SIST EN IEC 61851-21-2:2021
(Main)Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems
Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems
This part of IEC 61851 defines the EMC requirements for any off-board components or
equipment of such systems used to supply or charge electric vehicles with electric power by
conductive power transfer (CPT), with a rated input voltage, according to IEC 60038:2009, up
to 1 000 V AC or 1 500 V DC and an output voltage up to 1 000 V AC or 1 500 V DC.
This document covers off-board charging equipment for mode 1, mode 2, mode 3 and mode 4
charging as defined in IEC 61851-1:2017.
Cables where there is no electronics or no electric/electronic switching are considered as
passive (benign) and are deemed to comply with the emission and immunity requirements of
this document without any need for testing.
This document does not apply to any on-board components or equipment of charging or
power supply systems being part of the vehicles. The EMC requirements for such equipment
are covered by IEC 61851-21-1: 2017.
Compliance with the emission and immunity requirements of this document is verified where it
can be demonstrated that the equipment under test (EUT) meets the respective limits, during
type tests in the measuring arrangement of this document.
Requirements for electric vehicle wireless power transfer (WPT) systems are covered in
IEC 61980 (all parts).
Konduktive Ladesysteme für Elektrofahrzeuge - Teil 21-2: Anforderungen für den konduktiven Anschluss von Elektrofahrzeugen an eine Wechsel-/Gleichstromversorgung - EMV-Anforderungen an externe Ladesysteme für Elektrofahrzeuge
Système de charge par conduction pour véhicules électriques - Partie 21-2: Exigences applicables aux véhicules électriques pour connexion par conduction à une alimentation en courant alternatif ou courant continu - Exigences CEM concernant les systèmes de charge non embarqués pour véhicules électriques
IEC 61851-21-2:2018 définit les exigences CEM concernant les composants ou les équipements des systèmes de charge non embarqués qui permettent d'alimenter ou de charger les véhicules électriques par une source d'alimentation électrique par transfert d'énergie par conduction (CPT ), avec une tension d'entrée assignée, jusqu'à 1 000 V en courant alternatif ou jusqu'à 1 500 V en courant continu, conformément à l'IEC 60038:2009, et une tension de sortie jusqu'à 1 000 V en courant alternatif ou jusqu'à 1 500 V en courant continu.
Le présent document traite des équipements de charge non embarqués pour les charges en mode 1, mode 2, mode 3 et mode 4 telles que définies dans l’IEC 61851-1:2017.
Les câbles sans composants électroniques ou qui ne subissent aucune coupure électrique/électronique sont considérés comme passifs (faibles). Ils sont jugés par ailleurs conformes aux exigences d'émission et d'immunité du présent document sans qu'aucun essai ne s'avère nécessaire.
Le présent document ne s'applique à aucun composant embarqué, équipement de charge ou système d'alimentation faisant partie des véhicules. Les exigences CEM concernant ce type d’équipements sont couvertes par l'IEC 61851-21-1:2017.
La conformité aux exigences d'émission et d'immunité du présent document est vérifiée lorsqu'il peut être démontré que l’équipement en essai (EUT ) satisfait aux limites respectives, lors des essais de type effectués avec le dispositif de mesure du présent document.
Les exigences concernant les systèmes de transfert d'énergie sans fil (WPT) pour véhicules électriques sont couvertes dans l’IEC 61980 (toutes les parties).
IEC 61851-21-2:2018, avec l’IEC 61851-21-1, annule et remplace l’IEC 61851-21:2001. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'IEC 61851-21:2001:
a) le présent document ne traite que des essais de CEM plutôt que d’autres essais électriques;
b) les Articles 2 et 3 ont été mis à jour;
c) les accès, les montages d’essai et leurs limites respectives ainsi que les modes de fonctionnement sont définis de façon plus précise;
d) les Annexes A à F ont été ajoutées.
