IEC 60061-3:1969/AMD40:2009

Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

Subscribe to IEC 60061 Database to access the full and updated content of the series.

Amendement 40 - Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 3: Calibres

Subscribe to IEC 60061 Database to access the full and updated content of the series.

Merilna oprema za števce električne energije

General Information

• Status: Published
• Publication Date: 23-Jul-2009
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 17.140 - Acoustics and acoustic measurements
• ICS: 29.140.10 - Lamp caps and holders
• ICS: 91.140.50 - Electricity supply systems
• Technical Committee: SC 34B - Lamp caps and holders
• Current Stage: PPUB - Publication issued
• Completion Date: 24-Jul-2009
• Ref Project: SIST IEC/TR 60736:1995 - Testing equipment for electrical energy meters

Standards Content (Sample)

NORME CEI




INTERNATIONALE IEC






INTERNATIONAL 60061-3



STANDARD


AMENDEMENT 40


AMENDMENT 40




2009-07






Amendement 40


Culots de lampes et douilles ainsi que calibres

pour le contrôle de l'interchangeabilité

et de la sécurité –
Partie 3:
Calibres

Amendment 40
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 3:
Gauges


Les feuilles de cet amendement sont à insérer dans la
CEI 60061-3 (1969)

The sheets contained in this amendment are to be inserted

in IEC 60061-3 (1969)
© IEC 2009 Droits de reproduction réservés ⎯ Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия

---------------------- Page: 1 ----------------------
NORME CEI




INTERNATIONALE IEC






INTERNATIONAL 60061-3




STANDARD Edition 3.40



2009-07



Modifiée selon les Compléments:

Amended in accordance with Supplements:
A(1970), B(1971), C(1971), D(1972), E(1972), F(1975),

G(1977), H(1980), J(1983), K(1987), L(1989), M(1992), N(1994),

P(1994), Q(1995), R(1996), S(1996), T(1996), U(1997),

et les amendements/amendments 20(1998) 21(1999), 22(1999), 23(2000),
24(2001), 25(2001), 26(2001), 27(2002), 28(2002), 29(2002), 30 (2003), 31(2003),

32(2003), 33(2004), 34(2004), 35(2005), 36(2006) 37(2006), 38(2007)

39(2009) et/and 40(2009)


Culots de lampes et douilles ainsi que calibres


pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 3:
Calibres

Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 3:
Gauges



© IEC 2009 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photo-copie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия

---------------------- Page: 2 ----------------------
60061-3 Amend. 40 © CEI/IEC:2009 – 1 –


SOMMAIRE CONTENTS



CALIBRES – SOMMAIRE PAR DÉSIGNATION GAUGES – CONTENTS BY DESIGNATION


Feuilles Sheet

Calibre «Entre» pour culots sur lampes "Go" gauge for caps on finished

terminées BA20. 7006-2-3 lamps BA20. 7006-2-3

Calibre d'acceptation pour culots B22d destinés à Acceptance gauge for B22d caps intended for

un enfilage automatique. 7006-3-1 automatic wire threading . 7006-3-1

Calibres «Entre» pour culots à deux broches G1.27, "Go" gauges for bi-pin caps G1.27, GX1.27,
GX1.27, GY1.3, G2.54, GX2.54, GY2.5, G3.17 GY1.3, G2.54, GX2.54, GY2.5, G3.17

& GY3.2. 7006-4-1 & GY3.2. 7006-4-1

Calibres pour vérifier l'insertion des culots dans Gauges for testing the insertion of caps

les douilles B15d, B22d & BY22d . 7006-4A-2 in lampholders B15d, B22d & BY22d. 7006-4A-2

Calibres pour vérifier la tenue des culots B15d Gauges for testing the retention of B15d and
et B22d dans la douille . 7006-4B-1 B22d caps in the holder. 7006-4B-1
Calibre «Entre» pour culot préfocus PX26 . 7006-5-2 "Go" gauge for prefocus cap PX26. 7006-5-2
Calibre «Entre» et «N'Entre Pas» pour les languettes "Go" and "Not Go" gauge for the tabs of prefocus
du culot préfocus PX26. 7006-5A-1 cap PX26 . 7006-5A-1
Calibre «N'Entre Pas» pour la dimension Mmin "Not Go" gauge for dimension Mmin of prefocus
du culot préfocus PX26. 7006-5B-2 cap PX26 .
...

