SIST EN ISO 30023:2021
(Main)Textiles - Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2021)
Textiles - Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2021)
This document
— establishes a system of graphical symbols, intended for use in the marking of workwear articles and
protective clothing providing information on the suitability for professional industrial laundering
using ISO 15797, and
— specifies the use of these symbols in qualifying garments as potentially suitable for industrial
laundering.
The following professional industrial laundering treatments are covered: washing, bleaching, tunnel
finishing and tumble drying after washing. Textile-care treatments in dry and wet cleaning are covered
in ISO 3175 (all parts).
This document applies to articles of workwear and protective clothing in the form in which they are
supplied to the professional launderer.
Textilien - Qualifizierungssymbole zur Kennzeichnung von Arbeitsbekleidung für die industrielle Wäsche (ISO 30023:2021)
Dieses Dokument
- stellt ein System von graphischen Symbolen zur Verfügung, die für die Kennzeichnung von Arbeits- und Schutzbekleidung mit Informationen in Bezug auf die Eignung für die professionelle Industriewäsche unter Verwendung von ISO 15797 ist, und
- legt die Verwendung dieser Symbole durch Qualifizierung der Bekleidung als für die Industriewäsche möglicherweise geeignet fest.
Die nachfolgenden Behandlungen der professionellen Industriewäsche beinhalten: Waschen, Bleichen, Tunnelfinishen und Trocknen im Trommeltrockner nach dem Waschen. Durch ISO 3175 (alle Teile) werden textile Pflegebehandlungen beim Chemisch und Nassreinigen abgedeckt.
Dieses Dokument ist anzuwenden für Arbeits- oder Schutzbekleidung in der Art, wie sie der professionellen Wäscherei zur Verfügung gestellt wird.
Textiles - Symboles de qualification pour l'étiquetage des vêtements de travail destinés à être lavés de manière industrielle (ISO 30023:2021)
Le présent document:
— établit un système de symboles graphiques destinés au marquage des vêtements de travail et de protection en donnant des informations sur l’aptitude à être soumis à un blanchissage industriel professionnel selon l’ISO 15797, et
— spécifie l’utilisation de ces symboles pour qualifier les vêtements comme potentiellement appropriés au blanchissage industriel.
Les traitements de blanchissage industriel professionnel suivants sont concernés: lavage, blanchiment, finition en tunnel et séchage en tambour après lavage. Les traitements d’entretien des textiles en nettoyage à sec et nettoyage à l’eau sont traités dans l’ISO 3175 (toutes les parties).
Le présent document s’applique aux vêtements de travail et de protection sous la forme sous laquelle ils sont remis à la blanchisserie professionnelle.
Tekstilije - Kvalifikacijski simboli za označevanje delovnih oblek, namenjenih za industrijsko pranje (ISO 30023:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 30023:2021
01-november-2021
Nadomešča:
SIST EN ISO 30023:2012
Tekstilije - Kvalifikacijski simboli za označevanje delovnih oblek, namenjenih za
industrijsko pranje (ISO 30023:2021)
Textiles - Qualification symbols for labelling workwear to be industrially laundered (ISO
30023:2021)
Textilien - Qualifizierungssymbole zur Kennzeichnung von Arbeitsbekleidung für die
industrielle Wäsche (ISO 30023:2021)
Textiles - Symboles de qualification pour l'étiquetage des vêtements de travail destinés à
être lavés de manière industrielle (ISO 30023:2021)
Ta slovenski standard je istoveten z: EN ISO 30023:2021
ICS:
01.075 Simboli za znake Character symbols
59.080.01 Tekstilije na splošno Textiles in general
SIST EN ISO 30023:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 30023:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 30023:2021
EN ISO 30023
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2021
EUROPÄISCHE NORM
ICS 59.080.01 Supersedes EN ISO 30023:2012
English Version
Textiles - Qualification symbols for labelling workwear to
be industrially laundered (ISO 30023:2021)
Textiles - Symboles de qualification pour l'étiquetage Textilien - Qualifizierungssymbole zur Kennzeichnung
des vêtements de travail destinés à être lavés de von Arbeitsbekleidung für die industrielle Wäsche (ISO
manière industrielle (ISO 30023:2021) 30023:2021)
This European Standard was approved by CEN on 28 August 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 30023:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 30023:2021
EN ISO 30023:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 30023:2021