Sistemi za napajanje električnih vozil - 21-2. del: Zahteve za električna vozila za priključitev na izmenično/enosmerno napajanje - EMC zahteve za zunanje napajalne sisteme električnih vozil
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61851-21-2:2021
01-julij-2021
Nadomešča:
SIST EN 61851-21:2002
Sistemi za napajanje električnih vozil - 21-2. del: Zahteve za električna vozila za
priključitev na izmenično/enosmerno napajanje - EMC zahteve za zunanje
napajalne sisteme električnih vozil
Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for
conductive connection to an AC/DC supply - EMC requirements for off board electric
vehicle charging systems
Ta slovenski standard je istoveten z: EN IEC 61851-21-2:2021
ICS:
43.120 Električna cestna vozila Electric road vehicles
SIST EN IEC 61851-21-2:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61851-21-2:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 61851-21-2:2021
EUROPEAN STANDARD EN IEC 61851-21-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 33.100.10; 43.120 Supersedes EN 61851-21:2002 (partially)
English Version
Electric vehicle conductive charging system - Part 21-2: Electric
vehicle requirements for conductive connection to an AC/DC
supply - EMC requirements for off board electric vehicle charging
systems
(IEC 61851-21-2:2018)
Système de charge par conduction pour véhicules Konduktive Ladesysteme für Elektrofahrzeuge - Teil 21-2:
électriques - Partie 21-2: Exigences applicables aux Anforderungen für den konduktiven Anschluss von
véhicules électriques pour connexion par conduction à une Elektrofahrzeugen an eine Wechsel-
alimentation en courant alternatif ou courant continu - /Gleichstromversorgung - EMV-Anforderungen an externe
Exigences CEM concernant les systèmes de charge non Ladesysteme für Elektrofahrzeuge
embarqués pour véhicules électriques (IEC 61851-21-2:2018)
(IEC 61851-21-2:2018)
This European Standard was approved by CENELEC on 2018-05-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61851-21-2:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61851-21-2:2021
EN IEC 61851-21-2:2021 (E)
European foreword
The text of document 69/531/FDIS, future edition 1 of IEC 61851-21-2, prepared by IEC/TC 69
"Electrical power/energy transfer systems for electrically propelled road vehicles and industrial trucks"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 61851-21-2:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-10-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-04-30
document have to be withdrawn
This document (partially) supersedes EN 61851-21:2002 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61851-21-2:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61851-21-1 NOTE Harmonized as EN 61851-21-1
IEC 61980 (series) NOTE Harmonized as EN IEC 61980 (series)
CISPR 11:2015 NOTE Harmonized as EN 55011:2016
CISPR 16-2-1:2014 NOTE Harmonized as EN 55016-2-1:2014 (not modified)
ISO 15118-3:2015 NOTE Harmonized as EN ISO 15118-3:2016 (not modified)
2
---------------------- Page: 4 ----------------------
SIST EN IEC 61851-21-2:2021
EN IEC 61851-21-2:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60038 (mod) 2009 IEC standard voltages EN 60038 2011
IEC 61000-3-2 2014 Electromagnetic compatibility (EMC) - Part EN 61000-3-2 2014
3-2: Limits - Limits for harmonic current
emissions (equipment input current ≤ 16 A
per phase)
IEC 61000-3-3 2013 Electromagnetic compatibility (EMC) - Part EN 61000-3-3 2013
3-3: Limits - Limitation of voltage changes,
voltage fluctuations and flicker in public
low-voltage supply systems, for equipment
with rated current ≤16 A per phase and not
subject to conditional connection
IEC 61000-3-11 2017 Electromagnetic compatibility (EMC) - Part EN IEC 61000-3-2019
3-11 - Limits - Limitation of voltage 11
changes, voltage fluctuations and flicker in
public low-voltage supply systems -
Equipment with rated current ≤ 75 A and
subject to conditional connection
IEC 61000-3-12 2011 Electromagnetic compatibility (EMC) - Part EN 61000-3-12 2011
3-12: Limits - Limits for harmonic currents
produced by equipment connected to
public low-voltage systems with input
current >16 A and ≤ 75 A per phase
IEC 61000-4-2 2008 Electromagnetic compatibility (EMC) - Part EN 61000-4-2 2009
4-2: Testing and measurement techniques
