SIST EN 24231:2000

Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 2431:1987)

This secind edition cancels and replaces the first edition (ISO 4231:1977). Is a supplement to ISO 2568 and ISO 4230 and lys down the diemensions of these screwing dies intended for production of parallel pipe threads in accordance with ISO 228-1. Diameter, thickness and fixing dimensions are accordance with ISO 2568 so as to permit the driving of and-oprated dies with the aid of the die stocks defined in that document.

Runde Hand- und Maschinen-Schneideisen für zylindrisches Rohrgewinde - Reihe G (ISO 2431:1987)

Filieres rondes de filetage, a main et a machine, pour filetages cylindriques de tuyauterie - Série G (ISO 2431:1987)

La présente Norme internationale complète l'IS0 2568 et l'IS0 4230 en fixant les dimensions des filières rondes de filetage, à main et à machine, destinées à l'exécution des filetages cylindriques de tuyauterie, série G, conformes à l'IS0 228-1. Les dimensions générales de ces filières (diamètre-épaisseur et dimensions de fixation) sont en concordance avec l'IS0 2568, de façon à permettre la manoeuvre des filières à main à l'aide des porte-filières définis dans celle-ci.

Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 2431:1987)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2000
• Withdrawal Date: 07-Dec-2016
• ICS: 25.100.50 - Taps and threading dies
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 08-Dec-2016
• Due Date: 31-Dec-2016
• Completion Date: 08-Dec-2016
• Ref Project: EN 24231:1989 - Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 2431:1987)

Relations

• Replaced By: SIST EN ISO 4231:2017 - Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016))
• Effective Date: 07-Dec-2016
• Corrected By: SIST EN 24231:2000/AC1:2001 - Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:1987)
• Effective Date: 22-Dec-2008
• Replaced By: SIST EN ISO 4231:2017 - Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016))
• Effective Date: 08-Jun-2022
• Corrected By: SIST EN 24231:2000/AC1:2001 - Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:1987)
• Effective Date: 08-Jun-2022
• Revised: SIST EN ISO 4231:2017 - Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016))
• Effective Date: 01-Jul-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 2431:1987)Runde Hand- und Maschinen-Schneideisen für zylindrisches Rohrgewinde - Reihe G (ISO 2431:1987)Filieres rondes de filetage, a main et a machine, pour filetages cylindriques de tuyauterie - Série G (ISO 2431:1987)Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 2431:1987)25.100.50Navojna rezalna orodjaTaps and threading diesICS:Ta slovenski standard je istoveten z:EN 24231:1989SIST EN 24231:2000en01-december-2000SIST EN 24231:2000SLOVENSKI
STANDARD



SIST EN 24231:2000



SIST EN 24231:2000



SIST EN 24231:2000



INTERNATIONAL STANDARD INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION MEXaYHAPOAHAFt OPTAHM3A~MR fl0 CTAHAAPTM3AuMM Hand- and machine-operated circular screwing dies for parallel pipe threads - G series Fili&es rondes de fife tage, 2 main et 2 machine, pour filetages c yfindriques de tu yauterie - Serie G ISO 423 1 Second edition 1987-11-15 , Reference number ISO 423 1: 1987 (E) SIST EN 24231:2000



Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bedies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take patt in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 4231 was prepared by Technical Committee ISO/TC 29, Smali tools. This second edition cancels and replaces the first edition (ISO 4231 : 19771, of which it constitutes a minor revision. Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated. 0 International Organkation for Standardkation, 1987 Printed in Switzerland SIST EN 24231:2000



INTERNATIONAL STANDARD ISO 4231 : 1987 (E) Hand-
...