SIST EN 374-1:2003
(Main)Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements
Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements
This standard specifies the requirements for gloves to protect the user against chemicals and/or micro-organisms and defines terms to be used.
This standard should be used in conjunction with EN 420.
This standard does not specify requirements for protection against any mechanical hazards.
Schutzhandschuhe gegen Chemikalien und Mikroorganismen - Teil 1: Terminologie und Leistungsanforderungen
Diese Europäische Norm legt Anforderungen an Handschuhe fest, die den Anwender gegen Chemikalien und/oder Mikroorganismen schützen, und definiert die anzuwendenden Begriffe.
Diese Europäische Norm gilt in Verbindung mit EN 420.
Diese Europäische Norm legt keine Anforderungen gegen jegliche Gefährdungen durch mechanische Beanspruchung fest.
Gants de protection contre les produits chimiques et les micro-organismes - Partie 1: Terminologie et exigences de performance
La présente Norme européenne spécifie les exigences de performance requises pour les gants destinés a la protection des utilisateurs contre les produits chimiques et/ou les micro-organismes et définit les termes a utiliser.
Cette Norme européenne doit etre utilisée en association avec l'EN 420.
Cette Norme européenne ne spécifie pas les exigences pour la protection contre les risques mécaniques.
Varovalne rokavice za zaščito pred kemikalijami in mikroorganizmi - 1. del: Izrazje in zahteve za izdelavo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzhandschuhe gegen Chemikalien und Mikroorganismen - Teil 1: Terminologie und LeistungsanforderungenGants de protection contre les produits chimiques et les micro-organismes - Partie 1: Terminologie et exigences de performanceProtective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements13.340.40Varovanje dlani in rokHand and arm protection01.040.13Varstvo okolja in zdravja. Varnost (Slovarji)Environment and health protection. Safety (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 374-1:2003SIST EN 374-1:2003en01-december-2003SIST EN 374-1:2003SLOVENSKI
STANDARDSIST EN 374-1:19961DGRPHãþD
SIST EN 374-1:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 374-1September 2003ICS 01.040.13; 13.340.40Supersedes EN 374-1:1994English versionProtective gloves against chemicals and micro-organisms - Part1: Terminology and performance requirementsGants de protection contre les produits chimiques et lesmicro-organismes - Partie 1: Terminologie et exigences deperformanceSchutzhandschuhe gegen Chemikalien undMikroorganismen - Teil 1: Terminologie undLeistungsanforderungenThis European Standard was approved by CEN on 24 July 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 374-1:2003 ESIST EN 374-1:2003
EN 374-1:2003 (E)2ContentsForeword.31Scope.42Normative references.43Terms and definitions.44Method of testing.55Performance requirements.56Marking.67Information supplied by the manufacturer.7Annex A (normative)
List of test chemicals.8Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.9SIST EN 374-1:2003
EN 374-1:2003 (E)3ForewordThis document EN 374-1:2003 has been prepared by Technical Committee CEN /TC 162, "Protective clothingincluding hand and arm protection and lifejackets", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by March 2004, and conflicting national standards shall be withdrawn at the latest byMarch 2004.This document supersedes EN 374-1:1994.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.Annex A is normative.EN 374 consists of the following Parts under the general title, Protective gloves against chemicals and micro-organisms:– Part 1: Terminology and performance requirements.– Part 2: Determination of resistance to penetration.– Part 3: Determination of resistance to permeation by chemicals.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 374-1:2003
EN 374-1:2003 (E)41 ScopeThis standard specifies the requirements for gloves to protect the user against chemicals and/or micro-organismsand defines terms to be used.This standard should be used in conjunction with EN 420.This standard does not specify requirements for protection against any mechanical hazards.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references, the latest edition of thepublication referred to applies (including amendments).EN 374-2, Protective gloves against chemicals and micro-organisms — Part 2: Determination of resistance topenetration.EN 374-3, Protective gloves against chemicals and micro-organisms — Part 3: Determination of resistance topermeation by chemicals.EN 388, Protective gloves against mechanical risks.EN 420, General requirements for gloves.3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply.3.1protective glove materialany material or combination of materials used in a glove for the purpose of isolating the hands or hands and armsfrom direct contact with a chemical and/or micro-organ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.