Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity

1.1   This document specifies the immunity performance criteria and test levels for apparatus used in lifts, escalators and moving walks which are intended to be permanently installed in buildings including the basic safety requirements in regard to their electromagnetic environment. These levels represent essential EMC requirements.
This document refers to EM conditions as existing in residential, office and industrial buildings.
This document addresses commonly known EMC related hazards and hazardous situations relevant to lifts, escalators and moving walks when they are used as intended and under the conditions foreseen by the lift installer or escalator and/or moving walk manufacturer.
However:
-   performance criteria and test levels for apparatus/assembly of apparatus used in general function circuits do not cover situations with an extremely low probability of occurrence;
-   this document does not apply to other apparatus already proven to be in conformity to the EMC Directive, and not related to the safety of the lift, escalator or moving walk, such as lighting apparatus, communication apparatus, etc.
1.2   This document does not apply to electromagnetic environments such as:
-   radio-transmitter stations,
-   railways and metros,
-   heavy industrial plant,
-   electricity power station,
which need additional investigations.
1.3   This document is not applicable to apparatus which were manufactured before the date of its publication as EN 12016.

Elektromagnetische Verträglichkeit - Produktfamilien-Norm für Aufzüge, Fahrtreppen und Fahrsteige - Störfestigkeit

1.1   Diese Europäische Norm legt die Bewertungskriterien und Prüfschärfegrade für Aufzüge, Fahrtreppen und Fahrsteige fest, die zum dauerhaften Einbau in Gebäuden vorgesehen sind, einschließlich der grundlegenden Sicherheitsanforderungen im Hinblick auf ihre elektromagnetische Umgebung. Diese Prüfschärfegrade stellen wesentliche EMV-Anforderungen dar.
Die Norm erstreckt sich auf elektromagnetische Umgebungsbedingungen, wie sie in Wohn-, Büro- und Industriegebäuden vorliegen.
Diese Norm behandelt allgemein bekannte EMV-relevante Gefährdungen und Gefährdungssituationen, die auf Aufzüge, Fahrtreppen und Fahrsteige zutreffen, wenn sie bestimmungsgemäß und entsprechend den vom Montagebetrieb des Aufzugs oder dem Hersteller der Fahrtreppe und/oder des Fahrsteigs vorgesehenen Bedingungen verwendet werden.
Jedoch:
-   decken Prüfschärfegrade und Bewertungskriterien für Baugruppe/Baugruppenkombination, die in allgemeinen Funktionsbaugruppen eingesetzt werden, keine Situationen ab, die nur mit einer äußerst geringen Wahrscheinlichkeit eintreten;
-   bezieht sich diese Norm nicht auf andere Baugruppen, die bereits auf Konformität mit der EMV-Richtlinie geprüft sind und keinen Bezug zur Sicherheit des Aufzugs, der Fahrtreppe oder des Fahrsteigs aufweisen, wie z. B. Beleuchtungs- und Kommunikationseinrichtungen.
1.2   Diese Europäische Norm gilt nicht für elektromagnetische Umgebungen, wie bei:
-   Rundfunksendern;
-   Eisen- und Untergrundbahnen;
-   Anlagen der Schwerindustrie;
-   Kraftwerken;
die zusätzliche Untersuchungen erfordern.
1.3   Diese Norm gilt nicht für Baugruppen, die vor deren Veröffentlichung als EN 12016 hergestellt wurden.

Compatibilité électromagnétique - Norme de la famille de produits ascenseurs, escaliers mécaniques et trottoirs roulants - Immunité

1.1   La présente Norme européenne définit les critères d’aptitude et les niveaux d’essai d’immunité pour les appareillages utilisés dans les ascenseurs, escaliers mécaniques et trottoirs roulants qui sont destinés à être installés de façon permanente dans des bâtiments, y compris les exigences de base relatives à la sécurité de leur environnement électromagnétique. Ces niveaux représentent les exigences essentielles en matière de compatibilité électromagnétique (CEM).
La présente norme s’applique aux conditions électromagnétiques rencontrées dans les bâtiments d’habitation, les bureaux et les établissements industriels.
La présente norme aborde les risques et les situations dangereuses connus en matière de CEM, rencontrés lorsque les ascenseurs, escaliers mécaniques et trottoirs roulants sont utilisés conformément à l’usage prévu et dans les conditions prévues par l’installateur de l’ascenseur ou par le fabricant de l’escalier mécanique et/ou du trottoir roulant.
Cependant :
-   les critères d’aptitude et les niveaux d’essai des appareillages/ensembles d’appareillages utilisés dans des circuits à fonction générale ne couvrent pas les situations à très faible probabilité d’occurrence ;
-   la présente norme ne s’applique pas aux autres appareillages dont la conformité à la Directive CEM est déjà établie, et qui n’ont pas de rapport avec la sécurité de l’ascenseur, de l’escalier mécanique ou du trottoir roulant, tels que les appareils d’éclairage, les appareils de communication, etc.
1.2   La présente Norme européenne ne s’applique pas aux environnements électromagnétiques tels que :
-   les émetteurs de radiodiffusion ;
-   les chemins de fer et métros ;
-   les installations d’industrie lourde ;
-   les centrales électriques ;
qui nécessitent des études supplémentaires.
1.3   La présente norme ne s’applique pas aux appareils fabriqués avant sa date de publication en tant qu’EN 12016.

