EN 62745:2017
(Main)Safety of machinery - Requirements for cableless control systems of machinery
Safety of machinery - Requirements for cableless control systems of machinery
IEC 62745:2017(E) specifies requirements for the functionality and interfacing of cableless (for example, radio, infra-red) control systems that provide communication between operator control station(s) and the control system of a machine. Specific requirements are included for such operator control stations that are portable by the operator.
Sicherheit von Maschinen - Anforderungen für kabellose Steuerungen an Maschinen
Sécurité des machines - Exigences générales pour les systèmes de commande sans fil des machines
IEC 62745:2017 spécifie les exigences de fonctionnalité d'un système de commande sans fil, qu'il soit interfacé avec ou qu'il fasse partie intégrante d'un système de commande de machine destiné à être utilisé comme poste de commande opérateur sur une machine.
Varnost strojev - Splošne zahteve za brezžično povezavo upravljalnikov e nadzornih sistemov strojev (IEC 62745:2017)
Standard IEC 62745:2017 določa zahteve za funkcionalnost in brezžično povezavo (npr. radijskih, infrardečih) nadzornih sistemov, ki zagotavljajo komunikacijo med nadzornimi postajami operaterja in nadzornim sistemom stroja. Posebne zahteve so vključene za takšne nadzorne postaje operaterja, ki jih lahko operater prenaša.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2017
9DUQRVWVWURMHY6SORãQH]DKWHYH]DEUH]åLþQRSRYH]DYRXSUDYOMDOQLNRYH
QDG]RUQLKVLVWHPRYVWURMHY ,(&
Safety of machinery - General requirements for cableless control systems of machinery
(IEC 62745:2017)
Sicherheit von Maschinen - Anforderungen für kabellose Steuerungen an Maschinen
(IEC 62745:2017)
6pFXULWpGHVPDFKLQHV±([LJHQFHVJpQpUDOHVSRXUOHVV\VWqPHVGHFRPPDQGHVDQVILO
GHVPDFKLQHV ,(&
,(&
Ta slovenski standard je istoveten z: EN 62745:2017
ICS:
13.110 Varnost strojev Safety of machinery
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62745
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2017
ICS 13.110; 29.020; 35.100.01
English Version
Safety of machinery - Requirements for cableless control
systems of machinery
(IEC 62745:2017)
Sécurité des machines - Exigences générales pour les Sicherheit von Maschinen - Anforderungen für kabellose
systèmes de commande sans fil des machines Steuerungen an Maschinen
(IEC 62745:2017) (IEC 62745:2017)
This European Standard was approved by CENELEC on 2017-04-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62745:2017 E
European foreword
The text of document 44/783/FDIS, future edition 1 of IEC 62745, prepared by IEC/TC 44 “Safety of
machinery - Electrotechnical aspects" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 62745:2017.
The following dates are fixed:
(dop) 2018-01-11
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-04-11
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62745:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-2-1 NOTE Harmonized as EN 60068-2-1.
IEC 60068-2-2 NOTE Harmonized as EN 60068-2-2.
IEC 60068-2-6 NOTE Harmonized as EN 60068-2-6.
IEC 60068-2-27 NOTE Harmonized as EN 60068-2-27.
IEC 60068-2-30 NOTE Harmonized as EN 60068-2-30.
IEC 60068-2-64 NOTE Harmonized as EN 60068-2-64.
IEC 60204 (Series) NOTE Harmonized as EN 60204 (Series).
IEC 60870-5-1 NOTE Harmonized as EN 60870-5-1.
IEC 60947-5-8 NOTE Harmonized as EN 60947-5-8.
IEC 61508 (Series) NOTE Harmonized as EN 61508 (Series).
IEC 61784-1 NOTE Harmonized as EN 61784-1.
IEC 61784-3:2016 NOTE Harmonized as EN 61784-3:2016.
ISO 12100 NOTE Harmonized as EN ISO 12100.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-31 2008 Environmental testing -- Part 2-31: Tests - EN 60068-2-31 2008
Test Ec: Rough handling shocks, primarily
for equipment-type specimens
IEC 60204-1 (mod) 2005 Safety of machinery - Electrical equipment EN 60204-1 2006
of machines -- Part 1: General
requirements
- - + corrigendum Feb. 2010
IEC 60947-5-1 2016 Low-voltage switchgear and controlgear - EN 60947-5-1 2016
Part 5-1: Control circuit devices and
switching elements - Electromechanical
control circuit devices
IEC 60947-5-5 - Low-voltage switchgear and controlgear -- EN 60947-5-5 -
Part 5-5: Control circuit devices and
switching elements - Electrical emergency
stop device with mechanical latching
function
IEC 62061 - Safety of machinery - Functional safety of EN 62061 -
safety-related electrical, electronic and
programmable electronic control systems
ISO 13849-1 - Safety of machinery - Safety-related parts EN ISO 13849-1 -
of control systems - Part 1: General
principles for design
ISO 13849-2 - Safety of machinery - Safety-related parts EN ISO 13849-2 -
of control systems - Part 2: Validation
ISO 13850 - Safety of machinery - Emergency stop EN ISO 13850 -
function - Principles for design
IEC 62745 ®
Edition 1.0 2017-03
INTERNATIONAL
STANDARD
colour
inside
Safety of machinery – Requirements for cableless control systems of machinery
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 13.110; 29.020; 35.100.01 ISBN 978-2-8322-4013-7
– 2 – IEC 62745:2017 © IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviations . 8
4 Functional requirements . 11
4.1 General . 11
4.2 Operational preventions . 12
4.2.1 Prevention of inadvertent actuation . 12
4.2.2 Prevention of unauthorised operation . 12
4.2.3 Prevention of unintended commands . 12
4.3 Serial data transfer . 13
4.4 Removal of remote station transmission . 13
4.5 Establishment and indication of transmission and communication . 14
4.6 Safety-related functions of the CCS . 14
4.7 Stop functions of the CCS . 14
4.7.1 General . 14
4.7.2 Safety-related stop functions of a CCS . 14
4.7.3 Classification of stop functions . 15
4.8 Reset . 17
4.9 Cessation of transmission from the remote station . 17
4.10 Latching control functions . 17
4.11 Behaviour on loss of supply . 18
4.12 Multiple remote stations . 18
4.13 Multiple base stations . 18
4.14 Suspension of CCS control . 18
4.15 Configurability protection . 19
5 Verification . 19
5.1 General . 19
5.2 Labelling and markings . 19
5.3 Documentation . 19
5.4 Functional verifications . 19
6 Information for use . 22
6.1 General . 22
6.2 Information to be provided . 22
7 Labelling and markings . 24
Annex A (informative) Logic of stop functions . 25
Bibliography . 27
Figure 1 – Block diagram example of a cableless control system and its interaction with
the machine control system . 12
Figure A.1 – Logic for stop functions . 25
Table 1 – Alphabetical list of definitions . 8
Table 2 – Abbreviations . 8
IEC 62745:2017 © IEC 2017 – 3 –
Table 3 – Overview of stop functions of the CCS . 15
Table 4 – Verification of functional requirements . 21
Table 5 – List of possible verifications to be required to the system integrator . 24
– 4 – IEC 62745:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SAFETY OF MACHINERY – REQUIREMENTS FOR
CABLELESS CONTROL SYSTEMS OF MACHINERY
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.