47.020.40 - Lifting and cargo handling equipment

This document specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term for them to be understood by all specialists. This document is applicable only to equipment which is used for the construction and maintenance of navigable waterways and the extraction of soil. The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can be...view more

This document specifies noise limits, noise measurement methods and hearing protection for marine cranes, including electro-hydraulic cylinder luffing cranes, electro-hydraulic wire rope luffing cranes and electric wire rope luffing cranes. This document is applicable to the noise assessment of marine cranes and for the protection of their operators.

This document specifies the general technical manufacturing requirements for marine cranes of metal construction. This document is applicable to the following types of marine cranes: — deck cranes mounted on ships for handling cargo or containers in harbour conditions; — floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions; — engine room cranes and provision cranes, etc. mounted on ships (including floating docks) for handling equipment and stores in h...view more

This document specifies the operation and maintenance requirements of marine cranes, including electro-hydraulic cylinder luffing cranes, electro-hydraulic wire rope luffing cranes and electric wire rope luffing cranes. This document is applicable to the following types of marine cranes operating in harbour or sheltered water conditions: — deck cranes mounted on ships for handling equipment, cargo or containers in harbour or sheltered water conditions; — floating cranes mounted on barges or pont...view more

This document provides a single classification for all types of dredgers designed for loosening, raising,
transporting and disposing of dredged material.

ISO 19355:2016 specifies the structural requirements for marine cranes of metal construction. ISO 19355:2016 is applicable to the following types of marine cranes: - deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions; - floating cranes or grab cranes mounted on ships, barges or pontoons for operating in harbour conditions; - engine room cranes and provision cranes, etc. mounted on ships (including floating docks) for handling equipment and stor...view more

ISO 19357:2016 specifies the requirements for design, construction, safety, performance, acceptance test and operation of marine cranes for low temperature operation. ISO 19357:2016 is applicable to marine cranes of the following types, which are exposed to and operated in low temperatures: - deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions; - floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions or ...view more

Rigging used for marine cranes is mainly wire rope rigging. ISO 19360:2016 specifies the technical requirements of the selection and application of running rigging and standing rigging used for wire rope rigging of marine cranes. ISO 19360:2016 specifies the minimum requirements of the allowable strength and performance level for wire ropes of marine cranes according to the design, application and maintenance requirements of cranes. ISO 19360:2016 specifies the implementation criteria of install...view more

ISO 19354:2016 specifies the general requirements for marine cranes of metal construction. It is applicable to the following types of marine cranes: - deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions; - floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions; - engine room cranes and provision cranes, etc. mounted on ships (including floating docks) for handling equipment and stores in harbour conditio...view more

ISO 3078:2016 specifies the general requirements of cargo winches on cargo derricks, particularly electric drive or hydraulic drive.

ISO 19356:2016 describes the required tests and the testing procedures for marine cranes of metal construction. ISO 19356:2016 is applicable to the following types of marine cranes: - deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions; - floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions; - engine room cranes, provision cranes, etc. mounted on ships (including floating docks) for handling equipment ...view more

ISO 16858:2013 specifies the structural types, basic parameters, technical requirements, test methods, inspection rules, marking, storage, and transportation of sheaves, loose gear of lifting appliances on ships. ISO 16858:2013 is applicable to hot-rolled sheaves of lifting appliances on ships.

ISO 16856:2013 specifies the types and basic parameters, technical requirements, marking, storage, and transportation, use and maintenance of hooks as loose gear of lifting appliances on ships. ISO 16856:2013 is applicable to lifting appliances on ships.

ISO 16857:2013 specifies the types and basic parameters, technical requirements, marking, storage, and transportation, use and maintenance of shackles, loose gear of lifting appliances on ships. ISO 16857:2013 is applicable to lifting appliances on ships.

ISO 16855:2013 specifies the general requirements for loose gear of lifting appliances on ships. ISO 16855:2013 is applicable to lifting appliances on ships.

This European Standard specifies the requirements for general-purpose offshore cranes including their supporting pedestals or structures. The standard is applicable to general-purpose offshore cranes covered by the scope of this European Standard which are manufactured after the date of its publication as EN. This European Standard is not applicable to general-purpose offshore cranes which are manufactured before the date of its publication as an EN. This European Standard does not cover use of ...view more

This European Standard specifies the requirements for general-purpose offshore cranes including their supporting pedestals or structures.
The standard is applicable to general-purpose offshore cranes covered by the scope of this European Standard which are manufactured after the date of its publication as EN.
This European Standard is not applicable to general-purpose offshore cranes which are manufactured before the date of its publication as an EN.
This European Standard does not cover use ...view more