EN 60598-2-3:2003
(Main)Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
Specifies requirements for luminaires for road and street lighting, for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 1 000 V.
Leuchten - Teil 2-3: Besondere Anforderungen - Leuchten für Straßen- und Wegebeleuchtung
Luminaires - Partie 2-3: Règles particulières - Luminaires d'éclairage public
Détaille les prescriptions applicables aux luminaires d'éclairage public à utiliser avec des lampes à filament de tungstène, des lampes tubulaires fluorescentes et autres lampes à décharge pour des tensions d'alimentation ne dépassant pas 1 000 V.
Svetilke - 2-3. del: Posebne zahteve - Svetilke za cestno in ulično razsvetljavo (IEC 60598-2-3:2002) (vsebuje popravek AC:2005)
General Information
Relations
Overview
EN 60598-2-3:2003 (adopted by CLC / CENELEC) is the European particular-requirements standard for luminaires for road and street lighting. It aligns with IEC 60598-2-3:2002 and applies to luminaires intended for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 1 000 V. This part is intended to be used together with EN 60598-1: Luminaires - Part 1: General requirements and tests and incorporates the corrigendum of August 2005.
Key topics and requirements
The standard defines particular requirements that supplement EN 60598-1. Key areas covered or referenced include:
- Scope and application for road and street lighting luminaires (public outdoor lighting).
- Compatibility with lamp types such as tungsten filament, tubular fluorescent and other discharge lamps on voltages ≤ 1 000 V.
- Cross-references to normative international standards relevant to outdoor lighting installations (for example IEC 60364-7-714 for outdoor lighting installations).
- Reference to environmental and mechanical testing standards (for example IEC 60068-2-75 for hammer tests).
- Normative and informative annex structure (annexes B and ZA are normative; annex A informative), with Annex ZA mapping to European normative references.
(Note: EN 60598-2-3 sets particular requirements that supplement general safety, mechanical, electrical and testing provisions given in EN 60598-1.)
Applications
EN 60598-2-3 is directly applicable to:
- Design and manufacturing of street, road and public outdoor lighting luminaires.
- Performance and compliance assessment for luminaires intended for highways, urban streets, residential roads and related public areas.
- Specifying requirements in procurement documents for municipal and highway lighting projects.
Who uses this standard
- Luminaire manufacturers - for product design, verification and CE/national compliance where applicable.
- Lighting designers and engineers - to ensure chosen luminaires meet safety and installation requirements for road and street projects.
- Test laboratories and certification bodies - to conduct particular tests and confirm conformity with the standard’s requirements.
- Public authorities and procurement teams - to define technical specifications for street lighting tenders.
- Installers and maintenance teams - for understanding operational constraints and installation references.
Related standards
- EN 60598-1: Luminaires - Part 1: General requirements and tests (mandatory companion document)
- IEC 60598-2-3:2002 (international text adopted by CENELEC)
- IEC 60364-7-714 (outdoor lighting installations)
- IEC 60068-2-75 (environmental hammer tests)
Keywords: EN 60598-2-3, luminaires for road and street lighting, street lighting standard, CLC/CENELEC, EN 60598-1, outdoor lighting requirements, lamp compatibility, supply voltage ≤1000 V.
Frequently Asked Questions
EN 60598-2-3:2003 is a standard published by CLC. Its full title is "Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting". This standard covers: Specifies requirements for luminaires for road and street lighting, for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 1 000 V.
Specifies requirements for luminaires for road and street lighting, for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 1 000 V.