EN ISO 30023:2021 (E)
European foreword
This document (EN ISO 30023:2021) has been prepared by Technical Committee ISO/TC 38 "Textiles"
in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2022, and conflicting national standards shall
be withdrawn at the latest by March 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 30023:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 30023:2021 has been approved by CEN as EN ISO 30023:2021 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 30023:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 30023:2021
INTERNATIONAL ISO
STANDARD 30023
Second edition
2021-08
Textiles — Qualification symbols for
labelling workwear to be industrially
laundered
Textiles — Symboles de qualification pour l'étiquetage des vêtements
de travail destinés à être lavés de manière industrielle
Reference number
ISO 30023:2021(E)
©
ISO 2021
---------------------- Page: 7 ----------------------
SIST EN ISO 30023:2021
ISO 30023:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 30023:2021
ISO 30023:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Description and specification of symbols . 3
4.1 Professional industrial laundering . 3
4.2 Washing . 3
4.3 Drying . 4
4.3.1 Tumble drying . 4
4.3.2 Tunnel/cabinet finishing . 4
4.4 Examples of complete labels . 4
5 Application and use of symbols . 5
5.1 Application of symbols . 5
5.2 Characteristics and test methods for the selection of appropriate symbols . 6
5.3 Use of symbols . 6
Annex A (informative) Characteristics and available test methodsfor the correct selection
of symbols to indicate potential suitabilityfor professional industrial laundering .7
Bibliography . 9
© ISO 2021 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 30023:2021
ISO 30023:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing,
finishing and water resistance tests, in collaboration with the European Committee for Standardization
(CEN) Technical Committee CEN/TC 248, Textiles and textile products, in accordance with the agreement
on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 30023:2010), of which it constitutes a
minor revision. The changes compared to the previous edition are as follows:
— Table 1 has been redesigned in accordance with the latest edition of ISO 15797, to enable precise
referencing in the assignment of the washing processes of this document.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 30023:2021
ISO 30023:2021(E)
Introduction
ISO 15797 was developed to assist manufacturers, suppliers and launderers to assess and specify
workwear garments for use in the textile rental industry. ISO 15797 also had an application in the
emerging personal protective equipment (PPE) clothing market.
While ISO 15797 made a significant beneficial impact on the industry, there was still a requirement to
supply information in a clear but uncomplicated way down an often-extended chain to the launderer.
A labelling code using symbols (see ISO 3758) has been successfully used for this purpose by the retail
textile industry for many years and has, by and large, proved to be a success for textile producers,
retailers, detergent suppliers, professional dry and wet cleaners and, of course, the customer who
launders the products at home.
No such labelling code existed for the professional laundry sector. This document provides an
equivalent, but visually distinctly different, code of symbols for the professional industrial laundering
of workwear and protective clothing.
© ISO 2021 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 30023:2021
---------------------- Page: 12 ----------------------
SIST EN ISO 30023:2021
INTERNATIONAL STANDARD ISO 30023:2021(E)
Textiles — Qualification symbols for labelling workwear to
be industrially laundered
1 Scope
This document
— establishes a system of graphical symbols, intended for use in the marking of workwear articles and
protective clothing providing information on the suitability for professional industrial laundering
using ISO 15797, and
— specifies the use of these symbols in qualifying garments as potentially suitable for industrial
laundering.
The following professional industrial laundering treatments are covered: washing, bleaching, tunnel
finishing and tumble drying after washing. Textile-care treatments in dry and wet cleaning are covered
in ISO 3175 (all parts).
This document applies to articles of workwear and protective clothing in the form in which they are
supplied to the professional lau
...
