SIST EN ISO 16119-3:2013
(Main)Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)
This part of ISO 16119 specifies requirements and the means for their verification for the design and performance of sprayers for bush and tree crops, as defined in 3.1, and similar crops, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It is not applicable to human-mounted sprayers for bushes or trees. It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those which are stated in ISO 16119-1, the requirements of this part of ISO 16119 take precedence over the requirements of ISO 16119-1 for machines within the scope of this part of ISO 16119. This part of ISO 16119 does not cover safety aspects (see ISO 4254-6). This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.
Land- und Forstmaschinen - Pflanzenschutzgeräte zum Ausbringen von Pflanzenschutzmitteln und flüssigen Düngemitteln - Umweltschutz - Teil 3: Sprühgeräte für Raumkulturen und vergleichbare Geräte (ISO 16119-3:2013)
Diese Norm legt Anforderungen an die Konstruktion und Leistung von Sprühgeräten für Raumkulturen und
vergleichbaren Geräten, wie unter 3.1 definiert, hinsichtlich der weitestgehenden Reduzierung des Risikos
von Verunreinigungen der Umwelt und die Verfahren für die Verifizierung dieser Anforderungen fest.
Dieser Teil der Norm gilt in Verbindung mit ISO/DIS 16119-1:2010, die allgemeine Anforderungen an
Pflanzenschutzgeräte zum Ausbringen von Pflanzenschutzmitteln und flüssigen Düngemitteln enthält.
ANMERKUNG Die Anforderungen basieren auf den Prüfverfahren nach ISO 5682-2:1997, die insbesondere für
Pflanzenschutzgeräte mit hydraulischer Zerstäubung entwickelt wurden. Für andere Pflanzenschutzgeräte können andere
Prüfverfahren und/oder -kriterien erforderlich sein. Dies muss Gegenstand einer künftigen Untersuchung und einer
eventuellen Änderung dieser Norm sein.
Matériel agricole et forestier - Exigences environnementales pour les pulvérisateurs - Partie 3: Pulvérisateurs pour arbustes et arboriculture (ISO 16119-3:2013)
L'ISO 16119-3:2013 spécifie les exigences et les méthodes de vérification correspondantes pour la conception et les performances des pulvérisateurs pour arbustes et arboriculture et similaires, avec l'objectif de réduire les risques de contamination de l'environnement durant leur utilisation, y compris lors d'une mauvaise utilisation raisonnablement prévisible par le fabricant.
Elle n'est pas applicable aux pulvérisateurs pour arbustes et arboriculture portés par l'opérateur.
Elle est prévue pour être utilisée conjointement avec l'ISO 16119‑1, qui donne les exigences générales applicables à tous les types de pulvérisateurs couverts par l'ISO 16119. Lorsque les exigences de l'ISO 16119-3:2013 diffèrent de celles énoncées dans l'ISO 16119‑1, les exigences de l'ISO 16119-3:2013 prennent le pas sur celles de l'ISO 16119‑1 pour les machines faisant partie du domaine d'application de l'ISO 16119-3:2013. La présente partie de l'ISO 16119 ne couvre pas les aspects de sécurité (voir l'ISO 4254‑6).
L'ISO 16119-3:2013 n'est pas applicable aux pulvérisateurs qui sont fabriqués avant sa date de publication.
Kmetijski in gozdarski stroji - Okoljevarstvene zahteve za škropilnice - 3. del: Škropilnice za grmovnice in drevesa (ISO 16119-3:2013)
Ta del standarda ISO 16119 opredeljuje zahteve in načine za njihovo preverjanje glede projektiranja in lastnosti škropilnic za grmovnice in drevesa, kot je opredeljeno v točki 3.1, in podobne sadeže, pri čemer si je treba prizadevati za čim manjše tveganje okoljskega onesnaženja med uporabo, vključno s predvideno nepravilno uporabo. Standard se ne uporablja za nahrbtne škropilnice za grmovnice ali drevesa. Standard je treba uporabljati s standardom ISO 16119-1, ki določa splošne zahteve za vse vrste škropilnic, obravnavane v standardu ISO 16119. Ko se zahteve tega dela standarda ISO 16119 razlikujejo od zahtev, navedenih v standardu ISO 16119-1, imajo zahteve tega dela standarda ISO 16119 prednost pred zahtevami standarda ISO 16119-1 za stroje v okviru tega dela standarda ISO 16119. Ta del standarda ISO 16119 ne vključuje varnostnih vidikov (glej standard ISO 4254-6). Ta del standarda ISO 16119 se ne uporablja za škropilnice, izdelane pred datumom njegove objave.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 16119-3:2013
01-maj-2013
1DGRPHãþD
SIST EN 12761-3:2001
Kmetijski in gozdarski stroji - Okoljevarstvene zahteve za škropilnice - 3. del:
Škropilnice za grmovnice in drevesa (ISO 16119-3:2013)
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3:
Sprayers for bush and tree crops (ISO 16119-3:2013)
Land- und Forstmaschinen - Pflanzenschutzgeräte zum Ausbringen von
