen - Ultraschallprüfung von
Schweißverbindungen
Contrôle non destructif des assemblages soudés - Contrôle par ultrasons des
assemblages soudés
Ta slovenski standard je istoveten z: EN 1714:1997/A2:2003
ICS:
25.160.40 Varjeni spoji in vari Welded joints
SIST EN 1714:1999/A2:2004 en
2003-01.Slovenski inštitut za st
...