SIST EN ISO 7225:2007/A1:2012
(Amendment)Gas cylinders - Precautionary labels (ISO 7225:2005/Amd 1:2012)
Gas cylinders - Precautionary labels (ISO 7225:2005/Amd 1:2012)
This International Standard specifies the design, content (i.e. hazard symbols and text) and application of precautionary labels intended for use on individual gas cylinders containing single gases or gas mixtures. Labels for cylinders of bundles and labels for bundles are not covered by this International Standard.
Gasflaschen - Gefahrgutaufkleber (ISO 7225:2005/Amd 1:2012)
Bouteilles à gaz - Étiquettes informatives (ISO 7225:2005/Amd 1:2012)
Plinske jeklenke - Nalepke o nevarnosti - Dopolnilo A1 (ISO 7225:2005/Amd 1:2012)
Ta mednarodni standard določa obliko, vsebine (tj. simboli za nevarnost in besedilo) ter uporabo nalepk o nevarnosti, ki so namenjene za uporabo na posameznih plinskih jeklenkah z enim plinom ali mešanico plinov. Nalepke za snope jeklenk in nalepke za snope niso obravnavane v tem mednarodnem standardu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 7225:2007/A1:2012
01-december-2012
Plinske jeklenke - Nalepke o nevarnosti - Dopolnilo A1 (ISO 7225:2005/Amd 1:2012)
Gas cylinders - Precautionary labels (ISO 7225:2005/Amd 1:2012)
Gasflaschen - Gefahrgutaufkleber (ISO 7225:2005/Amd 1:2012)
Bouteilles à gaz - Étiquettes informatives (ISO 7225:2005/Amd 1:2012)
Ta slovenski standard je istoveten z: EN ISO 7225:2007/A1:2012
ICS:
13.300 Varstvo pred nevarnimi Protection against dangerous
izdelki goods
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN ISO 7225:2007/A1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7225:2007/A1:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 7225:2007/A1:2012
EUROPEAN STANDARD
EN ISO 7225:2007/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2012
ICS 23.020.30
English Version
Gas cylinders - Precautionary labels (ISO 7225:2005/Amd
1:2012)
Bouteilles à gaz - Étiquettes informatives (ISO Gasflaschen - Gefahrgutaufkleber (ISO 7225:2005/Amd
7225:2005/Amd 1:2012) 1:2012)
This amendment A1 modifies the European Standard EN ISO 7225:2007; it was approved by CEN on 31 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7225:2007/A1:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7225:2007/A1:2012
EN ISO 7225:2007/A1:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 7225:2007/A1:2012
EN ISO 7225:2007/A1:2012 (E)
Foreword
This document (EN ISO 7225:2007/A1:2012) has been prepared by Technical Committee ISO/TC 58 "Gas
cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat
of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2013, and conflicting national standards shall be withdrawn at
the latest by March 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European
...
SLOVENSKI STANDARD
SIST EN ISO 7225:2007/oprA1:2011
01-marec-2011
Plinske jeklenke - Nalepke o nevarnosti - Dopolnilo A1 (ISO 7225:2005/DAM 1:2010)
Gas cylinders - Precautionary labels (ISO 7225:2005/DAM 1:2010)
Gasflaschen - Gefahrgutaufkleber (ISO 7225:2005/DAM 1:2010)
Bouteilles à gaz - Étiquettes informatives (ISO 7225:2005/DAM 1:2010)
Ta slovenski standard je istoveten z: EN ISO 7225:2007/prA1
ICS:
13.300 Varstvo pred nevarnimi Protection against dangerous
izdelki goods
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN ISO 7225:2007/oprA1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7225:2007/oprA1:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 7225:2007/oprA1:2011
EUROPEAN STANDARD
DRAFT
EN ISO 7225:2007
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2010
ICS 23.020.30
English Version
Gas cylinders - Precautionary labels (ISO 7225:2005/DAM
1:2010)
Bouteilles à gaz - Étiquettes informatives (ISO Gasflaschen - Gefahrgutaufkleber (ISO 7225:2005/DAM
7225:2005/DAM 1:2010) 1:2010)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 23.
This draft amendment A1, if approved, will modify the European Standard EN ISO 7225:2007. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7225:2007/prA1:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7225:2007/oprA1:2011
EN ISO 7225:2007/prA1:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 7225:2007/oprA1:2011
EN ISO 7225:2007/prA1:2010 (E)
Foreword
This document (EN ISO 7225:2007/prA1:2010) has been prepared by Technical Committee ISO/TC 58 "Gas
cylinders" in collaboration with Technical Committee CEN/TC 23 “Plain bearings” the secretariat of which is
held by BSI.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO 7225:2005/DAM 1:2010 has been approved by CEN as EN ISO 7225:2007/prA1:2010 without
any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 7225:2007/oprA1:2011
---------------------- Page: 6 ----------------------
SIST EN ISO 7225:2007/oprA1:2011
DRAFT AMENDMENT ISO 7225:2005/DAmd 1
ISO/TC 58/SC 4 Secretariat: ANSI
Voting begins on: Voting terminates on:
2010-11-04 2011-04-04
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Gas cylinders — Precautionary labels
AMENDMENT 1
Bouteilles à gaz — Étiquettes informatives
AMENDEMENT 1
ICS 23.020.30
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.