ISO - ISO Related TC

ISO/IEC 14763-4:2021 (E) specifies the measurement of two- and four-pair balanced cabling of
a) end-to-end (E2E) link Class D, E and EA;
b) modular plug terminated links (MPTLs) of Class D, E, EA, F, FA and of Class I and II;
c) direct attach cabling of Class D, E, EA, F, FA and of Class I and II.
The free connectors which terminate two and four pairs in field and laboratory conditions are included.
This second edition cancels and replaces the first edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
• measurement of the transmission performance of modular plug terminated link (MPTL) and direct attach cabling were added.
• Additional requirements of test head designs of E2E link were introduced.

ISO/IEC 11801-9903:2021 establishes a matrix-model for formulating limits for mixed mode parameters within and between two pairs of balanced cabling. This is for the purpose of supporting new, improved balanced cabling channel and link specifications.

ISO/IEC 20924:2021 is available as ISO/IEC 20924:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.ISO/IEC 20924:2021 (E) provides a definition of Internet of Things along with a set of terms and definitions. This document is a terminology foundation for the Internet of Things.

ISO/IEC 30163:2021 specifies the system requirements of an Internet of Things (IoT)/Sensor Network (SN) technology-based platform for chattel asset monitoring supporting financial services, including:
- System infrastructure that describes functional components;
- System and functional requirements during the entire chattel asset management process, including chattel assets in transition, in/out of warehouse, storage, mortgage, etc.;
- Performance requirements and performance specifications of each functional component;
- Interface definition of the integrated platform system.
This document is applicable to the design and development of IoT/SN system for chattel asset monitoring supporting financial services.

ISO/IEC 30161-1:2020(E) specifies requirements for an Internet of Things (IoT) data exchange platform for various services in the technology areas of:
• the middleware components of communication networks allowing the co-existence of IoT services with legacy services;
• the end-points performance across the communication networks among the IoT and legacy services;
• the IoT specific functions and functionalities allowing the efficient deployment of IoT services;
• the IoT service communication networks’ framework and infrastructure; and
• the IoT service implementation guideline for the IoT data exchange platform

ISO/IEC 30144:2020 (E) specifies intelligent wireless sensor network (iWSN) from the perspectives of iWSN's system infrastructure and communications internal and external to the infrastructure, and technical requirements for iWSN to realize smart electrical power substations.

ISO/IEC TR 15067-3-7:2020 (E), which is a Technical Report, explains the organization and structure of the transactive energy systems research, development, and deployment roadmap.

ISO/IEC TR 15067-3-8:2020 (E), which is a Technical Report, provides a conceptual framework for developing architectures and designing solutions related to transactive energy (TE). Transactive energy allows electricity generated locally by consumers using wind, solar, storage, etc., at homes or buildings to be sold into a competitive market. This document provides guidance for enhancing interoperability among distributed energy resources involved in energy management systems at homes and buildings. It addresses gaps identified as problematic for the industry by providing definitions of terms, architectural principles and guidelines, and other descriptive elements that present a common ground for all interested parties to discuss and advance TE.
This document builds upon ISO/IEC 15067-3, with technology to accommodate a market for buying and selling electricity generated centrally or locally by consumers. The energy management agent (EMA) specified in ISO/IEC 15067-3 can represent the customer as a participant in TE. Transactive energy is important for achieving electric grid stability as power from renewable sources such as wind and solar fluctuates with time and weather.

ISO/IEC TR 11801-9910:2020, which is a Technical Report, provides definitions for, and examples of, modular plug terminated link configurations.
This document provides performance specifications for Classes D, E, EA, F, FA, I and II modular plug terminated links.
Test methods are provided in Clause 8 and are specified in ISO/IEC 14763-4

ISO/IEC TR 11801-9909:2020, which is a Technical Report, covers evaluation and recommendations for achieving extended reach, greater than 30 m, for 25 Gbit/s applications over balanced cabling channels.
This document covers channel reference implementations, based on Category 8.1 and Category 8.2, 2 000 MHz, components.
The channel and component category specifications covered in this document are not intended to be normative.

ISO/IEC 30143:2020 provides the guidelines for designing and developing new applications in the underwater environment such as fish farming, environment monitoring, harbour security, etc. This document also:
• provides the components required for developing the application;
• provides instructions for modelling the application with examples;
• helps the user to understand the communication between the elements in the application for modelling the communication between elements;
• guides the user with the design process of underwater applications.

ISO/IEC 30142:2020 provides the overview and requirements of a network management system in underwater acoustic sensor network (UWASN) environment. It specifies the following:
– functions which support underwater network management system;
– entities required for underwater network management system;
– data about the communication between elements in underwater network management system;
– guidelines to model the underwater network management system;
– general and functional requirements of underwater network management system

ISO/IEC 14543-4-301:2020 specifies an application-layer protocol necessary for ensuring interoperability among the products of various manufacturers regarding communications between home air conditioners and controllers, using a protocol called network enhanced communications device (NECD) as specified in ISO/IEC 14543-4-3. This protocol is based on user datagram protocol (UDP) using IPv4 or IPv6 (TCP is optional).

