Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for signals delivered at the system outlet in operation

IEC 60728-1-2:2014 provides the minimum performance requirements to be fulfilled in operation at the system outlet or terminal input and describes the summation criteria for the impairments present in the received signals and those produced by the CATV/MATV/SMATV cable network, including individual receiving systems. It is applicable to cable networks intended for television signals, sound signals and interactive services operating between about 5 MHz and 3 000 MHz. The frequency range is extended to 6 000 MHz for home distribution techniques that replace wired cords with a wireless two way communication inside a room (or a small number of adjacent rooms) that uses the 5 GHz to 6 GHz frequency band. This second edition cancels and replaces the first edition published in 2009, and constitutes a technical revision. It includes the following technical: update of performance requirements in Clause 7 to include those for DVB-T2 signals.

Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste - Teil 1-2: Leistungsanforderungen an Signale der Teilnehmeranschlussdose im realen Betrieb

Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion sonore et services interactifs - Partie 1-2: Exigences de performance relatives aux signaux délivrés à la prise terminale en fonctionnement

L'IEC 60728-1-2:2014 décrit les exigences minimales de qualité en fonctionnement des signaux à la prise d'abonné ou à la borne d'entrée du terminal et décrit les critères d'addition des dégradations, celles présentes dans les signaux reçus, et celles produites par le réseau de distribution par câbles CATV/MATV/SMATV, ceci comprenant les systèmes de réception individuels. Elle s'applique aux réseaux de distribution par câbles pour les signaux de télévision, de radiodiffusion sonore et des services interactifs fonctionnant entre environ 5 MHz et 3 000 MHz. La bande de fréquences est étendue à 6 000 MHz pour les techniques de distribution domestique où des cordons filaires sont remplacés par une communication bidirectionnelle sans fil à l'intérieur d'une pièce (ou d'un nombre restreint de pièces adjacentes) utilisant la bande de fréquences de 5 GHz à 6 GHz. Cette deuxième édition annule et remplace la première édition parue en 2009, dont elle constitue une révision technique. Elle inclut les modifications suivantes: mise à jour des exigences de qualité de l'Article 7 afin d'inclure les exigences pour les signaux DVB-T2.

Kabelska omrežja za televizijske in zvokovne signale ter interaktivne storitve - 1-2. del: Tehnične zahteve za signale na izhodu delujočega sistema (IEC 60728-1-2:2014)

Standard določa zahteve in opisuje izvedbene smernice RF-okablenja za dvosmerna domača omrežja. Ta standard se uporablja za katero koli domače omrežje, ki distribuira signale, ki jih posredujejo kabelska omrežja CATV/MATV/SMATV (vključno s posamičnimi sistemi za sprejem) s koaksialnim kabelskim izhodom. Ta standard se uporablja tudi za domača omrežja, pri katerih del razdelilnega omrežja uporablja brezžične povezave, na primer namesto sprejemnega kabla. Ta del standarda IEC 60728 se torej uporablja za radiofrekvenčne kable za dvosmerna domača omrežja z žičnimi kabli ali brezžičnimi povezavami znotraj sobe ter je namenjen predvsem za televizijske in zvokovne signale s frekvenco med približno 5 MHz in 3000 MHz. Frekvenčni razpon se poveča na 6000 MHz pri distribucijskih tehnikah, ki nadomeščajo žične kable z brezžično dvosmerno komunikacijo znotraj sobe (ali manjšega števila sosednjih sob), ki uporablja pas med 5 GHz in 6 GHz.

General Information

Status
Published
Publication Date
28-Aug-2014
Withdrawal Date
10-Apr-2017
Current Stage
6060 - Document made available - Publishing
Start Date
29-Aug-2014
Completion Date
29-Aug-2014

Relations

Buy Standard

Standard
EN 60728-1-2:2014
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2014
1DGRPHãþD
SIST EN 60728-1-2:2009
.DEHOVNDRPUHåMD]DWHOHYL]LMVNHLQ]YRNRYQHVLJQDOHWHULQWHUDNWLYQHVWRULWYH
GHO7HKQLþQH]DKWHYH]DVLJQDOHQDL]KRGXGHOXMRþHJDVLVWHPD ,(&

