SIST EN ISO 11114-3:2011
(Main)Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010)
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010)
This part of ISO 11114 specifies a test method to determine the autogenous ignition temperature of non-metallic materials in pressurized gaseous oxygen. The autogenous ignition temperature is one criterion for ranking materials, and can be used to assist with the choice of materials used in the presence of gaseous oxygen. A comprehensive bibliography of the published material on which this part of ISO 11114 is based is included. It is intended that this part of ISO 11114 be used for the selection of non-metallic materials for gas cylinders and accessories, for example to select the materials in order to meet the requirement for type testing for oxygen compatibility of all cylinder valves for highly oxidizing gases as specified in ISO 10297.
Ortsbewegliche Gasflaschen - Verträglichkeit von Flaschen- und Ventilwerkstoffen mit den in Berührung kommenden Gasen - Teil 3: Prüfung der Selbstentzündungstemperatur von nichtmetallischen Werkstoffen in Sauerstoffatmosphäre (ISO 11114-3:2010)
Diese Norm legt ein Prüfverfahren zur Bestimmung der Selbstentzündungstemperatur von nichtmetallischen
Werkstoffen in verdichtetem gasförmigem Sauerstoff fest.
Die Selbstentzündungstemperatur stellt eines der Kriterien für die Klassifizierung von Werkstoffen dar und
kann als Hilfe bei der Werkstoffauswahl für die Verwendung in gasförmigem Sauerstoff angewendet werden.
Der Anhang B dieser Norm ist eine umfassende Bibliographie der Veröffentlichungen, auf denen diese Norm
basiert.
ANMERKUNG Diese Norm kann für die Auswahl von nichtmetallischen Werkstoffen für Gasflaschen und
Ausrüstungsteile angewendet werden, z. B. um die Werkstoffe auszuwählen, die die Anforderungen der in der ISO 10297
angegebenen Typprüfung hinsichtlich der Sauerstoffverträglichkeit aller Sauerstoff-Gasflaschenventile erfüllen.
Bouteilles à gaz - Compatibilité des matériaux de bouteilles et de robinets avec les contenus gazeux - Partie 3: Essai d'auto-inflammation des matériaux non métalliques sous atmosphère d'oxygène (ISO 11114-3:2010)
L'ISO 11114-3:2010 spécifie une méthode d'essai pour la détermination de la température d'auto-inflammation des matériaux non métalliques dans l'oxygène gazeux sous pression.
La température d'auto-inflammation est un critère de classement des matériaux; elle permet donc d'aider au choix des matériaux utilisés en présence d'oxygène gazeux.
Une bibliographie exhaustive de la documentation publiée sur laquelle se fonde l'ISO 11114-3:2010 est incluse.
Il est prévu d'utiliser l'ISO 11114-3:2010 pour le choix des matériaux non métalliques destinés aux bouteilles à gaz et à leurs accessoires, par exemple pour choisir les matériaux devant satisfaire aux exigences de l'essai de type pour la compatibilité avec l'oxygène de tous les robinets de bouteilles à gaz hautement comburants spécifiés dans l'ISO 10297.
Premične plinske jeklenke - Združljivost materialov za ventil in jeklenko s plinom - 3. del: Preskus samovžiga nekovinskih materialov v kisikovi atmosferi (ISO 11114-3:2010)
Ta del ISO 11114 opredeljuje preskusno metodo za določanje temperature samovžiga nekovinskih materialov v plinastem kisiku pod tlakom. Temperatura samovžiga je eden od kriterijev za razvrščanje materialov in se lahko uporablja kot pomoč pri izbiri materialov, ki se uporabljajo v prisotnosti plinastega kisika. Vključena je obsežna bibliografija objavljenih gradiv, na katerih temelji ta del ISO 11114. Mišljeno je, da se ta del ISO 11114 uporablja za izbiro nekovinskih materialov za plinske jeklenke in dodatke, na primer za izbiro materialov, ki bodo ustrezali zahtevam za tipsko preskušanje združljivosti s kisikom vseh ventilov za jeklenke pri močno oksidativnih plinih, kot določa ISO 10297.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11114-3:2011
01-november-2011
1DGRPHãþD
SIST EN ISO 11114-3:1999
SIST EN ISO 11114-3:1999/AC:1999
3UHPLþQHSOLQVNHMHNOHQNH=GUXåOMLYRVWPDWHULDORY]DYHQWLOLQMHNOHQNRVSOLQRP
GHO 3UHVNXVVDPRYåLJDQHNRYLQVNLKPDWHULDORYYNLVLNRYLDWPRVIHUL ,62
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3:
Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-
3:2010)
Ortsbewegliche Gasflaschen - Verträglichkeit von Flaschen- und Ventilwerkstoffen mit
den in Berührung kommenden Gasen - Teil 3: Prüfung der Selbstentzündungstemperatur
von nichtmetallischen Werkstoffen in Sauerstoffatmosphäre (ISO 11114-3:2010)
Bouteilles à gaz - Compatibilité des matériaux de bouteilles et de robinets avec les
contenus gazeux - Partie 3: Essai d'auto-inflammation des matériaux non métalliques
sous atmosphère d'oxygène (ISO 11114-3:2010)
Ta slovenski standard je istoveten z: EN ISO 11114-3:2010
