SIST EN 4681-001:2014
(Main)Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 001: Technical specification
Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 001: Technical specification
This European Standard specifies the characteristics, test methods, qualification and acceptance conditions of single-core electric cables for general purpose with conductors in aluminium or copper-clad aluminium, intended for installation in aircraft electrical systems. The insulation of these cables is designed to withstand a maximum service voltage of 600 V r.m.s. at a frequency not exceeding 2 000 Hz. They are divided into types, the characteristics of which are given in the product standards. Unless otherwise
specified in the product standard, the tests defined in this standard apply.
Luft- und Raumfahrt - Elektrische Leitungen, für allgemeine Verwendung, mit Leitern aus Aluminium oder kupferbeschichtetem Aluminium - Teil 001: Technische Lieferbedingungen
Diese Norm legt die Eigenschaften, Prüfverfahren, Qualifikations- und Abnahmebedingungen für einadrige elektrische Leitungen mit Leitern aus Aluminium oder kupferbeschichtetem Aluminium, die zur allgemeinen Verwen¬dung und zur Montage im elektrischen Bordnetz von Luftfahrzeugen bestimmt sind, fest.
Die Isolierung dieser Leitungen ist auf eine Höchstbetriebsspannung von 600 V (eff) bei einer Frequenz von höchstens 2 000 Hz ausgelegt.
Die Leitungen sind in Typen aufgeteilt, deren Eigenschaften in den Produktnormen angegeben sind. Falls in der Produktnorm nicht anders festgelegt, sind die in dieser Norm vorgegebenen Prüfungen anzuwenden.
Série aérospatiale - Câbles électriques, d’usage général, avec conducteurs en aluminium ou en aluminium chemisé cuivre - Partie 001: Spécification technique
Aeronavtika - Kabli, električni, za splošne namene, z vodniki iz aluminija ali pobakrenega aluminija - 001. del: Tehnična specifikacija
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen, für allgemeine Verwendung, mit Leitern aus Aluminium oder kupferbeschichtetem Aluminium - Teil 001: Technische LieferbedingungenSérie aérospatiale - Câbles électriques, d’usage général, avec conducteurs en aluminium ou en aluminium chemisé cuivre - Partie 001: Spécification techniqueAerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 001: Technical specification49.060Aerospace electric equipment and systems49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 4681-001:2012SIST EN 4681-001:2014en01-april-2014SIST EN 4681-001:2014SLOVENSKI
STANDARD
SIST EN 4681-001:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4681-001
October 2012 ICS 49.060 English Version
Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 001: Technical specification
Série aérospatiale - Câbles électriques, d'usage général, avec conducteurs en aluminium ou en aluminium chemisé cuivre - Partie 001: Spécification technique
Luft- und Raumfahrt - Elektrische Leitungen, zur allgemeinen Verwendung, mit Leitern aus Aluminium oder kupferbeschichtetem Aluminium - Teil 001: Technische Lieferbedingungen This European Standard was approved by CEN on 25 February 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4681-001:2012: ESIST EN 4681-001:2014
EN 4681-001:2012 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms, definitions and symbols .54Materials and construction of cables .55Required characteristics .56Tests methods .57Quality assurance .98Identification marking . 119Packaging, labelling and delivery lengths . 11 SIST EN 4681-001:2014
EN 4681-001:2012 (E) 3 Foreword This document (EN 4681-001:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the latest by April 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 4681-001:2014
EN 4681-001:2012 (E) 4 1 Scope This European Standard specifies the characteristics, test methods, qualification and acceptance conditions of single-core electric cables for general purpose with conductors in aluminium or copper-clad aluminium, intended for installation in aircraft electrical systems. The insulation of these cables is designed to withstand a maximum service voltage of 600 V r.m.s. at a frequency not exceeding 2 000 Hz. They are divided into types, the characteristics of which are given in the product standards. Unless otherwise specified in the product standard, the tests defined in this standard apply. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3475-100 (all parts), Aerospace series — Cables, electrical, aircraft use — Test methods — Part 100: General EN 3719, Aerospace series — Aluminium or aluminium alloy conductors for electrical cables — Product standard EN 3838, Aerospace series — Requirements and tests on user-applied markings on aircraft electrical cables EN 4651, Aerospace series — Copper-clad aluminium alloy conductors for electrical cables — Product standard 1) EN 4681-002, Aerospace series — Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium — Part 002: General EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts ISO 2574, Aircraft — Electrical cables — Identification marking TR 4648, Aerospace series — Cable, electrical — Re-qualification following changes in design, material or manufacturing process 2)
TR 4684, Aerospace series — Electrical Technology and component definition 3)
1) Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.org). 2) Published as ASD-STAN Technical Report at the date of publication of this standard (www.asd-stan.org). 3) In study at the date of publication of this standard. SIST EN 4681-001:2014
EN 4681-001:2012 (E) 5 3 Terms, definitions and symbols For the purposes of this standard, the terms, definitions and symbols given in EN 3475-100 or TR 4684 apply. 4 Materials and construction of cables 4.1 Conductors They shall conform to EN 4651 or EN 3719 unless otherwise specified. 4.2 Finished cables The insulation material shall present an uniform circular cross-section throughout the length of the cable. Covering over the insulation shall be treated and applied in such a manner that the cables present a smooth appearance and are able to accept marking. All materials used shall have no corrosive effect upon the conductors and shall not be susceptible to attack by mould or other micro-organisms. 5 Required characteristics The characteristics of the cables, tested according to the methods described hereafter shall comply with the values given in the product standard. 6 Tests methods See Table 1. SIST EN 4681-001:2014
EN 4681-001:2012 (E) 6 Table 1 — Tests: methods, application, requirements § No. Tests Requirements (and/or particulars) Description EN 3475- (and/or particulars) Qualification a (Clause 7.1). Each delivery Periodic every three years (7.2.4) On all cables (7.2.1 and
7.2.2) Prior to deliver (7.2.1 and
7.2.2) 6 Test conditions 100
X X X X
6.1 Visual examination 201
3 X
Marking: according to Clause 8 6.2 Mass 202 3
X
Minimum length: 0,5 m 6.3 Dimensions (all) 203 3
X
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.