Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2018)

This document specifies requirements for three types of textile-reinforced thermoplastics hose and
hose assembly of nominal size from 3,2 to 25. Each type is divided into two classes dependent on
electrical conductivity requirements.
They are suitable for use with:
— oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging
from −40 °C to +93 °C;
— water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging
from 0 °C to +60 °C
— water at temperatures ranging from 0 °C to +60 °C.
This document does not include requirements for end fittings. It is limited to the performance of hoses
and hose assemblies.
NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the
compatibility of the hose with the fluid to be used.

Kunststoffschläuche und -schlauchleitungen - Textilverstärkte Typen für hydraulische Anwendungen - Spezifikationen (ISO 3949:2018)

Diese Internationale Norm legt Anforderungen für drei Typen von textilverstärkten thermoplastischen Schläuchen und Schlauchleitungen mit einer Nenngröße von 3,2 bis 25 fest. Abhängig von den Anforde-rungen an die elektrische Leitfähigkeit ist jeder Typ in zwei Klassen unterteilt.
Sie sind für den Gebrauch mit:
—   den in ISO 6743 4 festgelegten ölbasierten hydraulischen Flüssigkeiten HH, HL, HM, HR und HV in einem Temperaturbereich von 40 °C bis 100 °C geeignet.
—   den in ISO 6743 4 festgelegten wasserbasierten hydraulischen Flüssigkeiten HFC, HFAE, HFAS und HFB in einem Temperaturbereich von 0 °C bis 60 °C geeignet.
—   Wasser bei Temperaturen im Bereich von 0°C bis 60 °C geeignet.
Diese Internationale Norm enthält keine Anforderungen an Endarmaturen. Sie beschränkt sich auf die Leistung von Schläuchen und Schlauchleitungen.
ANMERKUNG   Es liegt in der Verantwortung des Benutzers, in Absprache mit dem Schlauchhersteller, die Verträglichkeit des Schlauches mit der Flüssigkeit, die verwendet wird, sicherzustellen.

Tuyaux et flexibles en plastique - Types hydrauliques avec armature textile - Spécifications (ISO 3949:2018)

Le présent document spécifie les exigences pour trois types de tuyaux et flexibles thermoplastiques avec armature textile de dimension nominale de 3,2 à 25. Chaque type est divisé en deux classes dépendant des exigences relatives à la conductibilité électrique.
Ils sont destinés à être utilisés avec:
— des fluides hydrauliques à base de pétrole HH, HL, HM, HR et HV tels que définis dans l'ISO 6743‑4 pour une plage de températures de −40 °C à +93 °C;
— des fluides hydrauliques à base d'eau HFC, HFAE, HFAS et HFB tels que définis dans l'ISO 6743‑4 pour une plage de températures de 0 °C à +60 °C;
— de l'eau pour une plage de températures de 0 °C à +60 °C.
Le présent document ne contient pas d'exigences sur les extrémités de raccordement. Il se limite aux performances des tuyaux et des flexibles.
NOTE Il est de la responsabilité de l'utilisateur, en collaboration avec le fabricant du tuyau, d'établir la compatibilité du tuyau avec le fluide à utiliser.

Polimerne cevi in cevni priključki - S tekstilom ojačene vrste za hidravlično uporabo - Specifikacija (ISO 3949:2018)

Ta dokument določa zahteve za tri vrste s tekstilom ojačenih cevi in cevnih priključkov iz plastomerov z nazivno velikostjo od 3,2 do 25. Vsaka vrsta je glede na zahteve električne prevodnosti razdeljena v dva razreda.
Primerni so za uporabo s/z:
– hidravličnimi tekočinami na oljni osnovi HH, HL, HM, HR in HV, kot je opredeljeno v standardu ISO 6743-4, pri temperaturah od −40 °C do 93 °C;
– tekočinami na vodni osnovi HFC, HFAE, HFAS in HFB, kot je opredeljeno v standardu ISO 6743-4, pri temperaturah od 0 °C do 60 °C;
– vodo pri temperaturah od 0 °C do 60 °C.
Ta dokument ne vključuje zahtev za končnike. Standard je omejen na učinkovitost cevi in cevnih priključkov.
OPOMBA: Uporabnik mora po posvetovanju s proizvajalcem cevi določiti združljivost cevi z uporabljeno tekočino.

