Communication cables - Specifications for test methods - Part 4-16: Environmental test methods - Circuit integrity under fire conditions

This European Standard, part of EN 50289, specifies the criteria for copper data and telecom cables designed to have intrinsic resistance to fire and intended for use as emergency circuits for alarm, lighting and communication purposes. This European Standard is applicable to copper data and telecom cables for emergency circuit. The test method is limited to cables with an overall diameter not exceeding 20 mm. The test method is described in EN 50200. This European Standard is to be used with EN 50200 for CPD/CPR purpose.

Kommunikationskabel - Spezifikationen für Prüfverfahren - Teil 4-16: Umweltprüfverfahren - Funktionserhalt im Brandfall

Câbles de communication - Spécification des méthodes d'essais - Partie 4-16: Méthodes d'essais d’environnement - Intégrité du circuit en cas d'incendie

Komunikacijski kabli - Specifikacije za preskusne metode - 4-16. del: Preskusne metode za okolje - Celovitost tokokroga v požarnih razmerah

Ta evropski standard, ki je del standarda EN 50289, določa merila za bakrene podatkovne in telekomunikacijske kable, ki so sami po sebi odporni proti požarom in namenjeni za uporabo kot zasilni tokokrogi za namene zvočnih opozoril, razsvetljave in komunikacije. Ta evropski standard velja za bakrene podatkovne in telekomunikacijske zasilne tokokroge. Preskusna metoda je omejena na kable, katerih skupni premer ne presega 20 mm. Preskusna metoda je opisana v standardu EN 50200. Ta evropski standard je treba uporabljati s standardom EN 50200 za namen direktive o gradbenih proizvodih/uredbe o gradbenih proizvodih.

General Information

Status
Withdrawn
Publication Date
23-Sep-2012
Withdrawal Date
11-Sep-2019
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
12-Sep-2019
Due Date
05-Oct-2019
Completion Date
12-Sep-2019

Relations

Buy Standard

Standard
EN 50289-4-16:2012
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50289-4-16:2012
01-oktober-2012
Komunikacijski kabli - Specifikacije za preskusne metode - 4-16. del: Preskusne
metode za okolje - Celovitost tokokroga v požarnih razmerah
Communication cables - Specifications for test methods - Part 4-16: Environmental test
methods - Circuit integrity under fire conditions
Kommunikationskabel - Spezifikationen für Prüfverfahren - Teil 4-16:
Umweltprüfverfahren - Funktionserhalt im Brandfall
Câbles de communication - Spécification des méthodes d'essais - Partie 4-16: Méthodes
d'essais d’environnement - Intégrité du circuit en cas d'incendie
Ta slovenski standard je istoveten z: EN 50289-4-16:2012
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 50289-4-16:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50289-4-16:2012

---------------------- Page: 2 ----------------------

SIST EN 50289-4-16:2012

EUROPEAN STANDARD
EN 50289-4-16

NORME EUROPÉENNE
August 2012
EUROPÄISCHE NORM

ICS 33.120.10


English version


Communication cables -
Specifications for test methods -
Part 4-16: Environmental test methods -
Circuit integrity under fire conditions



Câbles de communication -  Kommunikationskabel -
Spécifications des méthodes d'essais - Spezifikationen für Prüfverfahren -
Partie 4-16: Méthodes d'essais Teil 4-16: Umweltprüfverfahren -
d’environnement - Funktionserhalt im Brandfall
Intégrité du circuit en cas d'incendie






This European Standard was approved by CENELEC on 2012-07-09. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50289-4-16:2012 E

---------------------- Page: 3 ----------------------

SIST EN 50289-4-16:2012
EN 50289-4-16:2012 - 2 -


Contents Page

Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Circuit Integrity . 4
3.1 General . 4
3.2 Circuit integrity classification . 5
4 Test procedure . 5
4.1 Preliminary tests . 5
4.2 EN 50200 . 5
4.3 Electrical test during fire . 5
5 Requirements . 6
6 Marking on the sheath of the cable . 6

Tables
Table 1 – Maximum frequency required tests and requirements . 4
Table 2 – Circuit integrity class . 5
Table 3 – Period between two measurements . 5
Figure 1 – Test fixture . 6

---------------------- Page: 4 ----------------------

SIST EN 50289-4-16:2012
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.