SIST EN 1263-2:2002

Safety nets - Part 2: Safety requirements for the positioning limits

This European Standard specifies safety requirements for the positioning of safety nets in accordance with the manufacturer's instruction manual and with the product specifications and for the testing of system S, system T, system U and system V safety nets in accordance with EN 1263-1.
Small safety nets of system S according to EN 1263-1 (less than 35 m2 and 5,0 m on the shortest side) are not dealt with in this European Standard.

Schutznetze (Sicherheitsnetze) - Teil 2: Sicherheitstechnische Anforderungen für die Errichtung von Schutznetzen

Diese Europäische Norm enthält sicherheitstechnische Anforderungen für die Errichtung von Schutznetzen in Übereinstimmung mit der Gebrauchsanleitung des Herstellers und mit den Produktfestlegungen und Prüfver-fahren der Schutznetztypen S, T, U und V nach EN 1263-1.
Kleine Schutznetze System S nach EN 1263-1 (kleiner als 35 m2 und 5,0 m auf der kürzesten Seite) sind nicht Gegen-stand dieser Europäischen Norm.

Filets de sécurité - Partie 2 : Exigences de sécurité concernant les limites de montage

La présente Norme européenne spécifie les exigences de sécurité relatives au montage des filets de sécurité conformément au manuel d'instructions du fabricant et aux spécifications du produit, ainsi qu'a la réalisation des essais sur les filets de sécurité de type S, T, U et V conformément a l'EN 1263-1.
Les filets de sécurité de petite taille de type S selon l'EN 1263-1 (plus petits que 35 m2 et 5,0 m du côté le plus court) ne sont pas traités dans la présente Norme européenne.

Varovalne mreže – 2. del: Varnostne zahteve za nameščanje varovalnih mrež

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2002
• Withdrawal Date: 29-Jan-2015
• ICS: 13.340.60 - Protection against falling and slipping
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 28-Jan-2015
• Due Date: 20-Feb-2015
• Completion Date: 30-Jan-2015
• Ref Project: EN 1263-2:2002 - Safety nets - Part 2: Safety requirements for the positioning limits

Relations

• Replaced By: SIST EN 1263-2:2015 - Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits
• Effective Date: 01-Mar-2015
• Replaced By: SIST EN 1263-2:2015 - Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits
• Effective Date: 08-Jun-2022
• Replaces: SIST EN 1263-2:2000 - Safety nets - Part 2: Safety requirements for the erection of safety nets
• Effective Date: 01-Dec-2002

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutznetze (Sicherheitsnetze) - Teil 2: Sicherheitstechnische Anforderungen für die Errichtung von SchutznetzenFilets de sécurité - Partie 2 : Exigences de sécurité concernant les limites de montageSafety nets - Part 2: Safety requirements for the positioning limits13.340.60Protection against falling and slippingICS:Ta slovenski standard je istoveten z:EN 1263-2:2002SIST EN 1263-2:2002en01-december-2002SIST EN 1263-2:2002SLOVENSKI
STANDARDSIST EN 1263-2:20001DGRPHãþD



SIST EN 1263-2:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1263-2August 2002ICS 13.340.99Supersedes EN 1263-2:1998English versionSafety nets - Part 2: Safety requirements for the positioninglimitsFilets de sécurité - Partie 2: Exigences de sécuritéconcernant les limites de montageSchutznetze (Sicherheitsnetze) - Teil 2:Sicherheitstechnische Anforderungen für die Errichtungvon SchutznetzenThis European Standard was approved by CEN on 4 May 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1263-2:2002 ESIST EN 1263-2:2002



EN 1263-2:2002 (E)2ContentspageForeword.31Scope.32Normative references.33Terms and definitions.34Safety requirements.44.1Instruction manual.44.2Fall height.44.3Catching width.55Positioning of system S safety nets.65.1Size of system S safety nets.65.2Positioning with tie ropes.65.3Safety net linkage.75.4Deformation of the safety net.76Positioning of system T safety nets.86.1Positioning.86.2Safety net linkage.86.3Support frame positioning.97Positioning of system U safety nets.98Positioning of system V safety nets.98.1Position of the upper edge of the safety net.98.2Safety net linkage.108.3Positioning.10Annex A (informative)
A-deviations.11SIST EN 1263-2:2002



EN 1263-2:2002 (E)3ForewordThis document EN 1263-2:2002 has been prepared by Technical Committee CEN/TC 53 "Temporary worksequipment", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2002, and conflicting national standards shall be withdrawn at the latestby February 2002.This document supersedes EN 1263-2:1998.Amendments: Table 1 is added, Figure 5 is deleted, Figure 8 is revised.This European Standard is one of a series of standards as listed below:EN 1263-1, Safety nets - Part 1: Safety requirements, test methods.EN 1263-2, Safety nets - Part 2: Safety requirements for the positioning limits.Annex A is informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.1 ScopeThis European Standard specifies safety requirements for the positioning of safety nets in accordance with themanufacturer's instruction manual and with the product specifications and for the testing of system S, system T,system U and system V safety nets in accordance with EN 1263-1.Small safety nets of system S according to EN 1263-1 (less than 35 m2 and 5,0 m on the shortest side) are notdealt with in this European Standard.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 1263-1, Safety nets - Part 1: Safety requirements, test methods.prEN 13374, Temporary edge protection systems - Product specification, test methods.3 Terms and definitionsFor the purposes of this European Standard, the terms and defin
...