- Electrostatic discharge immunity test
IEC 61000-4-3 2006 Electromagnetic compatibility (EMC) - Part EN 61000-4-3 2006
4-3 : Testing and measurement techniques
- Radiated, radio-frequency,
electromagnetic field immunity test
+ A1 2007 + A1 2008
+ A2 2010 + A2 2010
3
---------------------- Page: 5 ----------------------
SIST EN IEC 61851-21-2:2021
EN IEC 61851-21-2:2021 (E)
Publication Year Title EN/HD Year
IEC 61000-4-4 2012 Electromagnetic compatibility (EMC) - Part EN 61000-4-4 2012
4-4: Testing and measurement techniques
- Electrical fast transient/burst immunity
test
IEC 61000-4-5 2014 Electromagnetic compatibility (EMC) - Part EN 61000-4-5 2014
4-5: Testing and measurement techniques
- Surge immunity test
+ A1 2017 + A1 2017
IEC 61000-4-6 2013 Electromagnetic compatibility (EMC) - Part EN 61000-4-6 2014
4-6: Testing and measurement techniques
- Immunity to conducted disturbances,
induced by radio-frequency fields
IEC 61000-4-8 2009 Electromagnetic compatibility (EMC) - Part EN 61000-4-8 2010
4-8: Testing and measurement techniques
- Power frequency magnetic field immunity
test
IEC 61000-4-11 2004 Electromagnetic compatibility (EMC) - Part EN 61000-4-11 2004
4-11: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests
+ A1 2017 + A1 2017
IEC 61000-4-34 2005 Electromagnetic compatibility (EMC) - Part EN 61000-4-34 2007
4-34: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests for equipment with input
current more than 16 A per phase
+ A1 2009 + A1 2009
IEC 61000-6-1 2016 Electromagnetic compatibility (EMC) - Part EN IEC 61000-6-1 2019
6-1: Generic standards - Immunity
standard for residential, commercial and
light-industrial environments
IEC 61000-6-2 2016 Electromagnetic compatibility (EMC) - Part EN IEC 61000-6-2 2019
6-2: Generic standards - Immunity
standard for industrial environments
IEC 61000-6-3 2006 Electromagnetic compatibility (EMC) - Part EN 61000-6-3 2007
6-3: Generic standards - Emission
standard for residential, commercial and
light-industrial environments
+ A1 2010 + A1 2011
- - + AC 2012
IEC 61000-6-4 2006 Electromagnetic compatibility (EMC) -- Part EN 61000-6-4 2007
6-4: Generic standards - Emission
standard for industrial environments
+ A1 2010 + A1 2011
IEC 61851-1 2017 Electric vehicle conductive charging EN IEC 61851-1 2019
system - Part 1: General requirements
4
---------------------- Page: 6 ----------------------
SIST EN IEC 61851-21-2:2021
EN IEC 61851-21-2:2021 (E)
Publication Year Title EN/HD Year
IEC 61851-23 2014 Electric vehicle conductive charging EN 61851-23 2014
system - Part 23: DC electric vehicle
charging station
IEC 62053-21 2003 Electricity metering equipment (a.c.) - EN 62053-21 2003
Particular requirements - Part 21: Static
meters for active energy (classes 1 and 2)
CISPR 16-1-2 2014 Specification for radio disturbance and EN 55016-1-2 2014
immunity measuring apparatus and
methods - Part 1-2: Radio disturbance and
immunity measuring apparatus - Coupling
devices for conducted disturbance
measurements
CISPR 16-1-4 2010 Specification for radio disturbance and EN 55016-1-4 2010
immunity measuring apparatus and
methods - Part 1-4: Radio disturbance and
immunity measuring apparatus - Antennas
and test sites for radiated disturbance
measurements
+ A1 2012 + A1 2012
+ A2 2017 + A2 2017
CISPR 25 2008 Vehicles, boats and internal combustion - -
engines - Radio disturbance characteristics
- Limits and methods of measurement for
the protection of on-board receivers
CISPR 32 2015 Electromagnetic compatibility of multimedia EN 55032 2015
equipment - Emission requirements
- - + A11 2020
MIL-STD-461F 2007 Department of Defense interface standard
requirements for the control of
electromagnetic interference
characteristics of subsystems and
equipment
5
---------------------- Page: 7 ----------------------
SIST EN IEC 61851-21-2:2021
---------------------- Page: 8 ----------------------
SIST EN IEC 61851-21-2:2021
IEC 61851-21-2
®
Edition 1.0 2018-04
INTERNATIONAL
STANDARD
Electric vehicle conductive charging system –
Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC
supply – EMC requirements for off-board electric vehicle charging systems
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.100.10; 43.120 ISBN 978-2-8322-5123-2
Warning! Make sure that you obtained this publication from an authorized distributor.
