SIST EN 1323:2007

Adhesives for tiles - Concrete slabs for tests

This European Standard specifies the substrate (concrete slab) to be used for the determination of the properties of adhesives for tiles.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.

Mörtel und Klebstoffe für Fliesen und Platten - Betonplatten für Prüfungen

Diese Europäische Norm legt den Untergrund (Betonplatte) fest, der zur Bestimmung der Eigenschaften von Mörteln und Klebstoffen für Fliesen und Platten zu verwenden ist.
In dieser Europäischen Norm sind keine Leistungsanforderungen oder Empfehlungen für die Ausführung und Verarbeitung von keramischen Fliesen und Platten enthalten.
ANMERKUNG   Mörtel und Klebstoffe für keramische Fliesen und Platten können auch für andere Arten von Fliesen und Platten (Naturwerkstein, Betonwerkstein usw.) verwendet werden, wenn diese Materialien hierdurch nicht beeinträchtigt werden

Colles a carrelage - Plaques de béton pour essais

La présente Norme européenne spécifie le support (plaque de béton) devant être utilisé pour déterminer les propriétés des colles à carrelage.
La présente Norme européenne ne contient pas d’exigences de performance, ni de recommandations pour la conception et la pose des carreaux céramiques.
NOTE   Les colles pour carreaux céramiques peuvent également être utilisées pour d’autres types de carrelages (carreaux de pierres naturelles ou de pierres reconstituées etc.) lorsqu’elles sont compatibles.

Lepila za ploščice - Betonska plošča za preskus

General Information

• Status: Withdrawn
• Publication Date: 14-May-2007
• Withdrawal Date: 03-Apr-2017
• ICS: 83.180 - Adhesives
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: IKER - Ceramics
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 04-Apr-2017
• Due Date: 27-Apr-2017
• Completion Date: 04-Apr-2017
• Ref Project: EN 1323:2007 - Adhesives for tiles - Concrete slabs for tests

Relations

• Replaces: SIST EN 1323:1998 - Adhesives for tiles - Concrete slab for test
• Effective Date: 01-Oct-2007
• Replaces: SIST EN 1323:1998/A1:2000 - Adhesives for tiles - Concrete slab for test
• Effective Date: 01-Oct-2007
• Replaced By: SIST EN 12004-2:2017 - Adhesives for tiles - Part 2: Test methods
• Effective Date: 01-May-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Adhesives for tiles - Concrete slabs for testsColles a carrelage - Plaques de béton pour essaisMörtel und Klebstoffe für Fliesen und Platten - Betonplatten für PrüfungenTa slovenski standard je istoveten z:EN 1323:2007SIST EN 1323:2007en,fr,de91.100.3091.100.1083.180ICS:SIST EN 1323:1998/A1:2000SIST EN 1323:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 1323:200701-december-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1323August 2007ICS 83.180; 91.100.10; 91.100.30Supersedes EN 1323:1996
English VersionAdhesives for tiles - Concrete slabs for testsColles à carrelage - Plaques de béton pour essaisMörtel und Klebstoffe für Fliesen und Platten - Betonplattenfür PrüfungenThis European Standard was approved by CEN on 21 January 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1323:2007: E



EN 1323:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Test conditions.4 4 Apparatus.4 4.1 Pull-head plates.4 4.2 Tensile testing machine.4 4.3 Carsten-Röhrchen flask.4 5 Concrete slab.4 5.1 Specification.4 5.2 Manufacture of the concrete slab.5 5.3 Conditioning of the concrete slab.5 5.4 Water absorption at the surface.5 6 Test report.6



EN 1323:2007 (E) 3 Foreword This document (EN 1323:2007) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn at the latest by February 2008. This document supersedes EN 1323:1996. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swe
...