Elektromagnetna združljivost - Standard skupine izdelkov za dvigala (lifte), tekoče stopnice in tekoče steze - Odpornost proti motnjam

General Information

Status
Not Published
Current Stage
4598 - Decision to abandon - Finalization for Vote
Completion Date
17-May-2021

RELATIONS

Buy Standard

Draft
prEN 12016:2018
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 12016:2018
01-marec-2018

(OHNWURPDJQHWQD]GUXåOMLYRVW6WDQGDUGVNXSLQHL]GHONRY]DGYLJDOD OLIWH WHNRþH

VWRSQLFHLQWHNRþHVWH]H2GSRUQRVWSURWLPRWQMDP

Electromagnetic compatibility - Product family standard for lifts, escalators and moving

walks - Immunity

Elektromagnetische Verträglichkeit - Produktfamilien-Norm für Aufzüge, Fahrtreppen und

Fahrsteige - Störfestigkeit

Compatibilité électromagnétique - Norme de la famille de produits ascenseurs, escaliers

mécaniques et trottoirs roulants - Immunité
Ta slovenski standard je istoveten z: prEN 12016
ICS:
33.100.20 Imunost Immunity
91.140.90 'YLJDOD7HNRþHVWRSQLFH Lifts. Escalators
oSIST prEN 12016:2018 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12016:2018
---------------------- Page: 2 ----------------------
oSIST prEN 12016:2018
DRAFT
EUROPEAN STANDARD
prEN 12016
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2018
ICS 33.100.20; 91.140.90 Will supersede EN 12016:2013
English Version
Electromagnetic compatibility - Product family standard
for lifts, escalators and moving walks - Immunity

Compatibilité électromagnétique - Norme de la famille Elektromagnetische Verträglichkeit - Produktfamilien-

de produits ascenseurs, escaliers mécaniques et Norm für Aufzüge, Fahrtreppen und Fahrsteige -

trottoirs roulants - Immunité Störfestigkeit

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 10.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12016:2018 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 6

2 Normative references .................................................................................................................................... 6

3 Terms and definitions ................................................................................................................................... 7

4 Test procedure .............................................................................................................................................. 10

5 Applicability of tests.................................................................................................................................... 11

6 Evaluation of tests results ......................................................................................................................... 12

6.1 Introduction ................................................................................................................................................... 12

6.2 Performance criteria .................................................................................................................................. 12

6.3 Enclosure ports of safety circuits ........................................................................................................... 12

7 Documentation for the installer of the apparatus/assembly of apparatus ............................ 13

Annex ZA (informative) Relationship between this European standard and the essential

requirements of Directive 2014/30/EU aimed to be covered ..................................................... 21

Annex ZB (informative) Relationship between this European Standard and the essential

requirements of Directive 2006/42/EC aimed to be covered ..................................................... 22

Annex ZC (informative) Relationship between this European Standard and the essential

requirements of Directive 2014/33/EU aimed to be covered ..................................................... 23

Bibliography ................................................................................................................................................................. 24

---------------------- Page: 4 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)
European foreword

This document (prEN 12016:2018) has been prepared by Technical Committee CEN/TC 10 “Lifts,

escalators and moving walks”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12016:2013.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association, and supports essential requirements of EU Directive(s).

For relationship with EU Directive(s), see informative Annexes ZA, ZB and ZC, which are an integral part

of this document.

The test levels and the performance criteria which are given in this European Standard reflect the fact

that lifts, escalators and moving walks, when in use, consist generally of self-contained apparatus (e.g.

machine room, car, etc.).
The related EMC product family standard for emission is:

— EN 12015, Electromagnetic compatibility — Product family standard for lifts, escalators and moving

walks — Emission
---------------------- Page: 5 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)
Introduction
This document is a Type C standard as stated in EN ISO 12100.