Pflanzenschutzmitteln und flüssigen Düngemitteln - Umweltschutz - Teil 3: Sprühgeräte
für Raumkulturen und vergleichbare Geräte (ISO 16119-3:2013)
Matériel agricole et forestier - Exigences environnementales pour les pulvérisateurs -
Partie 3: Pulvérisateurs pour arbustes et arboriculture (ISO 16119-3:2013)
Ta slovenski standard je istoveten z: EN ISO 16119-3:2013
ICS:
13.020.01 Okolje in varstvo okolja na Environment and
splošno environmental protection in
general
65.060.25 2SUHPD]DVNODGLãþHQMH Equipment for storage,
SULSUDYRLQUD]GHOMHYDQMH preparation and distribution
JQRMLY of fertilizers
SIST EN ISO 16119-3:2013 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 16119-3:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 16119-3:2013
EUROPEAN STANDARD
EN ISO 16119-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2013
ICS 65.060.40 Supersedes EN 12761-3:2001
English Version
Agricultural and forestry machinery - Environmental
requirements for sprayers - Part 3: Sprayers for bush and tree
crops (ISO 16119-3:2013)
Matériel agricole et forestier - Exigences Land- und Forstmaschinen - Pflanzenschutzgeräte zum
environnementales pour les pulvérisateurs - Partie 3: Ausbringen von Pflanzenschutzmitteln und flüssigen
Pulvérisateurs pour arbustes et arboriculture (ISO 16119- Düngemitteln - Umweltschutz - Teil 3: Sprühgeräte für
3:2013) Raumkulturen und vergleichbare Geräte (ISO 16119-
3:2013)
This European Standard was approved by CEN on 5 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16119-3:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16119-3:2013
EN ISO 16119-3:2013 (E)
Contents Page
Foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 2009/127/EC amending 2006/42/EC. 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 16119-3:2013
EN ISO 16119-3:2013 (E)
Foreword
This document (EN ISO 16119-3:2013) has been prepared by Technical Committee CEN/TC 144 “Tractors
and machinery for agriculture and forestry", the secretariat of which is held by AFNOR, in collaboration with
Technical Committee ISO/TC 23 "Tractors and machinery for agriculture and forestry".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2013, and conflicting national standards shall be
withdrawn at the latest by September 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12761-3:2001.
The following major changes were introduced:
extension of the scope;
updating of the normative references;
addition of a definition;
addition of a new clause "List of significant hazards";
revision of requirements on control of spray drift and on cleaning;
addition of a clause "Verification";
completion of clause "Instruction handbook";
deletion of Annex A "Test method for cleaning plant protection product cans", and deletion of Annex B
"Example of device for cleaning of plant protection product cans" and addition of a reference to
ISO 21278-1;
addition of Annex ZA.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 16119-3:2013
EN ISO 16119-3:2013 (E)
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EC Directive 2009/127/EC amending 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2009/127/EC amending 2006/42/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
4
---------------------- Page: 6 ----------------------
SIST EN ISO 16119-3:2013
INTERNATIONAL ISO
STANDARD 16119-3
First edition
2013-03-01
Agricultural and forestry
machinery — Environmental
requirements for sprayers —
Part 3:
Sprayers for bush and tree crops
Matériel agricole et forestier — Exigences environnementales pour les
pulvérisateurs —
Partie 3: Pulvérisateurs pour arbustes et arboriculture
Reference number
ISO 16119-3:2013(E)
©
ISO 2013
---------------------- Page: 7 ----------------------
SIST EN ISO 16119-3:2013
ISO 16119-3:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 16119-3:2013
ISO 16119-3:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 List of significant hazards . 2
5 Requirements . 3
5.1 General . 3
5.2 Volume/hectare adjustment system . 8
5.3 Distribution of liquid and air . 8
5.4 Cleaning . 9
5.5 Cleaning devices .10
5.6 Additional requirements for spray guns and lances .10
6 Verification .10
7 Marking .11
8 Instruction handbook .11
Bibliography .12
© ISO 2013 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 16119-3:2013
ISO 16119-3:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16119-3 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 144, Tractors and machinery for agriculture and forestry, in collaboration with ISO Technical
Committee TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 6, Equipment
for crop protection, in accordance with the Agreement on technical cooperation between ISO and CEN
(Vienna Agreement).