SLOVENSKI STANDARD
SIST IEC/TR 60736:1995
01-avgust-1995
0HULOQDRSUHPD]DãWHYFHHOHNWULþQHHQHUJLMH
Testing equipment for electrical energy meters
Equipement d'étalonnage de compteurs d'énergie électrique
Ta slovenski standard je istoveten z: IEC/TR 60736
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
SIST IEC/TR 60736:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST IEC/TR 60736:1995

---------------------- Page: 2 ----------------------

SIST IEC/TR 60736:1995
CEI
RAPPORT
IEC
TECHNIQUE
736
TECHNICAL
édition
Premipre
REPORT First edition
1982
Equipement d'étalonnage de compteurs
d'énergie électrique
Testing equipment for electrical
energy meters
all rights reserved
Droits de reproduction réservés—Copyright —
© CEI 1982
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
any form or by any means, electronic or mechanical,
utilisée sous quelque forme que ce soit et par aucun pro-
including photocopying and microfilm, without permission
cédé, électronique ou mécanique, y compris la photocopie et
in writing from the publisher.
les microfilms, sans l'accord écrit de l'éditeur.
Genève, Suisse
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé
Electrotechnique Internationale CODE PRIX
Commission
International Electrotechnical Commission
PRICE CODE Q
IEC MemuyHapoAHan 3neHrpoîexHH4ecHaA HCMHCCHA
Pour prix, voir catalogue en vigueur •
+/
For price, see current catalogue

---------------------- Page: 3 ----------------------

SIST IEC/TR 60736:1995
736 © IEC 1982 - 3 -
CONTENTS
Page
FOREWORD 5
PREFACE 5
Clause
7
1. Scope
2. Units and definitions 7
3. Accuracy 9
4. Testing procedure 13
17
5. Dielectric properties
APPENDIX A — Additional notes and guidance concerning testing equipment for electrical
energy meters 19
APPENDIX Notes concerning error definitions, basic quantities accuracy and error
B —
25
determination
APPENDIX C — Guidelines for the initial checking of a new meter testing equipment . . . . 33

---------------------- Page: 4 ----------------------

SIST IEC/TR 60736:1995
736 © I EC 1982 - 5 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
TESTING EQUIPMENT FOR ELECTRICAL ENERGY METERS
FOREWORD
I) The formal decisions or agreements of the 1 EC on technical matters, prepared by Technical Committees on which all the
National Committees having a special interest therein are represented, express, as nearly as possible, an international
consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use and they are accepted by the National Committees in that
2)
sense.
3) In order to promote international unification, the I EC expresses the wish that all National Committees should adopt the
text of the I EC recommendation for their national rules in so far as national conditions will permit. Any divergence
between the 1 EC recommendation and the corresponding national rules should, as far as possible, be clearly indicated in
the latter.
PREFACE
This report has been prepared by Sub-Committee 13A: Electric Energy Measuring Equipment, of
I EC Technical Committee No. 13: Electrical Measuring Equipment.
Drafts were discussed at the meetings held in Warsaw in 1976 and in Florence in 1978. As a result
of this meeting, a draft, Document 13A(Central Office)43, was submitted to the National
Committees for approval under the Six Months' Rule in June 1979. Amendments, Document
13A(Central Office)49, were submitted to the National Committees for approval under the Two
Months' Procedure in October 1980.
The National Committees of the following countries voted explicitly in favour of publication:
Austria Ireland
Belgium Israel
Italy
Brazil
Japan
Bulgaria
Netherlands
China
Poland
Czechoslovakia
Denmark Romania
Egypt South Africa (Republic of)
Finland Sweden
Switzerland
France
Turkey
Germany
Hungary
In view of the fact that this is the first I EC publication on meter testing equipment (MTE) and
that, in various countries, there are very different ways of constructing and using an MTE, explan-
atory notes, additional notes and guidance to which attention should be given will be found in
Appendices A, B and C.

---------------------- Page: 5 ----------------------

SIST IEC/TR 60736:1995
736 O I EC 1982 - 7 -
TESTING EQUIPMENT FOR ELECTRICAL ENERGY METERS
1. Scope
This report is applicable to three-phase and/or single-phase equipment used for type and
acceptance testing of electrical energy meters of Classes 0.5, I and 2.
2. Units and definitions
The units used in this report are those used by the International Electrotechnical
Commission (IEC).
2.1
Testing equipment for electrical energy meters; meter testing equipment (MTE)
An assembly of apparatus to supply energy to meter
...