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN ISO 11114-3:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11114-3:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 11114-3:2011
EUROPEAN STANDARD
EN ISO 11114-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2010
ICS 23.020.30 Supersedes EN ISO 11114-3:1997
English Version
Gas cylinders - Compatibility of cylinder and valve materials with
gas contents - Part 3: Autogenous ignition test for non-metallic
materials in oxygen atmosphere (ISO 11114-3:2010)
Bouteilles à gaz - Compatibilité des matériaux de bouteilles Ortsbewegliche Gasflaschen - Verträglichkeit von
et de robinets avec les contenus gazeux - Partie 3: Essai Flaschen- und Ventilwerkstoffen mit den in Berührung
d'auto-inflammation des matériaux non métalliques sous kommenden Gasen - Teil 3: Prüfung der
atmosphère d'oxygène (ISO 11114-3:2010) Selbstentzündungstemperatur von nichtmetallischen
Werkstoffen in Sauerstoffatmosphäre (ISO 11114-3:2010)
This European Standard was approved by CEN on 14 December 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11114-3:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11114-3:2011
EN ISO 11114-3:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11114-3:2011
EN ISO 11114-3:2010 (E)
Foreword
This document (EN ISO 11114-3:2010) has been prepared by Technical Committee ISO/TC 58 "Gas
cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat
of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at
the latest by June 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11114-3:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11114-3:2010 has been approved by CEN as a EN ISO 11114-3:2010 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11114-3:2011
---------------------- Page: 6 ----------------------
SIST EN ISO 11114-3:2011
INTERNATIONAL ISO
STANDARD 11114-3
Second edition
2010-12-15
Gas cylinders — Compatibility of cylinder
and valve materials with gas contents —
Part 3:
Autogenous ignition test for non-metallic
materials in oxygen atmosphere
Bouteilles à gaz — Compatibilité des matériaux de bouteilles et de
robinets avec les contenus gazeux —
Partie 3: Essai d'auto-inflammation des matériaux non métalliques sous
atmosphère d'oxygène
Reference number
ISO 11114-3:2010(E)
©
ISO 2010
---------------------- Page: 7 ----------------------
SIST EN ISO 11114-3:2011
ISO 11114-3:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11114-3:2011
ISO 11114-3:2010(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Principle.1
3 Preparation of test samples .1
4 Test apparatus.1
5 Oxygen purity .3
6 Test procedure.3
7 Results.4
8 Test record.4
Annex A (informative) Test record sheet.5
Bibliography.6
© ISO 2010 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 11114-3:2011
ISO 11114-3:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
This part of ISO 11114 was prepared by Technical Committee ISO/TC 58, Gas cylinders.
This second edition cancels and replaces the first edition (ISO 11114-3:1997). No significant technical
changes have been made.
ISO 11114 consists of the following parts, under the general title Gas cylinders — Compatibility of cylinder and
valve materials with gas contents:
⎯ Part 1: Metallic materials
⎯ Part 2: Non-metallic materials
⎯ Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere
⎯ Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement
iv © ISO 2010 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 11114-3:2011
ISO 11114-3:2010(E)
Introduction
The following test method is referenced in ISO 11114-1 and ISO 11114-2.
Further information about oxygen compatibility is given in ISO 11114-1 and ISO 11114-2.
Other oxygen compatibility test methods include oxygen index (see ISO 4589-3), heat of combustion and
adiabatic compression on materials (see ISO 21010).
© ISO 2010 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 11114-3:2011
---------------------- Page: 12 ----------------------
SIST EN ISO 11114-3:2011
INTERNATIONAL STANDARD ISO 11114-3:2010(E)
Gas cylinders — Compatibility of cylinder and valve materials
with gas contents —
Part 3:
Autogenous ignition test for non-metallic materials in oxygen
atmosphere
1 Scope
This part of ISO 11114 specifies a test method to determine the autogenous ignition temperature of non-
metallic materials in pressurized gaseous oxygen.
The autogenous ignition temperature is one criterion for ranking materials, and can be used to assist with the
choice of materials used in the presence of gaseous oxygen.
A comprehensive bibliography of the published material on which this part of ISO 11114 is based is included.
It is intended that this part of ISO 11114 be used for the selection of non-metallic materials for gas cylinders
and accessories, for example to select the materials in order to meet the requirement for type testing for
oxygen compatibility of all cylinde
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.