EN 60309-2:1999/A11:2004

Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

D124/111: To be dealt with by BTWG 112-1 * Superseded by EN 60309-2:1999/A1:2007

Stecker, Steckdosen und Kupplungen für industrielle Anwendungen - Teil 2: Anforderungen und Hauptmaße für die Austauschbarkeit von Stift- und Buchsensteckvorrichtungen

Prises de courant pour usages industriels - Partie 2: Règles d'interchangeabilité dimensionnelle pour les appareils à broches et alvéoles

Vtiči, vtičnice in spojke za industrijske namene – 2. del: Zahteve za dimenzijsko medsebojno zamenjljivost pri priboru s trni ali cevastimi kontakti

Ta točka 1. dela ali 2. dela se uporablja, razen kot sledi: Zamenjava prvega odstavka z naslednjim besedilom: Ta del standarda IEC 60309 se uporablja za avtonomne izdelke, ki so združeni v enem ohišju, vtičnici ali priključku v skladu s standardom IEC 60309-1 ali IEC 60309-2, ter stikalno napravo z nazivno obratovalno napetostjo, ki ne presega 690 V enosmerne ali izmenične napetosti in 500 Hz, ter nazivnim tokom, ki ne presega 250 A, in so namenjeni predvsem za industrijsko uporabo v notranjih prostorih ali na prostem. Ti izdelki lahko vsebujejo zaporne in/ali varovalne naprave.

General Information

• Status: Withdrawn
• Publication Date: 17-May-2004
• Withdrawal Date: 31-Oct-2004
• ICS: 29.120.30 - Plugs, socket-outlets, couplers
• Technical Committee: CLC/TC 23H - Plugs, Socket-outlets and Couplers for industrial and similar applications, and for Electric Vehicles
• Drafting Committee: IEC/SC 23H - IEC_SC_23H
• Parallel Committee: IEC/SC 23H - IEC_SC_23H
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Nov-2009
• Completion Date: 01-Nov-2009
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Directive: 96/48/EC - Interoperability of the trans-European high-speed rail system
• Ref Project: SIST EN 60309-2:2000/A11:2006 - Plugs, socket-outlets and couplers for industrial purposes -- Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

Relations

• Replaced By: EN 60309-2:1999/A1:2007 - Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 60309-2:2022 - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
• Effective Date: 23-Jan-2023
• Amends: EN 60309-2:1999 - Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
• Effective Date: 28-Jan-2023

Standards Content (Sample)

EUROPEAN STANDARD EN 60309-2/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2004

ICS 29.120.30


English version


Plugs, socket-outlets and couplers for industrial purposes
Part 2: Dimensional interchangeability requirements
for pin and contact-tube accessories


Prises de courant pour usages industriels Stecker, Steckdosen und Kupplungen
Partie 2: Règles d'interchangeabilité für industrielle Anwendungen
dimensionnelle pour les appareils Teil 2: Anforderungen und Hauptmaße
à broches et alvéoles für die Austauschbarkeit von Stift-
und Buchsensteckvorrichtungen






This amendment A11 modifies the European Standard EN 60309-2:1999; it was approved by CENELEC
on 2004-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60309-2:1999/A11:2004 E

---------------------- Page: 1 ----------------------

EN 60309-2:19
...