SIST EN 50514:2009
(Main)Audio, video and information technology equipment - Routine electrical safety testing in production
Audio, video and information technology equipment - Routine electrical safety testing in production
Concepts, safety requirements and tests as references to EN 60950 are given for equipment to be connected to telecommunication networks in order to reconcile the relevant equipment safety standards with the considerable safety requirements of telecommunication network operators for the operation of their networks.
Audio- und Video-Geräte und Einrichtungen der Informationstechnik – Stückprüfungen der elektrischen Sicherheit in der Fertigung
Diese Europäische Norm legt Verfahren für stückprüfungen für die Anwendung während oder nach der Fertigung vollständiger Einrichtungen, Baugruppen oder Komponenten fest, die nach EN 60065 oder EN 60950-1 zertifiziert werden oder deren Übereinstimmung bescheinigt wird und die aus einer Wechsel- oder Gleichstromversorgungseinheit gespeist werden. Sie legt die STÜCKPRÜFUNGEN in Bezug auf elektrische Sicherheit sowie deren Verfahren für die Anwendung während oder nach dem Fertigung der Geräte fest, die nach EN 60065 oder EN 60950-1 zertifiziert werden oder deren Übereinstimmung bescheinigt wird. Die Anwendung der in dieser Europäischen Norm festgelegten Prüfverfahren ist konstruktionsabhängig und muss vom Hersteller festgelegt werden.
Appareils audio, vidéo et matériel de traitement de l'information - Essais individuels de série, en production, pour la vérification de la sécurité électrique
La présente Norme Européenne définit les procédures d’essais individuels de série à réaliser en cours ou en fin de fabrication pour des équipements complets, des sous-ensembles ou des composants, certifiés ou déclarés conformes à la EN 60065 ou à la EN 60950 1 et qui sont alimentés en courant alternatif ou continu. Elle définit les ESSAIS INDIVIDUELS DE SERIE POUR LA SECURITE ELECTRIQUE et leurs procédures à appliquer au cours ou à la fin du processus de fabrication des appareils certifiés ou déclarés conformes à la EN 60065 ou à la EN 60950-1. L’application des essais décrits dans la présente Norme Européenne est dépendante de la conception des équipements et doit être définie par le fabricant.
Oprema za avdio, video in informacijsko tehnologijo - Redno preskušanje električne varnosti v proizvodnji
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.XãDQMHAudio- und Video-Geräte und Einrichtungen der Informationstechnik – Stückprüfungen der elektrischen Sicherheit in der FertigungAppareils audio, vidéo et matériel de traitement de l'information - Essais individuels de série, en production, pour la vérification de la sécurité électriqueAudio, video and information technology equipment - Routine electrical safety testing in production35.020Informacijska tehnika in tehnologija na splošnoInformation technology (IT) in general33.160.01Avdio, video in avdiovizualni sistemi na splošnoAudio, video and audiovisual systems in general19.080SUHVNXãDQMHElectrical and electronic testingICS:Ta slovenski standard je istoveten z:EN 50514:2008SIST EN 50514:2009en,de01-januar-2009SIST EN 50514:2009SLOVENSKI
STANDARDSIST EN 50333:2002SIST EN 50116:20071DGRPHãþD
EUROPEAN STANDARD EN 50514 NORME EUROPÉENNE
EUROPÄISCHE NORM November 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50514:2008 E
ICS 33.160.01 Supersedes EN 50116:2006 and EN 50333:2001
English version
Audio, video and information technology equipment -
Routine electrical safety testing in production
Appareils audio, vidéo et
matériel de traitement de l'information -
Essais individuels de série,
en production, pour la vérification
de la sécurité électrique
Audio- und Video- Geräte und Einrichtungen der Informationstechnik -
Stückprüfungen der elektrischen Sicherheit in der Fertigung
This European Standard was approved by CENELEC on 2008-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50514 on 2008-07-01. This European Standard supersedes EN 50116:2006 and EN 50333:2001; it is a combination of the current requirements in EN 50116 and EN 50333. No new requirements were added that were not part of these standards. The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2009-07-01 – latest date by which the national standards conflicting with the EN have to be withdrawn
(dow)
2011-07-01 This European Standard applies to equipment that complies with EN 60065 or EN 60950-1. Most of the tests specified in those standards are TYPE TESTS. For ROUTINE TESTS, to be carried out during or after manufacture, TYPE TESTS may not be suitable. Nevertheless it is recognized that some tests are necessary in order to guarantee an acceptable level of safety.
This European Standard defines ROUTINE TESTS to measure the resistance of the earthing path and to check the insulation between the PRIMARY CIRCUIT and accessible conductive parts. In addition, this European Standard defines the documentation to be maintained by the manufacturer in respect of these tests.
This standard is complementary to the product safety standards (EN 60065 or EN 60950-1) and is to be considered only as a tool for voluntary application by manufacturers. This European Standard can be used in association with Permanent Document CIG 021, Factory inspection procedures - Harmonised requirements, of the European Electrical Products Certification Association. Permanent Document CIG 021 can be obtained from signatory bodies (certification bodies). In this European Standard, the following print types are used: - normative text: roman type; - test specifications: italic type; - terms which are defined in EN 60065 or EN 60950-1: SMALL CAPITALS. __________ SIST EN 50514:2009
– 3 – EN 50514:2008 Contents 1 Scope . 4 2 Normative references . 4 3 Definitions . 4 4 Conformance . 4 5 Routine tests . 5 5.1 Resistance of protective earthing paths . 5 5.2 Electric strength test . 5 6 Records of tests . 6
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.