SIST EN 16286-1:2024
(Main)Railway applications - Gangway systems between vehicles - Part 1: Main applications
Railway applications - Gangway systems between vehicles - Part 1: Main applications
This European Standard defines the technical and safety requirements applicable to gangway systems used in all railway vehicles such as tram, tram trains, coaches, metro, suburban, main line and high speed trains that carry passengers. A gangway system gives comfortable passage from one vehicle to the other and consists of a flexible component which allows relative movement between vehicles.
It also defines:
- the requirements for the safety for passengers and/or staff in the gangway while the train is running;
- the assessment methods as well as pass/fail criteria for gangways installed on vehicles.
Bahnanwendungen - Übergangssysteme zwischen Fahrzeugen - Teil 1: Hauptanwendungen
Applications ferroviaires - Systèmes d'intercirculation entre véhicules - Partie 1: Applications générales
Železniške naprave - Prehodni sistemi med vozili - 1. del: Glavne vrste uporabe
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Železniške naprave - Prehodni sistemi med vozili - 1. del: Glavne vrste uporabe
Railway applications - Gangway systems between vehicles - Part 1: Main applications
Bahnanwendungen - Übergangssysteme zwischen Fahrzeugen - Teil 1:
Hauptanwendungen
Applications ferroviaires - Systèmes d'intercirculation entre véhicules - Partie 1:
Applications générales
Ta slovenski standard je istoveten z: EN 16286-1:2024
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 16286-1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2024
EUROPÄISCHE NORM
ICS 45.060.20 Supersedes EN 16286-1:2013
English Version
Railway applications - Gangway systems between vehicles
- Part 1: Main applications
Applications ferroviaires - Systèmes d'intercirculation Bahnanwendungen - Übergangssysteme zwischen
entre véhicules - Partie 1: Applications générales Fahrzeugen - Teil 1: Hauptanwendungen
This European Standard was approved by CEN on 2 September 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16286-1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
3.1 General definition . 8
3.2 nominal geometric dimensions . 8
3.3 relative movements of the vehicles . 11
3.4 vehicle connection types . 14
3.5 Gangway system . 15
3.6 Typical parts of a gangway system . 15
3.7 types of gangway systems . 16
4 Abbreviated terms . 17
5 General. 17
5.1 Description of the system . 17
5.2 Environmental resistance . 17
6 Vehicle body coordinate system . 17
7 Technical requirements . 18
7.1 General. 18
7.2 Mass . 18
7.3 Geometry . 18
7.3.1 Outer gangway dimensions . 18
7.3.2 Clearway . 18
7.3.3 Clearway for wheelchairs . 19
7.3.4 Length. 20
7.3.5 Steps and ramps . 21
7.4 Relative movements . 22
7.5 Load requirements . 23
7.5.1 Vertical load applied to floor system . 23
7.5.2 Dynamic loads on gangway system and fixation . 23
7.5.3 Horizontal load . 23
7.5.4 Aerodynamic loads . 24
7.5.5 Pressure tightness . 24
7.6 Water tightness. 24
7.7 Crash behaviour . 24
7.8 Earthing . 24
7.9 Vandalism . 24
7.10 Fire protection . 24
7.11 Acoustic requirements . 24
7.12 Thermal insulation . 25
7.13 Lifetime . 25
7.14 Handrails. 25
7.15 Other requirements . 25
8 Interfaces with the vehicle . 25
8.1 General . 25
8.2 Mechanical interfaces . 25
8.3 Adjoining components . 27
8.3.1 General . 27
8.3.2 Inter-vehicle connections . 27
8.3.3 Gangway doors and separating elements . 28
8.3.4 Tail and head lights . 28
9 Testing . 28
9.1 Mass measurement . 28
9.2 Movement test . 28
9.3 Wheelchair and service trolley test . 34
9.4 Pressure tightness test . 34
9.5 Water tightness test . 35
9.6 Acoustic measurements . 35
9.7 Endurance test . 35
10 Maintenance . 36
10.1 General . 36
10.2 Installation . 36
10.3 Operational handling . 36
10.4 Cleaning of a gangway . 36
10.5 Removal of graffiti . 36
10.6 Repair instructions . 36
Annex A (informative) Rubber tube gangways . 37
A.1 General . 37
A.2 Construction requirements . 37
Annex B (informative) Interconnecting gangways for coaches travelling at speeds of up to
200 km/h on high-speed lines with tunnel sections . 42
Annex C (informative) Endurance test parameters and test criteria . 43
C.1 General . 43
C.2 Pass/fail criteria . 44
Annex ZA (informative) Relationship between this European Standard and the Essential
requireme
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.