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 9 ----------------------
SIST EN IEC 61851-21-2:2021
– 2 – IEC 61851-21-2:2018 © IEC 2018
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 9
4 Test plan . 11
4.1 General . 11
4.2 Configuration of EUT . 11
4.3 Termination of the EUT during testing . 12
4.4 Operating and test conditions . 12
4.4.1 General . 12
4.4.2 Immunity . 12
4.4.3 Emissions . 12
4.4.4 Environmental conditions/limitations . 13
5 Immunity requirements . 13
5.1 General . 13
5.2 Performance criteria . 22
5.2.1 General . 22
5.2.2 Performance criteria A . 22
5.2.3 Performance criteria B . 22
5.2.4 Performance criteria C . 22
6 Emission requirements . 23
6.1 General . 23
6.2 Limits and test conditions for disturbances in the low frequency (LF) range . 23
6.2.1 Overview . 23
6.2.2 Harmonic currents . 23
6.2.3 Voltage fluctuations and flicker . 23
6.3 Limits and test conditions for disturbances in the radio frequency (RF) range . 23
6.3.1 Overview . 23
6.3.2 Power input port (150 kHz to 30 MHz) . 24
6.3.3 CPT port (150 kHz to 30 MHz) . 26
6.3.4 Wired network port or signal/control port (150 kHz to 30 MHz) . 27
6.3.5 Enclosure port (above 30 MHz) . 29
7 Test results and test report . 31
Annex A (normative) Example test setups . 32
Annex B (informative) Radiated disturbance test for keyless entry . 35
B.1 General . 35
B.2 Test setup . 35
B.3 Test method . 35
B.4 Limits for radiated disturbances keyless entry (2 kHz to 185 kHz) . 36
Annex C (normative) Termination of ports . 37
C.1 General . 37
C.2 Termination of communication lines – Impedance stabilization networks
(ISN) . 37
C.2.1 General . 37
---------------------- Page: 10 ----------------------
SIST EN IEC 61851-21-2:2021
IEC 61851-21-2:2018 © IEC 2018 – 3 –
C.2.2 Symmetric communication lines (e.g. CAN) . 37
C.2.3 Coupling devices for PLC on power lines . 39
C.2.4 PLC (technology) on control pilot . 40
C.3 Coupling and termination devices for other communication and signalling
lines . 41
Annex D (normative) Voltage transient disturbances from DC charging equipment . 42
Annex E (normative) Voltage surge test setup for DC charging EUT . 44
Annex F (informative) Transient immunity test for DC charging EUT . 46
Bibliography . 47
Figure 1 – Examples of ports of off- board charging equipment . 10
Figure A.1 – Example test setup for floor standing equipment for radiated and
conducted emission and immunity . 33
Figure A.2 – Example test setup for table top and wall mounted equipment for emission
and immunity . 34
Figure B.1 – Example of a test setup for measurement of radiated disturbances to
keyless entry (layout and spacing for the loop sensor) . 36
Figure C.1 – Example of an impedance stabilization network for symmetric
communication lines . 38
Figure C.2 – Example of a circuit for emission tests of PLC on AC or DC power lines . 39
Figure C.3 – Example of a circuit for immunity tests of PLC on AC or DC power lines . 39
Figure C.4 – Example of a circuit for emission tests of PLC on control pilot line . 40
Figure C.5 – Example of a circuit for immunity tests of PLC on control pilot line . 41
Figure C.6 – Example of a termination circuit for testing of system A . 41
Figure D.1 – Voltage transient of DC charging EUT . 42
Figure D.2 – Voltage transient measurement equipment . 43
Figure E.1 – Example of transient test setup . 45
Table 1 – AC charging immunity requirements – Environments other than residential . 14
Table 2 – AC charging immunity requirements – Residential environments . 16
Table 3 – DC charging immunity requirements – Environments other than residential . 18
Table 4 – DC charging immunity requirements – Residential environments . 20
Table 5 – References for evaluation of low frequency (LF) phenomena . 23
Table 6 – References for evaluation of disturbances appearing in the radio frequency