ISO 16119 consists of the following parts, under the general title Agricultural and forestry machinery —
Environmental requirements and testing for sprayers:
— Part 1: General
— Part 2: Horizontal boom sprayers
— Part 3: Sprayers for bush and tree crops
— Part 4: Fixed and semi-mobile sprayers
iv © ISO 2013 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 16119-3:2013
ISO 16119-3:2013(E)
Introduction
The requirements of this part of ISO 16119 are based on the test methods given in ISO 5682-2:1997,
which were primarily developed for hydraulic sprayers. For other types of sprayers, other test methods
and/or test criteria may be needed and may be the subject of future investigation/revision of this part
of ISO 16119.
This document is a type C standard as stated in ISO 12100.
The machinery concerned and the extent to which hazards, hazardous situations and hazardous events
are covered are indicated in the scope of this document.
When provisions of this type C standard are different from those which are stated in type A or B standards,
the provisions of this type C standard take precedence over the provisions of the other standards, for
machines that have been designed and built according to the provisions of this type C standard.
© ISO 2013 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 16119-3:2013
---------------------- Page: 12 ----------------------
SIST EN ISO 16119-3:2013
INTERNATIONAL STANDARD ISO 16119-3:2013(E)
Agricultural and forestry machinery — Environmental
requirements for sprayers —
Part 3:
Sprayers for bush and tree crops
1 Scope
This part of ISO 16119 specifies requirements and the means for their verification for the design and
performance of sprayers for bush and tree crops, as defined in 3.1, and similar crops, with regard
to minimizing the potential risk of environmental contamination during use, including misuse
foreseeable by the manufacturer.
It is not applicable to human-mounted sprayers for bushes or trees.
It is intended to be used with ISO 16119-1, which gives general requirements common to all the
sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from
those which are stated in ISO 16119-1, the requirements of this part of ISO 16119 take precedence over
the requirements of ISO 16119-1 for machines within the scope of this part of ISO 16119. This part of
ISO 16119 does not cover safety aspects (see ISO 4254-6).
This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 4102, Equipment for crop protection — Sprayers — Connection threading
ISO 4254-6:2009, Agricultural machinery — Safety — Part 6: Sprayers and liquid fertilizer distributors
ISO 4288, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and
procedures for the assessment of surface texture
ISO 5681, Equipment for crop protection — Vocabulary
ISO 5682-1, Equipment for crop protection — Spraying equipment — Part 1: Test methods for sprayer nozzles
ISO 5682-2:1997, Equipment for crop protection — Spraying equipment — Part 2: Test methods for
hydraulic sprayers
ISO 5682-3:1996, Equipment for crop protection — Spraying equipment — Part 3: Test method for
volume/hectare adjustment systems of agricultural hydraulic pressure sprayers
ISO 9357, Equipment for crop protection — Agricultural sprayers — Tank nominal volume and filling
hole diameter
ISO 9898:2000, Equipment for crop protection — Test methods for air-assisted sprayers for bush and tree crops
ISO 13440:1996, Equipment for crop protection — Agricultural sprayers — Determination of the volume of
total residual
© ISO 2013 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST EN ISO 16119-3:2013
ISO 16119-3:2013(E)
ISO 16119-1:2013, Agricultural and forestry machinery — Environmental requirements for sprayers —
Part 1: General
ISO 21278-1, Equipment for crop protection — Induction hoppers — Part 1: Test methods
ISO 21278-2, Equipment for crop protection — Induction hoppers — Part 2: General requirements and
performance limits
ISO 22368-1, Crop protection equipment — Test methods for the evaluation of cleaning systems — Part 1:
Internal cleaning of complete sprayers
ISO 22368-3, Crop protection equipment — Test methods for the evaluation of cleaning systems — Part 3:
Internal cleaning of tank
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5681 and the following apply.
3.1
sprayer for bush and tree crops
machine for spraying plant protection products on bush and tree crops such as grapes, fruits or hops (including
annual plants/crops), the application being mostly directed sideways and/or upwards to the target
3.2
plant protection product container
collective name for plant protection product packaging
EXAMPLE Can, bottle, bag, sack, box.
3.3
cleaning device
device for cleaning the insides of empty plant protection product containers
Note 1 to entry: The device may be an integral part of the sprayer or an independent installation (e.g.
stationary equipment).
4 List of significant hazards
Table 1 specifies the significant hazards, the significant hazardous situations and significant hazardous
event(s) covered by this part of ISO 16119 that have been identified by risk assessment as being relevant
for this type of machine with regard to environmental contamination, and which require specific action
by the designer or manufacturer to eliminate or to reduce environmental contamination.
Attention is drawn to the necessity to verify that the environmental requirements specified in both
ISO 16119-1 and this part of ISO 16119 apply to each significant
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.