&DEOHQHWZRUNVIRUWHOHYLVLRQVLJQDOVVRXQGVLJQDOVDQGLQWHUDFWLYHVHUYLFHV3DUW
3HUIRUPDQFHUHTXLUHPHQWVIRUVLJQDOVGHOLYHUHGDWWKHV\VWHPRXWOHWLQ2SHUDWLRQ
,(&
.DEHOQHW]HIU)HUQVHKVLJQDOH7RQVLJQDOHXQGLQWHUDNWLYH'LHQVWH7HLO
/HLVWXQJVDQIRUGHUXQJHQDQ6LJQDOHGHU7HLOQHKPHUDQVFKOXVVGRVHLPUHDOHQ%HWULHE
,(&
5pVHDX[GHGLVWULEXWLRQSDUFkEOHVSRXUVLJQDX[GHWpOpYLVLRQVLJQDX[GHUDGLRGLIIXVLRQ
VRQRUHHWVHUYLFHVLQWHUDFWLIV3DUWLH([LJHQFHVGHSHUIRUPDQFHUHODWLYHVDX[
VLJQDX[GpOLYUpVjODSULVHWHUPLQDOHHQIRQFWLRQQHPHQW
&(,
Ta slovenski standard je istoveten z: EN 60728-1-2:2014
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60728-1-2

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2014
ICS 33.120.10; 33.160; 35.110 Supersedes EN 60728-1-2:2009
English Version
Cable networks for television signals, sound signals and
interactive services - Part 1-2: Performance requirements for
signals delivered at the system outlet in Operation
(IEC 60728-1-2:2014)
Réseaux de distribution par câbles pour signaux de Kabelnetze für Fernsehsignale, Tonsignale und interaktive
télévision, signaux de radiodiffusion sonore et services Dienste - Teil 1-2: Leistungsanforderungen an Signale der
interactifs - Partie 1-2: Exigences de performance relatives Teilnehmeranschlussdose im realen Betrieb
aux signaux délivrés à la prise terminale en fonctionnement (IEC 60728-1-2:2014)
(CEI 60728-1-2:2014)
This European Standard was approved by CENELEC on 2014-04-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60728-1-2:2014 E
Foreword
The text of document 100/2246/FDIS, future edition 2 of IEC 60728-1-2, prepared by Technical Area 5
“Cable networks for television signals, sound signals and interactive services” of IEC/TC 100 “Audio,
video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60728-1-2:2014.

The following dates are fixed:
• latest date by which the document has to be (dop) 2015-02-28
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-04-11
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60728-1-2:2009.

EN 60728 1-2:2009:
- update of performance requirements in Clause 7 to include those for DVB-T2 signals.

This standard is to be used in conjunction with EN 60728-1:2014.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60728-1-2:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 60728-10 NOTE Harmonized as EN 60728-10.

- 3 - EN 60728-1-2:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 60050-705 -  International Electrotechnical Vocabulary - -
(IEV) -
Chapter 705: Radio wave propagation
IEC 60050-712 -  International Electrotechnical Vocabulary - -
(IEV) -
Chapter 712: Antennas
IEC 60050-725 -  International Electrotechnical Vocabulary - -
(IEV) -
Chapter 725: Space radiocommunications
IEC 60728-1 2014 Cable networks for television signals, EN 60728-1 2014
sound signals and interactive services -
Part 1: System performance of forward
paths
IEC 60728-1-1 2014 Cable networks for television signals EN 60728-1-1 2014
sound signals and interactive services -
Part 1-1: RF cabling for two way home
networks
IEC 60728-3 2010 Cable networks for television signals, EN 60728-3 2011
sound signals and interactive services -
Part 3: Active wideband equipment for
cable networks
IEC 60966-2-4 -  Radio frequency and coaxial cable EN 60966-2-4 -
assemblies -
Part 2-4: Detail specification for cable
assemblies for radio and TV receivers -
Frequency range 0 MHz to 3 000 MHz,
IEC 61169-2 connectors
IEC 60966-2-5 -  Radio frequency and coaxial cable EN 60966-2-5 -
assemblies -
Part 2-5: Detail specification for cable
assemblies for radio and TV receivers -
Frequency range 0 MHz to 1 000 MHz,
IEC 61169-2 connectors
Publication Year Title EN/HD Year