ISO/IEC TR 11801-9908:2020 (E) which is a Technical Report, provides a listing of the data centre application options currently available or in process of standardization utilizing duplex and parallel optical fibre channels. It also identifies migration considerations when upgrading to higher speed applications.

ISO/IEC 60559:2020(E) specifies formats and methods for floating-point arithmetic in computer systems - standard and extended functions with single, double, extended, and extendable precision - and recommends formats for data interchange. Exception conditions are defined and standard handling of these conditions is specified. It provides a method for computation with floating-point numbers that will yield the same result whether the processing is done in hardware, software, or a combination of the two. The results of the computation will be identical, independent of implementation, given the same input data. Errors, and error conditions, in the mathematical processing will be reported in a consistent manner regardless of implementation. This second edition, published as ISO/IEC 60559, replaces the first edition ISO/IEC/IEEE 60559:2011.

ISO/IEC TR 30166:2020 (E) describes the following:
• general Industrial IoT (IIoT) systems and landscapes which outline characteristics, technical aspects and functional as well as non-functional elements of the IIoT structure and a listing of standardizing organisations, consortia and open-source communities with work on all aspects on IIoT;
• considerations for the future standardization perspective of IIoT including risk analysis, new technologies and identified collaboration

ISO/IEC TR 30164:2020 describes the common concepts, terminologies, characteristics, use cases and technologies (including data management, coordination, processing, network functionality, heterogeneous computing, security, hardware/software optimization) of edge computing for IoT systems applications. This document is also meant to assist in the identification of potential areas for standardization in edge computing for IoT.

IEC 21823-2:2020 (E) specifies a framework and requirements for transport interoperability, in order to enable the construction of IoT systems with information exchange, peer-to-peer connectivity and seamless communication both between different IoT systems and also among entities within an IoT system. This document specifies:
• transport interoperability interfaces and requirements between IoT systems;
• transport interoperability interfaces and requirements within an IoT system

ISO/IEC 14543-3-10:2020(E) specifies a wireless protocol for low-powered devices such as energy harvesting devices in a home environment. This wireless protocol is specifically designed to keep the energy consumption of such sensors and switches extremely low.
The design is characterized by
• keeping the communications very short, infrequent and mostly unidirectional, and
• using communication frequencies that provide a good range even at low transmit power and avoid collisions from disturbers.
This allows the use of small and low-cost energy harvesting devices that can compete with similar battery-powered devices. The messages sent by energy harvesting devices are received and processed mainly by line-powered devices such as relay switch actuators, repeaters or gateways. Together these form part of a home automation system, which, when conforming to ISO/IEC 14543 (all parts), is defined as a home electronic system.
This document specifies OSI Layers 1 to 3 of the amplitude modulated wireless short-packet (AMWSP) protocols.
The AMWSP protocol system consists of two and optionally three types of components that are specified in this document. These are the transmitter, the receiver and optionally the repeater. Repeaters are needed when the transmitter and the receiver are located in such a way that no good direct communication between them can be established.
Protection against malicious attacks is handled in the upper layers and thus not treated in this document.

ISO/IEC TR 11801-9906:2020(E) covers channel specifications, for channels constructed from balanced 1 pair cabling components, primarily intended for use in industrial automation and process control applications.
The channel specifications are consistent with corresponding IEEE 802.3 single-pair Ethernet (SPE) applications and are referenced from link segment specifications in the following IEEE SPE physical layer specifications:
• ISO/IEC/IEEE 8802-3:2017/AMD4, 1 000 Mb/s: 1000BASE T1 Type A, ≤ 15 m, 1000BASE T1 Type B, ≤ 40 m;
• ISO/IEC/IEEE 8802-3:2017/AMD1, 100 Mb/s: 100BASE T1, ≤ 15 m;
• IEEE 802.3cg, 10 Mb/s: 10BASE T1S, ≤ 15 m; 10BASE T1L, ≤ 1 000 m.
The channel component specifications are referenced according to corresponding IEC balanced 1 pair cable and connector specifications.
Channel specifications include IL, RL, TCL, coupling attenuation, and alien crosstalk parameters specifications.
Channel EMC related specifications include electromagnetic isolation levels E1, E2 and E3, which are defined according to the MICE standard environmental characterization system specified in ISO/IEC 11801-1

