oSIST prEN 1995-2:2023

Eurocode 5 - Design of timber structures - Part 2: Bridges

(1) EN 1995-2 gives general design rules for the structural parts of bridges, i.e. structural members of importance for the reliability of the whole bridge or major parts of it, made of timber or other wood-based materials, either singly or compositely with concrete, steel or other materials.

Eurocode 5 - Bemessung und Konstruktion von Holzbauten - Teil 2: Brücken

Eurocode 5 - Calcul des structures en bois - Partie 2 : Ponts

1.1   Domaine d'application de l'EN 1995 2
(1) Le présent document donne les règles générales de calcul des composants structuraux des ponts, par exemple les éléments porteurs conditionnant la fiabilité du pont ou de ses parties principales, qu'ils soient en bois ou autres matériaux à base de bois, utilisés isolément ou en association avec du béton, du métal ou tous autres matériaux.
1.2   Hypothèses
(1) Les hypothèses générales données dans l'EN 1990 s'appliquent.
(2) L'EN 1995 2 est destiné à être utilisé conjointement avec l'EN 1990, l'EN 1991 (toutes les parties), l'EN 1995 (toutes les parties), la norme CEN/TS 19103, l'EN 1997 (toutes les parties) et l'EN 1998 2.
(3) Les règles concernant les éléments mixtes bois-béton précontraints ne sont pas couvertes par le présent document. Les règles de calcul des tabliers en bois lamellé précontraint utilisés dans le cadre d'un système mixte bois-béton sont indiquées.
(4) Les systèmes qui reposent sur le frottement entre le bois et le béton ne sont pas couverts par le présent document, à l'exception des tabliers en bois lamellé précontraint.

Evrokod 5 - Projektiranje lesenih konstrukcij - 2. del: Mostovi

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Dec-2023
• ICS: 91.010.30 - Technical aspects
• ICS: 91.080.20 - Timber structures
• ICS: 93.040 - Bridge construction
• Technical Committee: KON - Structures
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 09-Oct-2023
• Due Date: 26-Feb-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/515 - Mandate for amending existing Eurocodes and extending the scope of structural Eurocodes
• Ref Project: prEN 1995-2 - Eurocode 5 - Design of timber structures - Part 2: Bridges

Relations

• Revises: SIST EN 1995-2:2005 - Eurocode 5: Design of timber structures - Part 2: Bridges
• Effective Date: 31-Jul-2019

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 1995-2:2023
01-december-2023
Evrokod 5 - Projektiranje lesenih konstrukcij - 2. del: Mostovi
Eurocode 5 - Design of timber structures - Part 2: Bridges
Eurocode 5 - Bemessung und Konstruktion von Holzbauten - Teil 2: Brücken
Eurocode 5 - Calcul des structures en bois - Partie 2 : Ponts
Ta slovenski standard je istoveten z: prEN 1995-2
ICS:
91.010.30 Tehnični vidiki Technical aspects
91.080.20 Lesene konstrukcije Timber structures
93.040 Gradnja mostov Bridge construction
oSIST prEN 1995-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1995-2:2023

---------------------- Page: 2 ----------------------
oSIST prEN 1995-2:2023


DRAFT
EUROPEAN STANDARD
prEN 1995-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2023
ICS 93.040; 91.010.30; 91.080.20 Will supersede EN 1995-2:2004
English Version

Eurocode 5 - Design of timber structures - Part 2: Bridges
Eurocode 5 - Calcul des structures en bois - Part 2: Eurocode 5 - Bemessung und Konstruktion von
Ponts Holzbauten - Teil 2: Brücken
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 250.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1995-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1995-2:2023
prEN 1995-2:2023(E)
Contents Page

European foreword . 5
Introduction . 6
1 Scope . 9
1.1 Scope of EN 1995-2 . 9
1.2 Assumptions . 9
2 Normative references . 9
3 Terms, definitions, symbols and abbreviations . 10
3.1 Terms and definitions . 10
3.2 Symbols and abbreviations . 15
3.2.1 Latin upper case letters . 15
3.2.2 Latin lower case letters . 16
3.2.3 Greek upper case letters . 17
3.2.4 Greek lower case letters .
...