SIST EN ISO 7225:2007
(Main)Gas cylinders - Precautionary labels (ISO 7225:2005)
Gas cylinders - Precautionary labels (ISO 7225:2005)
This International Standard specifies the design, content (i.e. hazard symbols and text) and application of precautionary labels intended for use on individual gas cylinders containing single gases or gas mixtures. Labels for cylinders of bundles and labels for bundles are not covered by this International Standard.
Ortsbewegliche Gasflaschen - Gasflaschen-Kennzeichnung (ISO 7225:2005)
Diese Internationale Norm legt die Gestaltung, den Inhalt (d. h. Gefahrensymbole und Text) und die Anbringung von Gefahrzetteln, die für Einzelgasflaschen vorgesehen sind, die Gase oder Gasgemische enthalten, fest. Diese Internationale Norm gilt nicht für Gefahrzettel von in Bündeln zusammengefassten Gasflaschen sowie für Gefahrzettel von Bündeln.
Bouteilles a gaz - Étiquettes de risque (ISO 7225:2005)
L'ISO 7225:2005 établit la conception, le contenu (c'est-à-dire les symboles de danger et le texte) et l'exploitation des étiquettes informatives destinées à être apposées sur toutes les bouteilles à gaz contenant un gaz pur ou un mélange de gaz. Les étiquettes pour bouteilles à gaz sur cadre et les étiquettes destinées à être apposées sur les cadres en question ne relèvent pas de l'ISO 7225:2005.
Plinske jeklenke - Nalepke o nevarnosti (ISO 7225:2005)
Ta mednarodni standard določa obliko, vsebine (tj. simboli za nevarnost in besedilo) ter uporabo nalepk o nevarnosti, ki so namenjene za uporabo na posameznih plinskih jeklenkah z enim plinom ali mešanico plinov. Nalepke za snope jeklenk in nalepke za snope niso obravnavane v tem mednarodnem standardu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 7225:2007
01-september-2007
1DGRPHãþD
SIST EN 1089-2:2003
SIST ISO 7225:1996
Plinske jeklenke - Nalepke o nevarnosti (ISO 7225:2005)
Gas cylinders - Precautionary labels (ISO 7225:2005)
Ortsbewegliche Gasflaschen - Gasflaschen-Kennzeichnung (ISO 7225:2005)
Bouteilles a gaz - Étiquettes de risque (ISO 7225:2005)
Ta slovenski standard je istoveten z: EN ISO 7225:2007
ICS:
13.300 Varstvo pred nevarnimi Protection against dangerous
izdelki goods
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN ISO 7225:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7225:2007
---------------------- Page: 2 ----------------------
SIST EN ISO 7225:2007
EUROPEAN STANDARD
EN ISO 7225
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2007
ICS 23.020.30 Supersedes EN 1089-2:2002
English Version
Gas cylinders - Precautionary labels (ISO 7225:2005)
Bouteilles à gaz - Étiquettes de risque (ISO 7225:2005) Ortsbewegliche Gasflaschen - Gasflaschen-Kennzeichnung
(ISO 7225:2005)
This European Standard was approved by CEN on 10 May 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7225:2007: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7225:2007
EN ISO 7225:2007 (E)
Foreword
The text of ISO 7225:2005 has been prepared by Technical Committee ISO/TC 58 "Gas cylinders” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 7225:2007 by
Technical Committee CEN/TC 23 "Transportable gas cylinders", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2007, and conflicting national standards shall be withdrawn
at the latest by November 2007.
This document supersedes EN 1089-2:2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 7225:2005 has been approved by CEN as EN ISO 7225:2007 without any modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 7225:2007
INTERNATIONAL ISO
STANDARD 7225
Second edition
2005-07-15
Gas cylinders — Precautionary labels
Bouteilles à gaz — Étiquettes de risque
Reference number
ISO 7225:2005(E)
©
ISO 2005
---------------------- Page: 5 ----------------------
SIST EN ISO 7225:2007
ISO 7225:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 7225:2007
ISO 7225:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7225 was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 4, Operational
requirements for gas cylinders.
This second edition cancels and replaces the first edition (ISO 7225:1994), which has been technically revised.
© ISO 2005 – All rights reserved iii
---------------------- Page: 7 ----------------------
SIST EN ISO 7225:2007
ISO 7225:2005(E)
Introduction
This International Standard belongs to a series of standards specifying gas cylinder identification
requirements:
ISO 13769, Gas cylinders — Stamp marking
ISO 7225, Gas cylinders — Precautionary labels
ISO 32, Gas cylinders for medical use — Marking for identification of content
The purpose of using precautionary labels on gas cylinders is to facilitate the identification of each cylinder
and its content and to warn of the principal hazards associated with the said contents. Such labels can also
serve to give other essential information such as the names and chemical formula of the gas or gas mixture
and supplementary instructions on precautionary measures.
iv © ISO 2005 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 7225:2007
INTERNATIONAL STANDARD ISO 7225:2005(E)
Gas cylinders — Precautionary labels
1 Scope
This International Standard specifies the design, content (i.e. hazard symbols and text) and application of
precautionary labels intended for use on individual gas cylinders containing single gases or gas mixtures.
Labels for cylinders of bundles and labels for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.