EN 60309-2:1999

Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

Applies to plugs and socket-outlets, cable couplers with a rated operating voltage not exceeding 690 V, 500 Hz and a rated current not exceeding 125 A. , primarily intented for industrial use , either indoors or outdoors.

Stecker, Steckdosen und Kupplungen für industrielle Anwendungen - Teil 2: Anforderungen und Hauptmaße für die Austauschbarkeit von Stift- und Buchsensteckvorrichtungen

Prises de courant pour usages industriels - Partie 2: Règles d'interchangeabilité dimensionnelle pour les appareils à broches et alvéoles

S'applique aux prises de courant, aux prolongateurs et aux connecteurs ayant une tension nominale d'emploi ne dépassant pas 690 V, 500 Hz et un courant nominal ne dépassant pas 125 A., destinés essentiellement aux usages industriels à l'intérieur ou à l'extérieur des bâtiments.

Vtiči, vtičnice in spojke za industrijske namene - 2. del: Zahteve za dimenzijsko izmenljivost pribora s trni in pušami (IEC 60309-2:1999)

Ta točka 1. dela ali 2. dela se uporablja, razen kot sledi: Zamenjava prvega odstavka z naslednjim besedilom: Ta del standarda IEC 60309 se uporablja za avtonomne izdelke, ki so združeni v enem ohišju, vtičnici ali priključku v skladu s standardom IEC 60309-1 ali IEC 60309-2, ter stikalno napravo z nazivno obratovalno napetostjo, ki ne presega 690 V enosmerne ali izmenične napetosti in 500 Hz, ter nazivnim tokom, ki ne presega 250 A, in so namenjeni predvsem za industrijsko uporabo v notranjih prostorih ali na prostem. Ti izdelki lahko vsebujejo zaporne in/ali varovalne naprave.

General Information

• Status: Published
• Publication Date: 02-Jun-1999
• ICS: 29.120.30 - Plugs, socket-outlets, couplers
• Technical Committee: CLC/TC 23H - Plugs, Socket-outlets and Couplers for industrial and similar applications, and for Electric Vehicles
• Drafting Committee: CLC/TC 23H/WG 1 - Low voltage plugs, socket-outlets and couplers for industrial purpose, industrial cable reels, and conversion adapters for industrial use
• Parallel Committee: IEC/SC 23H - IEC_SC_23H
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 03-Jun-1999
• Completion Date: 03-Jun-1999
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Directive: 96/48/EC - Interoperability of the trans-European high-speed rail system
• Mandate: M/468 - Standardisation mandate addressed to CEN and CENELEC and ETSI concerning the charging of electric vehicles
• Ref Project: SIST EN 60309-2:2000 - Plugs, socket-outlets and couplers for industrial purposes -- Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

Relations

• Replaces: EN 60309-2:1998 - Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 60309-2:2022 - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
• Effective Date: 21-Jun-2022
• Amended By: EN 60309-2:1999/A11:2004 - Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
• Effective Date: 28-Jan-2023
• Amended By: EN 60309-2:1999/A1:2007 - Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
• Effective Date: 28-Jan-2023
• Amended By: EN 60309-2:1999/A2:2012 - Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2000
1DGRPHãþD
SIST EN 60309-2:1999
9WLþLYWLþQLFHLQVSRMNH]DLQGXVWULMVNHQDPHQHGHO=DKWHYH]DGLPHQ]LMVNR
L]PHQOMLYRVWSULERUDVWUQLLQSXãDPL,(&
Plugs, socket-outlets and couplers for industrial purposes -- Part 2: Dimensional
interchangeability requirements for pin and contact-tube accessories
Stecker, Steckdosen und Kupplungen für industrielle Anwendungen -- Teil 2:
Anforderungen und Hauptmaße für die Austauschbar
...