iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1348:1998

(Main)

Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

This European Standard specifies the test method for the determination of the tensile adhesion strength of cementitious ceramic tile adhesives. This method applies to all cementitious adhesives and cementitious adhesives with separate components for internal and external ceramic tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles

Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Haftfestigkeit zementhaltiger Mörtel für innen und außen

Diese Europäische Norm beschreibt die Prüfmethode zur Beurteilung der Haftfestigkeit von zementhaltigen Mörteln. Diese Norm gilt für alle zementhaltigen Mörtel für die Verarbeitung keramischer Fliesen und Platten an Wand und Boden, für innen und aussen: zementhaltige Mörtel ohne und mit zusätzlichen Beimischungen. Diese Europäische Norm enthält keine Anforderungen und keine Empfehlungen für die Verarbeitung von keramischen Fliesen und Platten.

Colles a carrelage - Détermination de l'adhérence par traction des mortiers-colles

Cette norme européenne définit la méthode d'essai a utiliser pour évaluer l'adhérence par résistance a l'arrachement des mortiers-colles a base de liants hydrauliques. Elle s'applique a tous les mortiers-colles a carrelage pour les applications en murs ou en sols, et sur les ouvrages intérieurs ou extérieurs. Cette norme européenne ne concerne pas les spécifications et ne constitue pas des recommandations pour la conception ou l'installation de revetements céramiques.

Lepila za ploščice - Ugotavljanje natezne adhezijske trdnosti cementnih lepil

General Information

Status
Withdrawn
Publication Date
31-Mar-1998
Withdrawal Date
06-Nov-2007
ICS
83.180 - Adhesives
91.100.10 - Cement. Gypsum. Lime. Mortar
Technical Committee
IKER - Ceramics
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
05-Nov-2007
Due Date
28-Nov-2007
Completion Date
07-Nov-2007
Directive
89/106/EEC - Construction products
Mandate
M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
M/127 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on construction adhesives
M/BC/CEN/92/22 - CPD: Internal finishes of walls & partitions.
Ref Project
EN 1348:1997 - Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

Relations

Amended By
SIST EN 1348:1998/A1:2000 - Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
Effective Date
22-Dec-2008
Replaced By
SIST EN 1348:2007 - Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
Effective Date
01-Dec-2007

Buy Standard

EN 1348:1998EN 1348:1998
PreviousNext
Standard
EN 1348:1998
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1348:1998
01-april-1998
HQWQLKOHSLO/HSLOD]DSORãþLFH8JRWDYOMDQMHQDWH]QHDGKH]LMVNHWUGQRVWLFHP
Adhesives for tiles - Determination of tensile adhesion strength for cementitious
adhesives
Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Haftfestigkeit
zementhaltiger Mörtel für innen und außen
Colles a carrelage - Détermination d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12004-1:2017(Main)
Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking
EN 12004-1:2017

This European Standard is applicable to ceramic tile cementitious adhesives, dispersion adhesives and reaction resin adhesives for internal and external tile installations on walls and floors.
This standard gives the terminology concerning the products, working methods, application properties, etc, for ceramic tile adhesives.
This European Standard specifies the values of performance requirements for ceramic tile adhesives (cementitious, dispersion and reaction resin adhesives).
This European Standard does not provide criteria or recommendations for the design and installation of ceramic tiles.
NOTE    Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12004-3:2022(Main)
Adhesives for ceramic tiles - Part 3: Terminology, specifications, designation and marking
prEN 12004-3

This document specifies the additional characteristics for the adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document provides the terminology concerning the products, working methods, application properties, etc., for ceramic tile adhesives.
This document does not provide criteria or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives are also used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN 12004-1:2020(Main)
Adhesives for ceramic tiles - Part 1: Essential characteristics and AVCP
FprEN 12004-1

This document is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document specifies the essential characteristics and the respective threshold levels of the adhesives for ceramic tiles.
It also specifies the appurtenant test methods and the assessment and verification of constancy of performance (AVCP).
NOTE   This document does not provide criteria or recommendations for the design and installation of ceramic tiles.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14496:2017(Main)
Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods
EN 14496:2017

This European standard specifies the characteristics and performances of gypsum based adhesives which are composed of gypsum plasters defined in EN 13279 1 and of additives. These adhesives are used for fixing to walls and partitions, gypsum board thermal/acoustic insulation composite panels according to EN 13950, gypsum plasterboard linings according to EN 520, gypsum boards with mat reinforcement according to EN 15283 1, gypsum fibre boards according to EN 15283 2 and other suitable products as reprocessed boards according to EN 14190 and cornices according to EN 14209. They assist in the construction of systems which provide thermal and acoustic performance.
It covers the following performance characteristics: reaction to fire, fire resistance and bond strength to be measured according to the corresponding European test methods.
It provides the assessment and verification of constancy of performance of the products.”
This standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction Industry and the reference tests for these characteristics.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12004-1:2017(Main)
Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking
EN 12004-1:2017

This European Standard is applicable to ceramic tile cementitious adhesives, dispersion adhesives and reaction resin adhesives for internal and external tile installations on walls and floors.
This standard gives the terminology concerning the products, working methods, application properties, etc, for ceramic tile adhesives.
This European Standard specifies the values of performance requirements for ceramic tile adhesives (cementitious, dispersion and reaction resin adhesives).
This European Standard does not provide criteria or recommendations for the design and installation of ceramic tiles.
NOTE    Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12860:2002/AC:2004(Amendment)
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
EN 12860:2001/AC:2002

2009-10-01: OD Citation flagged following request by ADC
TC - Some corrections in Table 1 and Annex Z

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12860:2002(Main)
Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
EN 12860:2001

This European Standard specifies the characteristics and performance of gypsum based adhesives used for assembling gypsum blocks or other gypsum units. It covers the following performance characteristics related to the essential requirements :
- reaction to fire ;
- release of dangerous substances ;
measured according to the corresponding European test methods.
It defines the reference tests for technical specifications.
It provides for the evaluation of conformity of the product to this European Standard.
This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Building Industry :
- direct airborne sound insulation ;
- bond strength ;
- thermal resistance calculated with thermal conductivity values from the Table 1 (see 5.3.2).

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12004-3:2022(Main)
Adhesives for ceramic tiles - Part 3: Terminology, specifications, designation and marking
prEN 12004-3

This document specifies the additional characteristics for the adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document provides the terminology concerning the products, working methods, application properties, etc., for ceramic tile adhesives.
This document does not provide criteria or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives are also used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN 12004-1:2020(Main)
Adhesives for ceramic tiles - Part 1: Essential characteristics and AVCP
FprEN 12004-1

This document is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document specifies the essential characteristics and the respective threshold levels of the adhesives for ceramic tiles.
It also specifies the appurtenant test methods and the assessment and verification of constancy of performance (AVCP).
NOTE   This document does not provide criteria or recommendations for the design and installation of ceramic tiles.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day