iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 962:1996/A2:2000

(Amendment)

Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests

Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests

EN 962:1996 is being amended to address proposals made by the CEN consultant for alignment with RID/ADR.

Ortsbewegliche Gasflaschen - Ventilschutzkappen und Ventilschutzvorrichtungen für Gasflaschen in industriellem und medizinischem Einsatz - Gestaltung, Konstruktion und Prüfungen

Bouteilles à gaz transportables - Chapeaux fermés et chapeaux ouverts de protection des robinets de bouteilles à gaz industriels et médicaux - Conception, construction et essais

Premične plinske jeklenke - Zaščitne kape ventilov plinskih jeklenk za uporabo v industriji in medicini - Zasnova, izdelava in preskusi - Dopolnilo 2

General Information

Status
Withdrawn
Publication Date
22-Aug-2000
Withdrawal Date
31-Aug-2008
ICS
23.020.30 - Pressure vessels, gas cylinders
23.020.35 - Gas cylinders
23.060.99 - Other valves
Technical Committee
CEN/TC 23 - Transportable gas cylinders
Drafting Committee
CEN/TC 23/SC 2 - Fittings
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Sep-2008
Completion Date
01-Sep-2008
Directive
94/55/EC - Transport of dangerous goods by road
96/49/EC - Transport of dangerous goods by rail
96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
Mandate
M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
Ref Project
SIST EN 962:1999/A2:2001 - Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests

Relations

Replaced By
EN ISO 11117:2008 - Gas cylinders - Valve protection caps and valve guards - Design, construction and tests (ISO 11117:2008)
Effective Date
22-Dec-2008
Amends
EN 962:1996 - Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests
Effective Date
22-Dec-2008
Parent
EN 962:1996/A1:1999 - Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests
Effective Date
22-Dec-2008

Buy Standard

EN 962:1999/A2:2001EN 962:1999/A2:2001
PreviousNext
Amendment
EN 962:1999/A2:2001
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2001
3UHPLþQHSOLQVNHMHNOHQNH=DãþLWQHNDSHYHQWLORYSOLQVNLKMHNOHQN]DXSRUDERY
LQGXVWULMLLQPHGLFLQL=DVQRYDL]GHODYDLQSUHVNXVL'RSROQLOR
Transportable gas cylinders - Valve protection caps and valve guards for industrial and
medical gas cylinders - Design, construction and tests
Ortsbewegliche Gasflaschen - Ventilschutzkappen und Ventilschutzvorrichtungen für
Gasflaschen in industriellem und medizinischem Einsatz - Gestaltung, Konstruktion und

Prüfungen
Bouteilles a gaz transportables - Chapeaux fermés et chapeaux ouverts de protection
des robinets de bouteilles a gaz industriels et médicaux - Conception, construction et
ess
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 3379:2024(Main)
Leather - Determination of distension and strength of surface (Ball burst method) (ISO 3379:2024)
SIST EN ISO 3379:2025

This document specifies a test method for the determination of distension and strength of the leather grain or finished surface. This method is applicable to all flexible leathers and it is particularly suitable to determine the lastability of leathers for footwear uppers.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12007-5:2024(Main)
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements
SIST EN 12007-5:2025

This document describes the specific functional requirements for the transportation of gases (gaseous energy carriers) through service lines in addition to the general functional requirements of EN 12007 1 for:
a)   a maximum operating pressure (MOP) up to and including 16 bar;
b)   an operating temperature between −20 °C and +40 °C;
c)   gases and blends of gases which are in the gaseous state when conveyed in the gas pipeline infrastructure such as hydrogen, hydrogen rich, and methane rich gases, dimethyl ether (DME) and propane and butanes used for combustion and/or as feedstock, excluding steam and compressed air, where technical evaluation has ensured that operating conditions, constituents and properties of the gas do not affect the safe operation and maintenance of the service line.
It applies to their design, construction, commissioning, decommissioning, operation, maintenance, extension and other associated works including safety and environmental aspects. The service line is the physical asset comprising of pipework from the gas main branch saddle or top tee to the outlet of the distribution system operator’s nominated point(s) of delivery (for example: isolation valve, regulator, meter connection or combination of regulator and isolation valve).
This document does not apply retrospectively to installations before the publication date unless specifically stated.
Specific functional requirements for:
—   polyethylene pipelines are given in EN 12007 2;
—   steel pipelines are given in EN 12007 3;
—   polyamide (PA-U) pipelines are given in CEN/TS 12007 6;
—   pipework for buildings are given in EN 1775;
—   pressure regulating installations are given in EN 12279 or EN 12186;
—   pressure testing, commissioning and decommissioning are given in EN 12327;
—   safety management system (SMS) and pipeline integrity management system (PIMS) are given in EN 17649.
This document specifies common basic principles for gas infrastructure. Users of this document are expected to be aware that there can exist more detailed national standards and/or codes of practice in the CEN member countries. This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of terms of additional requirements in legislation/regulation than in this document, CEN/TR 13737 (all parts) illustrates these terms.
CEN/TR 13737 gives:
—   description of legislations/regulations applicable in a member state;
—   if appropriate, more restrictive national requirements;
—   a national contact point for the latest information.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18003:2024(Main)
Food authenticity - Determination of 16-O-Methylcafestol content of green and roasted coffee - HPLC-method
SIST EN 18003:2025

