SIST EN ISO 28721-4:2014
(Main)Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings (ISO 28721-4:2010)
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings (ISO 28721-4:2010)
This part of ISO 28721 specifies the quality requirements for glass-lined flanged steel pipes and flanged steel fittings used for process plants.
Emails und Emaillierungen - Emaillierte Apparate für verfahrenstechnische Anlagen - Teil 4: Qualitätsanforderungen an Flansch-Rohre und Flansch-Formstücke aus Stahl mit Emaillierung (ISO 28721-4:2010)
Dieser Teil von ISO 28721 legt die Qualitätsanforderungen an in verfahrenstechnischen Anlagen eingesetzte Flansch-Rohre und Flansch-Formstücke aus Stahl mit Emaillierung fest.
Émaux vitrifiés - Appareils émaillés pour les installations industrielles - Partie 4: Exigences de qualité pour les tubes et raccords à brides en acier émaillé (ISO 28721-4:2010)
L'ISO 28721-4:2010 définit les exigences de qualité relatives aux tubes et raccords à brides en acier émaillé utilisés dans les installations industrielles.
Steklasti in keramični emajli - Emajlirane naprave za procesno opremo - 4. del: Zahteve za kakovost emajliranih jeklenih cevi s prirobnico in jeklene armature s prirobnico (ISO 28721-4:2010)
Ta del standarda ISO 28721 navaja zahteve za kakovost emajliranih jeklenih cevi s prirobnico in jeklenih armatur s prirobnico, ki se uporabljajo v procesnih obratih.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Emails und Emaillierungen - Emaillierte Apparate für verfahrenstechnische Anlagen - Teil 4: Qualitätsanforderungen an Flansch-Rohre und Flansch-Formstücke aus Stahl mit Emaillierung (ISO 28721-4:2010)Émaux vitrifiés - Appareils émaillés pour les installations industrielles - Partie 4: Exigences de qualité pour les tubes et raccords à brides en acier émaillé (ISO 28721-4:2010)Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings (ISO 28721-4:2010)25.220.50Emajlne prevlekeEnamels23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and jointsICS:Ta slovenski standard je istoveten z:EN ISO 28721-4:2012SIST EN ISO 28721-4:2014en01-julij-2014SIST EN ISO 28721-4:2014SLOVENSKI
STANDARDSIST EN 15711:20091DGRPHãþD
SIST EN ISO 28721-4:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 28721-4
December 2012 ICS 25.220.50 Supersedes EN 15711:2009English Version
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings (ISO 28721-4:2010) Émaux vitrifiés - Appareils émaillés pour les installations industrielles - Partie 4: Exigences de qualité pour les tubes et raccords à brides en acier émaillé (ISO 28721-4:2010)
Emails und Emaillierungen - Emaillierte Apparate für verfahrenstechnische Anlagen - Teil 4: Qualitätsanforderungen an Flansch-Rohre und Flansch-Formstücke aus Stahl mit Emaillierung (ISO 28721-4:2010)This European Standard was approved by CEN on 8 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 28721-4:2012: ESIST EN ISO 28721-4:2014
EN ISO 28721-4:2012 (E) 2 Contents Page Foreword .3
SIST EN ISO 28721-4:2014
EN ISO 28721-4:2012 (E) 3 Foreword The text of ISO 28721-4:2010 has been prepared by Technical Committee ISO/TC 107 “Metallic and other inorganic coatings” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 28721-4:2012 by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15711:2009. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 28721-4:2010 has been approved by CEN as a EN ISO 28721-4:2012 without any modification.
SIST EN ISO 28721-4:2014
SIST EN ISO 28721-4:2014
Reference numberISO 28721-4:2010(E)© ISO 2010
INTERNATIONAL STANDARD ISO28721-4First edition2010-10-01Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings Émaux vitrifiés — Appareils émaillés pour les installations industrielles — Partie 4: Exigences de qualité pour les tubes et raccords à brides en acier émaillé
SIST EN ISO 28721-4:2014
ISO 28721-4:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2010 – All rights reserved
SIST EN ISO 28721-4:2014
ISO 28721-4:2010(E) © ISO 2010 – All rights reserved iii Contents Page Foreword.iv 1 Scope.1 2 Normative references.1 3 Terms and definitions.2 4 Materials for steel parts.2 5 Information to be supplied by the purchaser.2 6 Requirements.2 7 Tests and certificates.4 8 Marking.5
SIST EN ISO 28721-4:2014
ISO 28721-4:2010(E) iv © ISO 2010 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 28721-4 was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings. ISO 28721 consists of the following parts, under the general title Vitreous and porcelain enamels — Glass-lined apparatus for process plants: ⎯ Part 1: Quality requirements for apparatus, components, appliances and accessories ⎯ Part 2: Designation and specification of resistance to chem
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.