SLOVENSKI STANDARD
oSIST prEN ISO 30023:2021
01-julij-2021
Tekstilije - Kvalifikacijski simboli za označevanje delovnih oblek, namenjenih za
industrijsko pranje (ISO/FDIS 30023:2021)
Textiles - Qualification symbols for labelling workwear to be industrially laundered
(ISO/FDIS 30023:2021)
Textilien - Qualifizierungssymbole zur Kennzeichnung von Arbeitsbekleidung für die
industrielle Wäsche (ISO/FDIS 30023:2021)
Textiles - Symboles de qualification pour l'étiquetage des vêtements de travail destinés à
être lavés de manière industrielle (ISO/FDIS 30023:2021)
Ta slovenski standard je istoveten z: prEN ISO 30023
ICS:
01.075 Simboli za znake Character symbols
59.080.01 Tekstilije na splošno Textiles in general
oSIST prEN ISO 30023:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 30023:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 30023:2021
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 30023
ISO/TC 38/SC 2
Textiles — Qualification symbols for
Secretariat: SAC
labelling workwear to be industrially
Voting begins on:
20210504 laundered
Voting terminates on:
Textiles — Symboles de qualification pour l'étiquetage des vêtements
20210727
de travail destinés à être lavés de manière industrielle
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/FDIS 30023:2021(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 30023:2021
ISO/FDIS 30023:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 30023:2021
ISO/FDIS 30023:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Description and definition of symbols . 3
4.1 Professional industrial laundering . 3
4.2 Washing . 3
4.3 Drying . 4
4.3.1 Tumble drying . 4
4.3.2 Tunnel/cabinet finishing . 4
4.4 Examples of complete labels . 4
5 Application and use of symbols . 5
5.1 Application of symbols . 5
5.2 Characteristics and test methods for the selection of appropriate symbols . 6
5.3 Use of symbols . 6
Annex A (informative) Characteristics and available test methodsfor the correct selection
of symbols to indicate potential suitabilityfor professional industrial laundering .7
Bibliography . 9
© ISO 2021 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 30023:2021
ISO/FDIS 30023:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and nongovernmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing,
finishing and water resistance tests, in collaboration with the European Committee for Standardization
(CEN) Technical Committee CEN/TC 248, Textiles and textile products, in accordance with the agreement
on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 30023:2010), of which it constitutes a
minor revision. The changes compared to the previous edition are as follows:
— Table 1 has been redesigned in accordance with the latest edition of ISO 15797, to enable precise
referencing in the assignment of the washing processes of this document.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 30023:2021
ISO/FDIS 30023:2021(E)
Introduction
ISO 15797 was developed to assist manufacturers, suppliers and launderers to assess and specify
workwear garments for use in the textile rental industry. ISO 15797 also had an application in the
emerging personal protective equipment (PPE) clothing market.
While ISO 15797 made a significant beneficial impact on the industry, there was still a requirement to
supply information in a clear but uncomplicated way down an often-extended chain to the launderer.
A labelling code using symbols (see ISO 3758) has been successfully used for this purpose by the retail
textile industry for many years and has, by and large, proved to be a success for textile producers,
retailers, detergent suppliers, professional dry and wet cleaners and, of course, the customer who
launders the products at home.
No such labelling code existed for the professional laundry sector. This document provides an
equivalent, but visually distinctly different, code of symbols for the professional industrial laundering
of workwear and protective clothing.
© ISO 2021 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 30023:2021
---------------------- Page: 8 ----------------------
oSIST prEN ISO 30023:2021
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 30023:2021(E)
Textiles — Qualification symbols for labelling workwear to
be industrially laundered
1 Scope
This document
— establishes a system of graphical symbols, intended for use in the marking of workwear articles and
protective clothing providing information on the suitability for professional industrial laundering
using ISO 15797, and
— specifies the use of these symbols in qualifying garments as potentially suitable for industrial
laundering.
The following professional industrial laundering treatments are covered: washing, bleaching, tunnel
finishing and tumble drying after washing. Textile-care treatments in dry and wet cleaning are covered
in ISO 3175 (all parts).
This document applies to articles of workwear and protective clothing in the form in which they are
supplied to the professional launderer.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 15797:2017, Textiles — Industrial washing and finishing procedures for testing of workwear
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
drying
finishing
process carried out on workwear and protective-clothing articles after washing and extraction in order
to remove excess water, remove creases and restore the shape
3.1.1
tumble drying
process carried out on an article of workwear and protective clothing after washing and extracting,
with the intention of removing residual water by treatment with hot air in a rotating drum
© ISO 2021 – All rights reserved 1
---------------------- Page: 9 ----------------------
oSIST prEN ISO 30023:2021
ISO/FDIS 30023:2021(E)
3.1.2
tunnel finishing
cabinet finishing
process carried out on an article of workwear and protective clothing after washing and extracting,
with the intention of removing residual water and restoring its shape and appearance
Note 1 to entry: An appropriate appliance consists of a conveyor system that transports garments on hangers
through a cabinet or tunnel equipped with suitable steam and air jets for providing moisture, heat and turbulence.
3.2
profess
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.