SIST EN 61851-24:2014/AC:2015

Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging

Konduktive Ladesysteme für Elektrofahrzeuge - Teil 24: Digitale Kommunikation zwischen einer Gleichstromladestation für Elektrofahrzeuge und dem Elektrofahrzeug zur Steuerung des Gleichstromladevorgangs

Système de charge conductive pour véhicules électriques - Partie 24: Communication digitale entre la borne de charge à courant continu et le véhicule électrique pour le contrôle de la charge à courant continu

Sistem kabelskega napajanja električnih vozil - 24. del: Digitalna komunikacija med enosmerno (d.c.) EV-napajalno postajo in električnim vozilom za krmiljenje enosmernega (d.c.) napajanja - Popravek AC

General Information

• Status: Published
• Publication Date: 06-Aug-2015
• ICS: 43.120 - Electric road vehicles
• Technical Committee: CEV - Electric passenger and commercial vehicles
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 08-Jul-2015
• Due Date: 12-Sep-2015
• Completion Date: 07-Aug-2015
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/468 - Standardisation mandate addressed to CEN and CENELEC and ETSI concerning the charging of electric vehicles
• Ref Project: EN 61851-24:2014/AC:2015 - Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging

Relations

• Corrects: SIST EN 61851-24:2014 - Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
• Effective Date: 01-Sep-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UPLOMHQMHKonduktive Ladesysteme für Elektrofahrzeuge - Teil 24: Digitale Kommunikation zwischen einer Gleichstromladestation für Elektrofahrzeuge und dem Elektrofahrzeug zur Steuerung des GleichstromladevorgangsSystème de charge conductive pour véhicules électriques - Partie 24: Communication digitale entre la borne de charge à courant continu et le véhicule électrique pour le contrôle de la charge à courant continuElectric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging43.120Electric road vehiclesICS:Ta slovenski standard je istoveten z:EN 61851-24:2014/AC:2015SIST EN 61851-24:2014/AC:2015en01-september-2015SIST EN 61851-24:2014/AC:2015SLOVENSKI
STANDARD
IEC 61851-24:2014/COR1:2015 – 1 –
© IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE ____________
IEC 61851-24 Edition 1.0
2014-03
ELECTRIC VEHICLE CONDUCTIVE
CHARGING SYSTEM –
Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging IEC 61851-24 Édition 1.0
2014-03
SYSTÈME DE CHARGE CONDUCTIVE POUR VÉHICULES ÉLECTRIQUES –
Partie 24: Communication digitale entre la borne de charge à courant continu et le véhicule électrique pour le contrôle de la charge
à courant continu
CORRIGENDUM 1
Corrections to the French version appear after the English text. Les corrections à la version française sont données après le texte anglais.
Normative references Add the footnote "1
To be published.". 3.2
parameter This correction applies to the French text only. 5 Digital communication architecture This correction applies to the French text only.
Table A.1 – Communication actions and parameters during d.c. charging control process between system A station and vehicle This correction applies to the French text only. Figure A.1 – Sequence diagram of d.c. charging control communication for system A
Replace "less than 10 V" by "10 V or less". Replace "less than 20 V" by "20 V or less". Replace "less than 5 A" by "5 A or less". As follows:
IEC 61851-24:2014/COR1:2015(en-fr)
– 2 – IEC 61851-24:2014/COR1:2015
© IEC 2015Start request Transmit "Charging Start (CP)" signal
Process the information for charge control before charging (battery compatibility, charging time calculation etc.) Lock vehicle connector Check the termination of isolation test (Voltage of d.c. power line is 20 V or less) Transmit "Charging Start (CP2)" signal
Receive "Charging Start (CP)" signal
Process the information for charge control before charging (on-board battery information, maximum charging time etc.) Transmit the signal and parameter of vehicle setup completion Transmit "Charging Current Request" Charging completed
Transmit the signal and parameter of charging stop request Stop charging Close EV contactors 'c'
Open EV contactors 'c' Start charging current output Check that voltage of d.c. power line is
10 V or less Unlock vehicle connector Terminate digital communication Terminate digital communicatio
...