ISO/IEC 14763-2:2019 specifies requirements for the planning, installation and operation of telecommunications cabling and cabling infrastructures including cabling, pathways, spaces and telecommunications bonds (other than that specified in ISO/IEC 30129) in support of generic cabling standards and associated documents. The following aspects are addressed:
a) specification of the installation;
b) quality assurance;
c) installation planning;
d) installation practice;
e) documentation;
f) administration;
g) testing;
h) inspection;
i) operation;
j) maintenance;
k) repair.
The requirements and recommendations of Clauses 5 to 14 are premises-independent. Annexes C through G contain premises-specific amendments of and additions to these requirements and recommendations.
In addition, this document describes the methodology for the assessment of spaces, pathways, pathway systems and cabling (either installed or planned) in support of remote powering objectives.
This document excludes specific requirements applicable to other cabling systems (e.g. power supply cabling); however, it takes account of the effects other cabling systems may have on the installation of telecommunications cabling (and vice versa) and gives general advice.
This document excludes those aspects of installation associated with the transmission of signals in free space between transmitters, receivers or their associated antenna systems (e.g. wireless, radio, microwave or satellite).
This document is applicable to certain hazardous environments but does not exclude additional requirements which are applicable in particular circumstances (e.g. electricity supply and electrified railways).
Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations. However, information given in this document can be of assistance in meeting these standards and regulations.
This second edition includes the following significant technical changes with respect to the previous edition: the inclusion of planning and installation practices to support remote powering over the telecommunications cabling infrastructure and the inclusion of planning and installation practices outside buildings.

ISO/IEC 14776-481:2019 defines a device model that is applicable to all SCSI devices. Other command standards expand on the general SCSI device model in ways appropriate to specific types of SCSI devices.
ISO/IEC 14776 (all parts) specifies the interfaces, functions, and operations necessary to ensure interoperability between conforming SCSI implementations. This document is a functional description. Conforming implementations employ any design technique that does not violate interoperability.
This document defines security features for use by all SCSI devices. This document defines the security model that is basic to every device model and the parameter data that applies to any device model. For additional information on the security goals and threat model discussed in this document see Annex A.

ISO/IEC 14776-415:2019 defines a reference model that specifies common behaviors for SCSI devices, and an abstract structure that is generic to all SCSI I/O system implementations.The set of Small Computer System Interface (SCSI) specifies the interfaces, functions, and operations necessary to ensure interoperability between conforming SCSI implementations. This document is a functional description. Conforming implementations employ any design technique that does not violate interoperability.
The following concepts from previous versions of the SAM standard are made obsolete by this version:
a) support for the SPI-5 SCSI transport protocol;
b) Contingent Allegiance;
c) the TARGET RESET task management function;
d) basic task management model;
e) untagged tasks; and
f) linked command function.

ISO/IEC TR 30148:2019 (E) describes:
– the structure of wireless gas meter networks, and
– the application protocol of wireless gas meter networks

ISO/IEC 15067-3-3:2019(E) specifies a high-level architecture and a set of models for a demand-response energy management system with multiple interacting EMAs in a home or community housing (such as one or more apartment buildings or a campus of houses). These models specify the structure among multiple EMAs, which can be arranged in a mesh or hierarchical structure. This document builds upon ISO/IEC 15067-3.

ISO/IEC 14776-224:2019(E) defines the Small computer system interface (SCSI) Fibre Channel Protocol (FCP). This standard defines how the Fibre Channel services and the defined Information Units (IUs) are used to perform the services defined by the SCSI Architecture Model - 5 (SAM-5). This fourth version includes additions and clarifications to the third version (ISO/IEC 14776-223:2008), removes information that is now contained in other standards, and describes additional error recovery capabilities for the Fibre Channel Protocol.

ISO/IEC TR 11801-9907:2019(E), which is a Technical Report, provides definitions for, and examples of, direct attach cabling configurations. This document provides performance specifications for Classes D, E, EA, F, FA, I and II direct attach cabling by reference to ISO/IEC 11801-1.
Informative limits for Class I direct attach cabling to support 5 m short reach mode application according to ISO/IEC/IEEE 8802 3:2017/AMD3, i.e. 25GBASE-T and 40GBASE-T, are provided in Annex A.
Test methods will be provided in the second edition of ISO/IEC 14763-4.
Direct attach cabling connects two pieces of equipment, it has connectors at each end, and no intermediate connecting hardware.

ISO/IEC 14543-5-101:2019 (E) enables a media connection, resource sharing and co-operation among computers, home appliances and consumer electronics using remote access (RA). Also, users and devices can share and control media resources. This document specifies:
• an IGRS remote media access profile based on the IGRS RA core protocol and the IGRS RA platform protocol, and
• application rules for the interoperation between IGRS RA media users and devices

ISO/IEC 14543-5-12:2019(E) specifies the test and verification methods for an intelligent grouping and resource sharing (IGRS) remote access (RA) user or device,
defines the structure of a user and device testing system for IGRS remote access, describes and specifies the exchange process between a user or device-under-test with a standard IGRS RA service platform (IRSP), and describes and specifies the rules to have validating messages.
This document is applicable to the test and verification of an IGRS RA device or user.

