EN ISO 13731:2001

Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001)

This Standard defines physical quantities in the field of the ergonomics of the thermal environment. The corresponding symbols and units are also listed. The aim of this standard is: - to give vocabulary and symbols for the quantities used in standards on ergonomics of the thermal environment; - to provide a reference of vocabulary and symbols to be used in writing future standards or other publications on the ergonomics of the thermal environment.

Ergonomie des Umgebungsklimas - Begriffe und Symbole (ISO 13731:2001)

Diese Internationale Norm definiert die physikalischen Größen im Bereich der Ergonomie des Umgebungsklimas. Die entsprechenden Symbole und Einheiten werden ebenfalls aufgelistet.
Das Ziel dieser Internationalen Norm ist es:
¾ Begriffe und Symbole für die in den Internationalen Normen zur Ergonomie des Umgebungsklimas angewendeten Größen zu geben;
¾ eine Bezugsquelle für Begriffe und Symbole, die beim Erstellen künftiger Internationaler Normen oder anderer Veröffentlichungen zur Ergonomie des Umgebungsklimas anzuwenden sind, zur Verfügung zu stellen.
ANMERKUNG      Diese Internationale Norm gestattet die korrekte Aufnahme von Begriffen und Symbolen in neue Internationale Normen oder während der Überarbeitung vorhandener Normen (siehe Literaturhinweise), wenn sie benötigt werden.

Ergonomie des ambiances thermiques - Vocabulaire et symboles (ISO 13731:2001)

La présente Norme internationale définit les grandeurs physiques dans le domaine de l'ergonomie des ambiances thermiques. La liste des symboles et unités correspondants y figure également.  L'objectif de la présente Norme internationale est  - de donner le vocabulaire et les symboles relatifs aux grandeurs utilisées dans les Normes internationales concernant l'ergonomie des ambiances thermiques, et  - de fournir une référence du vocabulaire et des symboles à utiliser lors de l'élaboration de futures Normes internationales ou d'autres publications traitant de l'ergonomie des ambiances thermiques.  
NOTE La présente Norme internationale va permettre d'introduire avec justesse le vocabulaire et les symboles dans les nouvelles Normes internationales ou lors de la révision des normes existantes (voir la bibliographie), en tant que de besoin.

Ergonomija toplotnega okolja - Slovar in simboli (ISO 13731:2001)

General Information

• Status: Published
• Publication Date: 14-Dec-2001
• ICS: 01.040.13 - Environment. Health protection. Safety (Vocabularies)
• ICS: 01.060 - Quantities and units
• ICS: 13.180 - Ergonomics
• Technical Committee: CEN/TC 122 - Ergonomics
• Drafting Committee: CEN/TC 122/WG 11 - Ergonomics of the Physical Environment
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 30-Sep-2006
• Completion Date: 30-Sep-2006
• Ref Project: SIST EN ISO 13731:2002 - Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ergonomija toplotnega okolja - Slovar in simboli (ISO 13731:2001)Ergonomie des Umgebungsklimas - Begriffe und Symbole (ISO 13731:2001)Ergonomie des ambiances thermiques - Vocabulaire et symboles (ISO 13731:2001)Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001)13.180ErgonomijaErgonomics01.060Quantities and units01.040.13Varstvo okolja in zdravja. Varnost (Slovarji)Environment and health protection. Safety (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN ISO 13731:2001SIST EN ISO 13731:2002en,fr01-september-2002SIST EN ISO 13731:2002SLOVENSKI
STANDARD



SIST EN ISO 13731:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 13731December 2001ICS 01.040.13; 01.060; 13.180English versionErgonomics of the thermal environment - Vocabulary andsymbols (ISO 13731:2001)Ergonomie des ambiances thermiques - Vocabulaire etsymboles (ISO 13731:2001)Ergonomie des Umgebungsklimas - Begriffe und Symbole(ISO 13731:2001)This European Standard was approved by CEN on 15 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 13731:2001 ESIST EN ISO 13731:2002



EN ISO 13731:2001 (E)2ForewordThe text of the International Standard ISO 13731:2001 has been prepared by Technical CommitteeISO/TC 159 "Ergonomics" in collaboration with Technical Committee CEN/TC 122 "Ergonomics", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by June 2002, and conflicting national standards shall bewithdrawn at the latest by June 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United Kingdom.NOTE FROM CMC: The foreword is susceptible to be amended on reception of the German languageversion. The confirmed or amended foreword, and when appropriate, the normative annex ZA for thereferences to international publications with their relevant European publications will be circulated withthe German version.Endorsement noticeThe text of the International Standard ISO 13731:2001 was approved by CEN as a European Standardwithout any modification.SIST EN ISO 13731:2002



SIST EN ISO 13731:2002



Reference numberNuméro de référenceISO 13731:2001(E/F)© ISO 2001
INTERNATIONAL STANDARD NORME INTERNATIONALE ISO13731First editionPremière édition2001-12-15Ergonomics of the thermal environment — Vocabulary and symbols Ergonomie des ambiances thermiques — Vocabulaire et symboles
SIST EN ISO 13731:2002



ISO 13731:2001(E/F) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
PDF – Exonération de responsabilité Le présent fichier PDF peut contenir des polices de caractère
...