IEC 60966-2-6 - Radio frequency and coaxial cable EN 60966-2-6 -
assemblies -
Part 2-6: Detail specification for cable
assemblies for radio and TV receivers -
Frequency range 0 MHz to 3 000 MHz,
IEC 61169-24 connectors
ITU-R -  Methodology for the subjective assessment - -
Recommendation of the quality of television pictures
BT.500
ITU-R -  Subjective quality of television pictures in - -
Recommendation relation to the main impairments of the
BT.654 analogue composite television signal
ITU-R -  Radio-frequency protection ratios for AM - -
Recommendation vestigial sideband terrestrial television
BT.655 systems interfered with by unwanted
analogue vision signals and their
associated sound signals
ITU-T -  Transmission performance of television - -
Recommendation circuits designed for use in international
J.61 connections
ITU-T -  Insertion of test signals in the field-blanking - -
Recommendation interval of monochrome and colour
J.63 television signals
ETSI EN 300 421 -  Digital Video Broadcasting (DVB): Framing - -
structure, channel coding and modulation
for 11/12 GHz satellite services
ETSI EN 300 429 -  Digital Video Broadcasting (DVB): Framing - -
structure, channel coding and modulation
for cable systems
ETSI EN 300 473 -  Digital Video Broadcasting (DVB): Satellite - -
Master Antenna Television (SMATV)
distribution systems
ETSI EN 300 744 -  Digital Video Broadcasting (DVB): Framing - -
structure, channel coding and modulation
for digital terrestrial television
ETSI EN 302 307 -  Digital Video Broadcasting (DVB);Second - -
generation framing structure, channel
coding and modulation systems for
Broadcasting, Interactive Services, News
Gathering and other broadband satellite
applications (DVB-S2)
ETSI EN 302 755 -  Digital Video Broadcasting (DVB); Frame - -
structure channel coding and modulation
for a second generation digital terrestrial
television broadcasting system (DVB-T2)

IEC 60728-1-2 ®
Edition 2.0 2014-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Cable networks for television signals, sound signals and interactive services –

Part 1-2: Performance requirements for signals delivered at the system outlet in

operation
Réseaux de distribution par câbles pour signaux de télévision, signaux de

radiodiffusion sonore et services interactifs –

Partie 1-2: Exigences de performance relatives aux signaux délivrés à la prise

terminale en fonctionnement
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX W
ICS 33.120.10; 33.160; 35.110 ISBN 978-2-8322-1436-7

– 2 – IEC 60728-1-2:2014 © IEC 2014
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 9
2 Normative references . 9
3 Terms, definitions, symbols and abbreviations . 10
3.1 Terms and definitions . 10
3.2 Abbreviations . 17
4 Methods of measurement . 18
5 Subjective quality of television pictures in relation to the main impairments of the
analogue composite television signal . 19
5.1 Subjective quality scale. 19
5.2 Subjective quality and objective parameters . 20
6 Summation of the impairments . 23
6.1 Impairments to be summed . 23
6.2 Summation laws . 23
6.2.1 General . 23
6.2.2 Voltage addition . 23
6.2.3 Power addition . 24
6.3 Examples . 24
7 Performance requirements in operation . 24
7.1 General . 24
7.2 Impedance . 25
7.3 Performance requirements at the terminal input . 25
7.3.1 Definition . 25
7.3.2 Signal level . 25
7.3.3 Other parameters . 25
7.4 Performance requirements at system outlets . 25
7.4.1 Minimum and maximum carrier levels . 25
7.4.2 Mutual isolation between system outlets . 26
7.4.3 Isolation between individual outlets in one household . 26
7.4.4 Isolation between forward and return path . 26
7.4.5 Long-term frequency stability of distributed carrier signals at
any system outlet. 26
7.4.6 Carrier level differences at system outlet . 26
7.4.7 Frequency response within a television channel . 26
7.4.8 Random noise at system outlet . 26
7.4.9 Interference to television channels. 29
Annex A (normative) RF ca
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.