ISO/IEC 21823-1:2019(E) provides an overview of interoperability as it applies to IoT systems and a framework for interoperability for IoT systems. This document enables IoT systems to be built in such a way that the entities of the IoT system are able to exchange information and mutually use the information in an efficient way. This document enables peer-to-peer interoperability between separate IoT systems.
This document provides a common understanding of interoperability as it applies to IoT systems and the various entities within them.

ISO/IEC 20924:2018(E) provides a definition of Internet of Things along with a set of terms and definitions forming a terminology foundation for the Internet of Things.
The electronic version of this International Standard can be downloaded from the ISO/IEC Information Technology Task Force (ITTF) website.

ISO/IEC 14776-263:2018 The SCSI family of standards provides for many different transport protocols that define the rules for exchanging information between different SCSI devices. This document defines the rules for exchanging information between SCSI devices using a serial interconnect. Other SCSI transport protocol standards define the rules for exchanging information between SCSI devices using other interconnects.

ISO/IEC 30141:2018 This document provides a standardized IoT Reference Architecture using a common vocabulary, reusable designs and industry best practices. It uses a top down approach, beginning with collecting the most important characteristics of IoT, abstracting those into a generic IoT Conceptual Model, deriving a high level system based reference with subsequent dissection of that model into five architecture views from different perspectives.
The contents of the corrigendum of December 2020 have been included in this copy.

ISO/IEC 30140-3:2018 The 30140 series provides general requirements, reference architecture and high-level interface guidelines supporting interoperability among underwater acoustic sensor networks (UWASNs). Part 3 provides descriptions for the entities and interfaces of the UWASN reference architecture.

ISO/IEC 30140-4:2018 The ISO/IEC 30140 series provides general requirements, reference architecture and high-level interface guidelines supporting interoperability among underwater acoustic sensor networks (UWASNs). Part 4 provides information on interoperability requirements among entities within a UWASN and among various UWASNs.

ISO/IEC 14776-454:2018(E) provides for many different types of SCSI devices and specifies the interfaces, functions and operations necessary to ensure interoperability between conforming SCSI implementations. This standard defines the SCSI commands that are mandatory and optional for all SCSI devices.

ISO/IEC 14763-4:2018(E) specifies the measurement at frequencies of end-to-end links of two- and four-pair balanced cabling of 100 MHz of Class D and 250 MHz of Class E including free connectors which terminate two and four pairs in both field and laboratory conditions.

ISO/IEC 30140-1:2018(E) This part of ISO/IEC 30140 provides a general overview of underwater acoustic sensor networks (UWASN). It describes their main characteristics in terms of the effects of propagation variability and analyses the main differences with respect to terrestrial networks. It further identifies the specificities of UWASN and derives some specific and general requirements for these networks.

This Technical Report provides guidance to determine whether and which installed channels will support 25GBASE-T. It also provides mitigation procedures to improve the performance of installed channels to the point where the 25GBASE-T application is supported. Additionally, it recommends the use of Class I and Class II channels to support 25GBASE-T in new installations.

ISO/IEC 14776-154:2017(E) This document specifies the functional requirements for the Serial Attached SCSI (SAS) physical interconnect, which is compatible with the Serial ATA physical interconnect. The SAS Protocol Layer - 3 (SPL-3) standard documents the SAS protocol layer corresponding to the Serial Attached SCSI - 3 (SAS-3), defining the rules for exchanging information between SCSI devices using a serial interconnect.

ISO/IEC 14165-151:2017(E) This part of ISO/IEC 14165 describes extensions to the Fibre Channel signaling and physical layer requirements defined in ISO/IEC 14165-142 to transport Fibre Channel over the commonly available 4-pair balanced copper cablings specified in ISO/IEC 11801:2002 and TIA/EIA-568-B.2-2001. This standard is one of the Fibre Channel family of standards.

ISO/IEC 10192-3:2017(E) this part of ISO/IEC 10192 specifies a Universal Communication Module (UCM) that transfers energy management data via a home network between an end device and an energy management agent (specified in ISO/IEC 15067-3) or an energy service provider. This document specifies the mechanical, electrical and logical characteristics of the interfaces of UCM to an end device and a choice of interfaces to a home communications network.

ISO/IEC TR 22417:2017(E) This technical report identifies IoT scenarios and use cases based on real-world applications and requirements. The use cases provide a practical context for considerations on interoperability and standards based on user experience. They also clarify where existing standards can be applied and highlight where standardization work is needed.

ISO/IEC 11801-6:2017(E) This part of ISO/IEC 11801 specifies generic cabling within premises that comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling.
The contents of the corrigendum of April 2018 have been included in this copy.