Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2019)

This document specifies the requirements for product quality and product testing of enamelled valves
and pressure pipe fittings for untreated and potable water supply.
It does not apply to chemical service glass-enamel and apparatus enamel.

Emails und Emaillierungen - Innen- und außenemaillierte Armaturen und Druckrohrformstücke für die Roh- und Trinkwasserversorgung - Qualitätsanforderungen und Prüfung (ISO 11177:2019)

Dieses Dokument legt die Anforderungen an die Produktqualität sowie die Produktprüfung von emaillierten Armaturen und Druckrohrformstücken in der Roh  und Trinkwasserversorgung fest.
Es gilt nicht für Chemie  und Apparateemails.

Émaux vitrifiés - Robinetterie et raccords de tuyauterie pour conduites forcées émaillés à l’intérieur et à l’extérieur destinés à l’alimentation en eau non traitée et en eau potable - Exigences de qualité et essais (ISO 11177:2018)

Le présent document spécifie les exigences quant à la qualité et aux essais des produits de robinetterie et raccords de tuyauterie pour conduites forcées émaillés destinés à l'alimentation en eau non traitée et en eau potable.
Il ne s'applique pas aux émaux vitrifiés et émaux d'appareillage destinés à une utilisation chimique.

Steklasti in porcelanski emajli - Znotraj in zunaj emajlirani ventili in tlačni cevni fitingi za nepitno in pitno vodo - Zahteve za kakovost in preskušanje (ISO 11177:2019)

Ta dokument določa zahteve za kakovost in preskušanje izdelka za emajlirane ventile ter tlačne cevne fitinge za nepitno in pitno vodo.
Ne uporablja se za kemično obdelavo steklastih emajlov in emajliranih aparatov.

General Information

Status
Published
Public Enquiry End Date
19-Mar-2018
Publication Date
04-Jun-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
25-Apr-2019
Due Date
30-Jun-2019
Completion Date
05-Jun-2019

RELATIONS

Buy Standard

Standard
SIST EN ISO 11177:2019
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 11177:2019
01-julij-2019
Nadomešča:
SIST EN ISO 11177:2016

Steklasti in porcelanski emajli - Znotraj in zunaj emajlirani ventili in tlačni cevni

fitingi za nepitno in pitno vodo - Zahteve za kakovost in preskušanje (ISO
11177:2019)

Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe

fittings for untreated and potable water supply - Quality requirements and testing (ISO

11177:2019)
Emails und Emaillierungen - Innen- und außenemaillierte Armaturen und

Druckrohrformstücke für die Roh- und Trinkwasserversorgung - Qualitätsanforderungen

und Prüfung (ISO 11177:2019)

Émaux vitrifiés - Robinetterie et raccords de tuyauterie pour conduites forcées émaillés à

l’intérieur et à l’extérieur destinés à l’alimentation en eau non traitée et en eau potable -

Exigences de qualité et essais (ISO 11177:2018)
Ta slovenski standard je istoveten z: EN ISO 11177:2019
ICS:
23.040.01 Deli cevovodov in cevovodi Pipeline components and
na splošno pipelines in general
25.220.50 Emajlne prevleke Enamels
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 11177:2019 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11177:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 11177:2019
EN ISO 11177
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 25.220.50; 91.140.60 Supersedes EN ISO 11177:2016
English Version
Vitreous and porcelain enamels - Inside and outside
enamelled valves and pressure pipe fittings for untreated
and potable water supply - Quality requirements and
testing (ISO 11177:2019)

Émaux vitrifiés - Robinetterie et raccords de tuyauterie Emails und Emaillierungen - Innen- und

pour conduites forcées émaillés à l'intérieur et à außenemaillierte Armaturen und

l'extérieur destinés à l'alimentation en eau non traitée Druckrohrformstücke für die Roh- und

et en eau potable - Exigences de qualité et essais (ISO Trinkwasserversorgung - Qualitätsanforderungen und

11177:2018) Prüfung (ISO 11177:2019)
This European Standard was approved by CEN on 21 March 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11177:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11177:2019
EN ISO 11177:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 11177:2019
EN ISO 11177:2019 (E)
European foreword

This document (EN ISO 11177:2019) has been prepared by Technical Committee ISO/TC 107 "Metallic

and other inorganic coatings" in collaboration with Technical Committee CEN/TC 262 “Metallic and

other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys”

the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall

be withdrawn at the latest by October 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 11177:2016.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
Endorsement notice

The text of ISO 11177:2019 has been approved by CEN as EN ISO 11177:2019 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 11177:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 11177:2019
INTERNATIONAL ISO
STANDARD 11177
Second edition
2019-03
Vitreous and porcelain enamels —
Inside and outside enamelled
valves and pressure pipe fittings for
untreated and potable water supply —
Quality requirements and testing
Émaux vitrifiés — Robinetterie et raccords de tuyauterie pour
conduites forcées émaillés à l’intérieur et à l’extérieur destinés à
l’alimentation en eau non traitée et en eau potable — Exigences de
qualité et essais
Reference number
ISO 11177:2019(E)
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 11177:2019
ISO 11177:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11177:2019
ISO 11177:2019(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Sampling ........................................................................................................................................................................................................................ 2

5 Quality requirements and testing procedures ...................................................................................................................... 2

5.1 Enamelling surface quality ........................................................................................................................................................... 2

5.2 Coat thickness .......................................................................................................................................................................................... 2

5.3 Hardness ....................................................................................................................................................................................................... 2

5.4 Resistance to thermal shock ........................................................................................................................................................ 2

5.5 Corrosion resistance to water and steam ........................................................................................................................ 3

5.6 Corrosion resistance to citric acid .......................................................................................................................................... 3

5.7 Corrosion and chemical resistance to acid soil ........................................................................................................... 3

5.8 Corrosion and chemical resistance to sub-surface migration of enamel after impact test ... 3

5.9 Corrosion resistance after scratch damage .................................................................................................................... 4

5.10 Corrosion resistance after abrasion damage ................................................................................................................ 4

5.11 Resistance to climatic exposure and ultraviolet radiation ................................................................................ 4

5.12 Physiological harmlessness ......................................................................................................................................................... 4

6 Test report ................................................................................................................................................................................................................... 5

© ISO 2019 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 11177:2019
ISO 11177:2019(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights ide
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.