(RF) range . 24
Table 7 – Disturbance voltage limits for class A equipment for AC power input port . 25
Table 8 – Disturbance voltage limits for class B equipment for AC power input port . 25
Table 9 – Disturbance voltage limits for DC power input port . 26
Table 10 – Disturbance voltage limits for class A equipment for AC CPT port . 26
Table 11 – Disturbance voltage limits for class B equipment for AC CPT port . 26
Table 12 – Disturbance voltage limits for DC CPT port . 27
Table 13 – Requirements for asymmetric mode conducted emissions from Class A
equipment . 28
Table 14 – Requirements for asymmetric mode conducted emissions from Class B
equipment . 29
Table 15 – Required highest frequency for radiated measurement . 29
---------------------- Page: 11 ----------------------
SIST EN IEC 61851-21-2:2021
– 4 – IEC 61851-21-2:2018 © IEC 2018
Table 16 – Requirements for radiated emissions at frequencies up to 1 GHz for Class
A equipment . 30
Table 17 – Requirements for radiated emissions at frequencies above 1 GHz for Class
A equipment . 30
Table 18 – Requirements for radiated emissions at frequencies up to 1 GHz for Class
B equipment . 31
Table 19 – Requirements for radiated emissions at frequencies above 1 GHz for Class
B equipment . 31
Table B.1 – Limit values of radiated disturbances (2 kHz to 185 kHz) . 36
Table C.1 – Termination of ports . 37
Table D.1 – Voltage transient limit of EUT . 42
Table E.1 – Maximum voltage to be measured on the CPT . 44
---------------------- Page: 12 ----------------------
SIST EN IEC 61851-21-2:2021
IEC 61851-21-2:2018 © IEC 2018 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM –
Part 21-2: Electric vehicle requirements for conductive connection to
an AC/DC supply – EMC requirements for off-board electric
vehicle charging systems
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61851-21-2 has been prepared by IEC technical committee 69:
Electric road vehicles and electric industrial trucks.
This first edition, together with IEC 61851-21-1, cancels and replaces IEC 61851-21:2001. It
constitutes a technical revision.
This edition includes the following significant technical changes with respect to
IEC 61851-21:2001:
a) this document addresses now only EMC related tests instead of other electrical tests;
b) Clauses 2 and 3 have been updated;
c) the port definition, the test-setups and their corresponding limits as well as the operation
modes are defined more precisely;
---------------------- Page: 13 ----------------------
SIST EN IEC 61851-21-2:2021
– 6 – IEC 61851-21-2:2018 © IEC 2018
d) Annexes A to F have been added.
The text of this International Standard is based on the following documents:
FDIS Report on voting
69/531/FDIS 69/545/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61851 series, published under the general title Electric vehicle
conductive charging system, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
---------------------- Page: 14 ----------------------
SIST EN IEC 61851-21-2:2021
IEC 61851-21-2:2018 © IEC 2018 – 7 –
ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM –
Part 21-2: Electric vehicle requirements for conductive connection to
an AC/DC supply – EMC requirements for off-board electric
vehicle charging systems
1 Scope
This part of IEC 61851 defines the EMC requirements for any off-board components or
equipment of such systems used to supply or charge electric vehicles with electric power by
conductive power transfer (CPT), with a rated input voltage, according to IEC 60038:2009, up
to 1 000 V AC or 1 500 V DC and an output voltage up to 1 000 V AC or 1 500 V DC.
This document covers off-board charging equipment for mode 1, mode 2, mode 3 and mode 4
charging as defined in IEC 61851-1:2017.
Cables
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.