This document specifies a high-performance liquid chromatography (HPLC) method for determining the 16-O-Methylcafestol content in green and roasted coffee.
The method is suitable for a content of 40 mg/kg to 1 600 mg/kg of 16-O-Methylcafestol of green and roasted coffee, respectively. The collaborative study has shown that mass fractions also between 20 mg/kg to 40 mg/kg can be successfully analysed depending on the laboratory equipment.
The compliance assessment process is not part of this document.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17972:2024(Main)
Food authenticity - Food authenticity and fraud - Concepts, terms and definitions
SIST EN 17972:2025

This document provides technical definitions of terms relating to authenticity and fraud when referring to food products. All terms and definitions are in the context of food supply chains, but most of them can also be applied when referring to feed products and the feed supply chain.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16214-3:2024(Main)
Sustainability and greenhouse gas emission saving criteria for biomass for energy applications - Principles, criteria, indicators and verifiers - Part 3: Sustainability criteria related to environmental aspects
kSIST FprEN 16214-3:2023

This document specifies procedures, criteria and indicators meeting the sustainability criteria of European Commission Directive 2018/EU/2001 (RED II), the recast of the Renewable Energy Directive, for agricultural biomass and forest biomass for energy applications, i.e. biofuels, bioliquids and biomass fuels. This document is applicable to production, cultivation and harvesting of biomass from agricultural land and forest land for biofuels, bioliquids and biomass fuel production.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17137:2024(Main)
Textiles and textile products - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes
SIST EN 17137:2024

This document specifies a test method using gas chromatography with mass selective detector (GC-MS) for detection and quantification of chlorobenzenes, chlorotoluenes, and α-chlorinated toluenes in fibres, yarns, fabrics, coated fabrics and plastics.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17992:2024(Main)
Food authenticity - Determination of the sum of 16-O-Methylcafestol, 16-O-Methylkahweol and their derivatives in roasted coffee by ¹H-qNMR
SIST EN 17992:2025

This document specifies a method for the determination of soluble 16-O-Methylcafestol and 16-O-Methylkahweol content (the sum of free forms and derivatives, e.g. fatty acid esters, henceforth abbreviated as 16-OMD = “diterpenes”) in roasted coffee (beans or ground), using quantitative proton nuclear magnetic resonance spectroscopy (1H-qNMR).
If complying with the experimental parameters described below, this test procedure has been proven for the following mass fraction range:
w16-OMD:    20 mg/kg to 2 000 mg/kg.
The mass fraction range can be expanded by suitable changes of the experimental parameters, e.g. a different weighed portion of ground coffee or the accumulation of more NMR-transients.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 556-2:2024(Main)
Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 2: Requirements for aseptically processed medical devices
SIST EN 556-2:2025

This document specifies the requirements for an aseptically processed medical device to be designated “STERILE”.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14972-5:2024(Main)
Fixed firefighting systems - Water mist systems - Part 5: Test protocol for car garages for automatic nozzle systems
SIST EN 14972-5:2025

This document specifies the evaluation of the fire performance of water mist systems for non-stacking garages, fully enclosed garages and underground garages.
This document is applicable for horizontal, solid, flat ceilings with heights of 2 m and above.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22476-16:2024(Main)
Geotechnical investigation and testing - Field testing - Part 16: Borehole shear test (ISO 22476‑16:2024)
kSIST FprEN ISO 22476-16:2023

This document is applicable to the borehole shear test using the phicometer procedure, commonly named the phicometer test (etymologically derived from phi for friction angle, co for cohesion and meter for measurement).
The test can be performed in all types of natural soils, fills and artificial soils, which can be saturated or not.
It does not apply to very soft fine soils, very loose coarse soils, medium strong to very strong rocks and natural or artificial soils with a predominance of cobbles having a particle diameter greater than 150 mm.
Generally, the test is applicable in soils with an order of magnitude of their in situ resistance characteristics as follows:
—     Ménard pressuremeter limit pressure: 0,4 MPa < plM < 3,5 MPa approximately or more than 4 MPa in granular non-cohesive soils;
—     CPT Cone resistance: 1,5 MPa —     SPT N: 8 The test can also be carried out in soils presenting a resistance outside these application limits as long as the representativeness of the results is assessed or validated by the analysis of the PBST graphs (see Clause 8).
This document applies only to tests carried out at a depth less than or equal to 30 m.
The parameters derived from this test are the shear strength properties, as the cohesion and angle of friction.

  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day