EN 60598-2-3:2003 is classified under the following ICS (International Classification for Standards) categories: 29.140.40 - Luminaires; 93.080.30 - Road equipment and installations. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60598-2-3:2003 has the following relationships with other standards: It is inter standard links to EN 60598-2-3:1994, EN 60598-2-3:1994/A2:2001, EN 60598-2-3:1994/A1:1997, EN 60598-2-3:2003/A1:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60598-2-3:2003 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU, 2014/53/EU, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 60598-2-3:2003 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2004
1DGRPHãþD
SIST EN 60598-2-3:1995
SIST EN 60598-2-3:1995/A1:1999
SIST EN 60598-2-3:1995/A2:2003
6YHWLONHGHO 3RVHEQH]DKWHYH6YHWLONH]DFHVWQRLQXOLþQRUD]VYHWOMDYR ,(&
YVHEXMHSRSUDYHN$&
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
(IEC 60598-2-3:2002)
Leuchten - Teil 2-3: Besondere Anforderungen - Leuchten für Straßen- und
Wegebeleuchtung (IEC 60598-2-3:2002)
Luminaires - Partie 2-3: Règles particulières - Luminaires d'éclairage public (CEI 60598-
2-3:2002)
Ta slovenski standard je istoveten z: EN 60598-2-3:2003
ICS:
29.140.40 Svetila Luminaires
93.080.40 &HVWQDUD]VYHWOMDYDLQ Street lighting and related
SULSDGDMRþDRSUHPD equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60598-2-3
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2003
ICS 29.140.40; 93.080.30 Supersedes EN 60598-2-3:1994 + A1:1997 + A2:2001
Incorporates Corrigendum August 2005
English version
Luminaires
Part 2-3: Particular requirements -
Luminaires for road and street lighting
(IEC 60598-2-3:2002)
Luminaires Leuchten
Partie 2-3: Règles particulières - Teil 2-3: Besondere Anforderungen -
Luminaires d'éclairage public Leuchten für Straßen- und
(CEI 60598-2-3:2002) Wegebeleuchtung
(IEC 60598-2-3:2002)
This European Standard was approved by CENELEC on 2003-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60598-2-3:2003 E
Foreword
The text of document 34D/762/FDIS, future edition 3 of IEC 60598-2-3, prepared by SC 34D,
Luminaires, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 60598-2-3 on 2003-02-01.
This European Standard supersedes EN 60598-2-3:1994 + corrigendum May 1996 + A1:1997 +
A2:2001.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level
...
기사 제목: EN 60598-2-3: 2003 - 조명기기 - 2-3부: 특정 요구 사항 - 도로 및 거리 조명용 조명기기 기사 내용: 텅스텐 필라멘트, 튜브형 형광등 및 기타 방전등을 사용하는 도로와 거리 조명용 조명기기에 대한 요구 사항을 규정합니다. 이러한 조명기기는 공급 전압이 1,000 V를 초과하지 않아야 합니다.
記事タイトル：EN 60598-2-3:2003 - 照明器具 - 部分2-3: 特定の要件 - 道路および街路照明用照明器具 記事内容：本記事では、道路および街路照明用の照明器具についての要件を定めています。これらの照明器具は、タングステンフィラメント、筒状の蛍光灯、その他の放電灯と使用することができます。また、最大1,000Vの供給電圧で安全に使用することが保証されています。
The article discusses the EN 60598-2-3:2003 standard, which provides specific requirements for luminaires used for road and street lighting. These luminaires are designed to work with tungsten filament, tubular fluorescent, and other discharge lamps. The standard ensures that these luminaires are safe to use with supply voltages up to 1,000 V.
記事タイトル：EN 60598-2-3:2003 - 照明器具 - 第2-3部：特定の要件 - 道路および街路灯用照明器具 記事内容：本記事では、道路および街路灯用の照明器具に対する要件がEN 60598-2-3:2003で定められていることを述べています。これらの照明器具は、タングステンフィラメント、チューブ型蛍光灯、およびその他の放電灯を使用し、供給電圧が1,000 V以下である必要があります。
The article discusses the EN 60598-2-3:2003 standard, which outlines specific requirements for luminaires used in road and street lighting. These luminaires should be compatible with tungsten filament, tubular fluorescent, and other discharge lamps, and should operate at supply voltages below 1,000 V.
기사 제목: EN 60598-2-3:2003 - 조명기구 - 파트 2-3: 특수 요구 사항 - 도로 및 가로 조명용 조명기구 기사 내용: 이 기사는 도로 및 가로 조명용 조명기구에 대한 요구 사항을 규정하며, 텅스텐 필라멘트, 튜브형 형광등 및 기타 방전등과 함께 사용할 수 있습니다. 이 조명기구는 공급 전압이 1,000V를 초과하지 않는 범위에서 작동될 수 있도록 설계되었습니다.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...