General Information

Status
Withdrawn
Public Enquiry End Date
14-Jul-2017
Publication Date
10-Sep-2018
Withdrawal Date
31-Aug-2020
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
25-Aug-2020
Due Date
17-Sep-2020
Completion Date
01-Sep-2020

Relations

Buy Standard

Standard
EN ISO 3949:2018
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3949:2018
01-oktober-2018
1DGRPHãþD
SIST EN ISO 3949:2014
3ROLPHUQHFHYLLQFHYQLSULNOMXþNL6WHNVWLORPRMDþHQHYUVWH]DKLGUDYOLþQR
XSRUDER6SHFLILNDFLMD ,62
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications -
Specification (ISO 3949:2018)
Kunststoffschläuche und -schlauchleitungen - Textilverstärkte Typen für hydraulische
Anwendungen - Spezifikationen (ISO 3949:2018)
Tuyaux et flexibles en plastique - Types hydrauliques avec armature textile -
Spécifications (ISO 3949:2018)
Ta slovenski standard je istoveten z: EN ISO 3949:2018
ICS:
83.120 2MDþDQLSROLPHUL Reinforced plastics
83.140.40 Gumene cevi Hoses
SIST EN ISO 3949:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3949:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 3949:2018


EN ISO 3949
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2018
EUROPÄISCHE NORM
ICS 23.040.70; 23.100.40; 83.140.40 Supersedes EN ISO 3949:2014
English Version

Plastics hoses and hose assemblies - Textile-reinforced
types for hydraulic applications - Specification (ISO
3949:2018)
Tuyaux et flexibles en plastique - Types hydrauliques Kunststoffschläuche und -schlauchleitungen -
avec armature textile - Spécifications (ISO 3949:2018) Textilverstärkte Typen für hydraulische Anwendungen
- Spezifikationen (ISO 3949:2018)
This European Standard was approved by CEN on 6 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3949:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3949:2018
EN ISO 3949:2018 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 3949:2018
EN ISO 3949:2018 (E)
European foreword
This document (EN ISO 3949:2018) has been prepared by Technical Committee ISO/TC 45 “Rubber and
rubber products” in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses
and hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2019, and conflicting national standards shall
be withdrawn at the latest by January 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3949:2014.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3949:2018 has been approved by CEN as EN ISO 3949:2018 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 3949:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 3949:2018
INTERNATIONAL ISO
STANDARD 3949
Fifth edition
2018-05
Plastics hoses and hose assemblies —
Textile-reinforced types for hydraulic
applications — Specification
Tuyaux et flexibles en plastique — Types hydrauliques avec armature
textile — Spécifications
Reference number
ISO 3949:2018(E)
©
ISO 2018

---------------------- Page: 7 ----------------------

SIST EN ISO 3949:2018
ISO 3949:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 3949:2018
ISO 3949:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classification . 2
5 Materials and construction . 2
5.1 Hoses . 2
5.2 Hose assemblies . 2
6 Dimensions and tolerances . 2
6.1 Diameters . 2
6.2 Concentricity. 3
7 Physical properties . 3
7.1 Hydrostatic requirements . 3
7.2 Change in length . 4
7.3 Minimum bend radius . 4
7.4 Resistance to impulse . 5
7.5 Leakage of hose assemblies . 5
7.6 Cold flexibility . 5
7.7 Ozone resistance. 5
7.8 Electrical conductivity . 5
7.9 Fluid resistance . 6
7.9.1 Test pieces . 6
7.9.2 Oil resistance . 6
7.9.3 Water-based fluid resistance . 6
7.9.4 Water resistance . . . 6
7.10 Visual examination . 6
8 Frequency of testing . 6
9 Designation . 6
10 Marking . 7
10.1 Hoses . 7
10.2 Hose assemblies . 7
11 Recommendations for packing and storage . 7
12 Recommendations for length of supplied hoses and tolerances on lengths of hose
assemblies . 7
13 Test certificate . 7
Annex A (normative) Type and routine testing of hoses . 8
Annex B (informative) Production testing . 9
Annex C (informative) Recommendations for lengths of supplied hoses and tolerances on
lengths of hose assemblies .10
Annex D (normative) Test method for electrical conductivity .11
Bibliography .12
© ISO 2018 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 3949:2018
ISO 3949:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html
This document was prepared by technical Committee ISO/TC 45, Rubber and rubber products,
Subcommittee SC 1, Rubber and plastics hoses and hose assemblies.
This fifth edition cancels and replaces the fourth edition (ISO 3949:2009), which has been technically
revised. The main changes compared to the previous edition are as follows:
— Clause 1 has been updated to be more precise;
— Requirements for type R8, hose nominal size 8 have been added in Tables 1, 3, 4 and 5;
— Reference to method A1 of ISO 10619-1:2017, has been added in 7.3;
— Additional requirement for marking of hoses has been added in 10.1;
— Reference to ISO 17165-1 has been made in 10.2.
iv © ISO 2018 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 3949:2018
INTERNATIONAL STANDARD ISO 3949:2018(E)
Plastics hoses and hose assemblies — Textile-reinforced
types for hydraulic applications — Specification
1 Scope
This document specifies requirements for three types of textile-reinforced thermoplastics hose and
hose assembly of nominal size from 3,2 to 25. Each type is divided into two classes dependent on
electrical conductivity requirements.
They are suitable for use with:
— oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging
from −40 °C to +93 °C;
— water-based fluids HFC, HFAE, HFAS a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.