SIST EN 17928-2:2025
(Main)Gas infrastructure - Injection stations - Part 2: Specific requirements regarding the injection of biomethane
Gas infrastructure - Injection stations - Part 2: Specific requirements regarding the injection of biomethane
This document describes the specific functional requirements for injection stations for biomethane into gas transmission and distribution systems operated with gases of the 2nd gas family in accordance with EN 437 in addition to the general functional requirements of EN xxxxx-1 (WI 00234087).
This document represents the state of the art at the time of its preparation. This document does not apply to injection stations operating prior to the publication of this document.
This document specifies common basic principles for gas infrastructure. Users of this document are expected to be aware of more detailed national standards and/or codes of practice in the CEN member countries. This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with the requirements of this document, the national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts).
CEN/TR 13737 (all parts) gives:
— clarification of all legislations/regulations applicable in a member state;
— if appropriate, more restrictive national requirements;
— a national contact point for the latest information.
Gasinfrastruktur - Einspeiseanlagen - Teil 2: Spezifische Anforderungen für die Einspeisung von Biomethan
Dieses Dokument legt spezifische funktionale Anforderungen an Einspeiseanlagen für Biomethan in Gastransport- und Verteilsystemen, die mit Gasen der zweiten Gasfamilie nach EN 437 betrieben werden, zusätzlich zu den allgemeinen funktionalen Anforderungen in prEN 17928-1 fest.
Dieses Dokument enthält die Empfehlungen zum Zeitpunkt seiner Erstellung. Dieses Dokument ist nicht für vor der Veröffentlichung desselben in Betrieb genommene Einspeiseanlagen anwendbar.
Dieses Dokument ergänzt prEN 17928-1 durch die Festlegung technischer Sicherheitsanforderungen, die im Hinblick auf die chemischen und physikalischen Eigenschaften von Biomethan zu beachten sind, fest.
Dieses Dokument legt gemeinsame Grundprinzipien für die Gasinfrastruktur fest. Die Anwender dieses Dokuments sollten sich bewusst sein, dass ausführlichere nationale Normen und/oder Verfahrensregeln in den CEN-Mitgliedstaaten bestehen können.
Dieses Dokument soll in Verbindung mit diesen, die oben erwähnten allgemeinen Grundsätze darlegenden nationalen Normen und/oder Technischen Regeln angewendet werden.
Im Fall von zusätzlichen Anforderungen in nationalen gesetzlichen Vorschriften/Verordnungen zu diesem Dokument, verdeutlicht CEN/TR 13737 (alle Teile) diese Anforderungen.
CEN/TR 13737 (alle Teile) enthält:
- Gesetzliche Vorschriften/Verordnungen in einem Mitgliedsstaat;
- ggf. weitergehende strengere nationale Anforderungen;
- einen nationalen Ansprechpartner für die Weitergabe neuester Informationen.
Infrastructures gazières - Stations d'injection - Partie 2 : Exigences spécifiques concernant l'injection de biométhane
Le présent document établit des exigences fonctionnelles spécifiques pour les stations d'injection de biométhane dans les réseaux de transport et de distribution de gaz exploités avec des gaz de la deuxième famille conformément à l'EN 437, en plus des exigences fonctionnelles générales du prEN 17928-1.
Le présent document représente les recommandations en vigueur au moment de son élaboration. Le présent document ne s'applique pas aux stations d'injection en fonctionnement avant la publication du présent document.
Le présent document complète le prEN 17928-1 en spécifiant les exigences techniques de sécurité à respecter en ce qui concerne les propriétés chimiques et physiques du biométhane.
Le présent document spécifie les principes de base communs pour les infrastructures gazières. Il convient que les utilisateurs du présent document gardent à l'esprit l'existence éventuelle, dans les pays membres du CEN, de codes de pratique et/ou de Normes nationales plus détaillés.
Le présent document est destiné à être appliqué conjointement avec ces normes nationales et/ou codes de pratique, qui détaillent les principes de base précités.
Si la législation/réglementation nationale contient des termes relatifs à des exigences supplémentaires, en plus de ceux du présent document, le CEN/TR 13737 (toutes les parties) illustre ces termes.
Le CEN/TR 13737 (toutes les parties) donne :
- la législation/les réglementations applicables dans un État membre ;
- si applicable, des exigences nationales plus contraignantes ;
- un point de contact national pour les informations les plus récentes.
Infrastruktura za plin - Postaje za injiciranje - 2. del: Posebne zahteve za injiciranje biometana
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2025
Infrastruktura za plin - Postaje za injiciranje - 2. del: Posebne zahteve za injiciranje
biometana
Gas infrastructure - Injection stations - Part 2: Specific requirements regarding the
injection of biomethane
Gasinfrastruktur - Einspeiseanlagen - Teil 2: Spezifische Anforderungen für die
Einspeisung von Biomethan
Infrastructures gazières - Stations d'injection - Partie 2 : Exigences spécifiques
concernant l'injection de biométhane
Ta slovenski standard je istoveten z: EN 17928-2:2024
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.180.01 Oprema za industrijo nafte in Equipment for petroleum and
zemeljskega plina na splošno natural gas industries in
general
75.200 Oprema za skladiščenje Petroleum products and
nafte, naftnih proizvodov in natural gas handling
zemeljskega plina equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17928-2
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2024
EUROPÄISCHE NORM
ICS 75.200
English Version
Gas infrastructure - Injection stations - Part 2: Specific
requirements regarding the injection of biomethane
Infrastructures gazières - Stations d'injection - Partie 2 Gasinfrastruktur - Einspeiseanlagen - Teil 2:
: Exigences spécifiques concernant l'injection de Spezifische Anforderungen für die Einspeisung von
biométhane Biomethan
This European Standard was approved by CEN on 7 July 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17928-2:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General requirements . 4
5 Operational functions . 4
6 Overall safety requirements and protection against inadmissible operating modes -
Protection against inadmissible underpressure . 5
7 Requirements on stations, components and assemblies . 5
7.1 Inadmissible gas composition from the upgrading station . 5
7.2 Check of biomethane quality. 5
7.2.1 General . 5
7.2.2 Specific parameters . 5
7.3 Odorization . 6
Bibliography . 7
European foreword
This document (EN 17928-2:2024) has been prepared by Technical Committee CEN/TC 234 “Gas
infrastructure”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2025, and conflicting national standards shall be
withdrawn at the latest by April 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document is intended to be used in conjunction with EN 17928-1:2024.
This document is part of the EN 17928 series, Gas infrastructure - Injection stations:
— Part 1: General requirements
— Part 2: Specific requirements regarding the injection of biomethane
— Part 3: Specific requirements regarding the injection of hydrogen
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document establishes specific functional requirements for injection stations for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.