iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 844-7:1997

(Main)

Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber

Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber

This part of the standard defines terms relating to anatomical structure of timber used in European Standards.

Rund- und Schnittholz - Terminologie - Teil 7: Begriffe zum anatomischen Aufbau von Holz

Dieser Teil der Europäischen Norm definiert Benennungen zum anatomischen Aufbau von Holz, die in Europäischen Normen vorkommen.

Bois ronds et bois sciés - Terminologie - Partie 7: Termes relatifs à la structure anatomique du bois

La présente partie de norme définit les termes relatifs à la structure anatomique du bois utilisés dans les Normes Européennes.

Okrogli in žagani les - Terminologija - 7. del: Izrazi za biološko zgradbo lesa

General Information

Status
Withdrawn
Publication Date
18-Mar-1997
Withdrawal Date
27-Aug-2019
ICS
01.040.79 - Wood technology (Vocabularies)
79.040 - Wood, sawlogs and sawn timber
Technical Committee
CEN/TC 175 - Round and sawn timber
Drafting Committee
CEN/TC 175/WG 1 - General matters, definitions, measurement methods
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
28-Aug-2019
Ref Project
SIST EN 844-7:2003 - Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber

Relations

Replaced By
EN 844:2019 - Round and sawn timber - Terminology
Effective Date
03-Jul-2013

Buy Standard

EN 844-7:2003EN 844-7:2003
PreviousNext
Standard
EN 844-7:2003
English, French and German language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 844-7:2003
01-oktober-2003
Okrogli in žagani les - Terminologija - 7. del: Izrazi za biološko zgradbo lesa
Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of
timber
Rund- und Schnittholz - Terminologie - Teil 7: Begriffe zum anatomischen Aufbau von
Holz
Bois ronds et bois sciés - Terminologie - Partie 7: Termes relatifs a la structure
anatomique du bois
Ta slovenski standard je istoveten z: EN 844-7:1997
ICS:
01.040.79 Lesna tehnologija (Slovarji) Wood technology
(Vocabularies)
79.040 Les, hlodovina in žagan les Wood, sawlogs and sawn
timber
SIST EN 844-7:2003 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 --------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 844:2019(Main)
Round and sawn timber - Terminology
SIST EN 844:2019

This European Standard defines general terms relating to sawn timber and round timber used in European Standards.

  • Standard
    100 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 15679:2007(Main)
Thermal Modified Timber - Definitions and characteristics
SIST-TS CEN/TS 15679:2008

La présente Spécification technique donne les définitions et les caractéristiques relatives au bois modifié thermiquement. Le bois modifié thermiquement est utilisé dans des milieux intérieurs (secs, humides) et extérieurs. NOTE 1 Le bois modifié thermiquement est généralement un produit semi-fini dont les applications sont, par exemple, les planchers, les lambris, les bardages, les platelages, les fenêtres, les portes, le mobilier et autre menuiserie intérieure et extérieure. Les normes de produits spécifient les exigences et les méthodes d’essai devant être prises en compte. NOTE 2 Utilisation dans des applications porteuses – il convient de se référer aux normes EN pertinentes.

  • Technical specification
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13556:2003(Main)
Round and sawn timber - Nomenclature of timbers used in Europe
SIST EN 13556:2004

This European Standard lists commercial hardwood and softwood timbers used in Europe.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 844:2019(Main)
Round and sawn timber - Terminology
SIST EN 844:2019

This European Standard defines general terms relating to sawn timber and round timber used in European Standards.

  • Standard
    100 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 15679:2007(Main)
Thermal Modified Timber - Definitions and characteristics
SIST-TS CEN/TS 15679:2008

La présente Spécification technique donne les définitions et les caractéristiques relatives au bois modifié thermiquement. Le bois modifié thermiquement est utilisé dans des milieux intérieurs (secs, humides) et extérieurs. NOTE 1 Le bois modifié thermiquement est généralement un produit semi-fini dont les applications sont, par exemple, les planchers, les lambris, les bardages, les platelages, les fenêtres, les portes, le mobilier et autre menuiserie intérieure et extérieure. Les normes de produits spécifient les exigences et les méthodes d’essai devant être prises en compte. NOTE 2 Utilisation dans des applications porteuses – il convient de se référer aux normes EN pertinentes.

  • Technical specification
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1001-1:2005(Main)
Durability of wood and wood-based products - Terminology - Part 1: List of equivalent terms
SIST EN 1001-1:2006

This document provides the basis for selecting the preferred equivalent terms for the drafting of future European Standards and other documents on natural or conferred durability of wood and wood based products.
NOTE    A new list of terms relating to environment, health and safety aspects will be prepared and will be dealt within an other European Standard.

  • Standard
    41 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13556:2003(Main)
Round and sawn timber - Nomenclature of timbers used in Europe
SIST EN 13556:2004

This European Standard lists commercial hardwood and softwood timbers used in Europe.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1001(Main)
Durability of wood and wood-based products - Terminology
oSIST prEN 1001:2021

This document provides the basis for selecting the preferred equivalent terms for the drafting of future European standards and other documents on natural or conferred durability of wood and wood based products.

  • Draft
    76 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day