This document has been prepared to provide one means of conforming to the requirements of the

Electromagnetic Compatibility (EMC) Directive, the Lifts Directive and the Machinery Directive. The

requirements of this European Standard have been specified so as to ensure an adequate level of

electromagnetic immunity for most cases.

The apparatus concerned and the extent to which hazards, hazardous situations or hazardous events

are covered are indicated in the Scope of this document.

When requirements of this type C standard are different from those which are stated in type-A or type-

B standards, the requirements of this type C standard take precedence over the requirements of the

other standards for apparatus that have been designed and built according to the requirements of this

type C standard.
Test levels and immunity performance criteria are defined for:

— apparatus which are safety components or are used in conjunction with safety components, (safety

circuits);
— apparatus used in general function circuits.

The test levels and requirements are given on the basis that the apparatus, generally, is connected to a

low voltage system.

The requirements for safety circuits provide one means of demonstrating conformity with the essential

health and safety requirements of the Lifts Directive and the Machinery Directive with regard to

immunity against electromagnetic phenomena.

Due to the size of an installed lift, it becomes impracticable to test the total assembly either in a test

laboratory or in situ where the uncontrolled environment may also influence the test procedures and

results. This applies also to measurements within the car. Similar considerations regarding dimensions

apply equally to the testing of escalators and moving walks.
Rational to the revision of the standard EN 12016:1998
a) Important changes

The Scope excludes severe electromagnetic environments and apparatus already proven to be in

conformity with the Electromagnetic Compatibility Directive.

The term “installation” has been changed to “system”. This is due to the fact that official interpretation

defines that fixed installations are not covered by the conformity assessment procedures for CE

marking and declaration of conformity according to the EMC Directive. The scope of the standard is

applicable to the apparatus and assembly of apparatus of lifts and escalators and assembly into systems.

New requirements on radio frequency electromagnetic field above 500 MHz, these are extended to

cover the digital mobile telephone services up to 1960 MHz.
New requirements for surge testing on safety circuits.

New requirements on radio frequency electromagnetic field regarding safety devices as defined by the

Lifts Directive and mobile telephones or radio-transmitters as a result of a risk assessment. It is

assumed that mobile telephones and radio-transmitters are not used at frequencies up to 166 MHz near

safety circuits of equipment covered by the scope of this standard.

Higher requirements on several environmental phenomena considering the progress on EMC

technology and the results of the risk assessment.
---------------------- Page: 6 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)

New requirements have been introduced for immunity to mains power supply voltage interruptions

and voltage dips.
b) Environmental issues

Lifts, escalators and moving walks are systems whose component apparatus/assembly of apparatus are

distributed (and some of which move) throughout the building. The definition in EMC terms of the use

of the building (residential or industrial) cannot be predetermined or assumed to be fixed. Therefore, to

cover requirements in all cases, no differentiation between environments has been made and a single

set of limits has been maintained.

Severe electromagnetic environments have not been considered. Examples of these are: radio-

transmitter stations, railways and metros, heavy industrial plant, electricity power stations. Additional

tests and immunity measures may need to be taken on apparatus to be used in these environments.

It is assumed that no ports connected to safety circuit only are rated at currents greater than 100 A.

Rational to the revision of the standard EN 12016:2004+A1:2008

New requirements on radio frequency electromagnetic field to cover the digital mobile telephone

services and wireless communication systems up to 2 655 MHz.

Performance criteria requirements for radio equipment and telecommunications terminal equipment

as defined by Directive 1999/5/EC used in combined apparatus/assembly of apparatus.

Rational to the revision of the standard EN 12016:2013
Relationship between this European Standard and EN 81-20.

Relationship between this European Standard and the essential requirements of EU Directive

2014/30/EU.

Relationship between this European Standard and the essential requirements of Directive 2006/42/EC.

Relationship between this European Standard and the essential requirements of Directive 2014/33/EU.

---------------------- Page: 7 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)
1 Scope

1.1 This document specifies the immunity performance criteria and test levels for apparatus used in

lifts, escalators and moving walks which are intended to be permanently installed in buildings including

the basic safety requirements in regard to their electromagnetic environment. These levels represent

essential EMC requirements.

This document refers to EM conditions as existing in residential, office and industrial buildings.

This document addresses commonly known EMC related hazards and hazardous situations relevant to

lifts, escalators and moving walks when they are used as intended and under the conditions foreseen by

the lift installer or escalator and/or moving walk manufacturer.
However:

— performance criteria and test levels for apparatus/assembly of apparatus used in general function

circuits do not cover situations with an extremely low probability of occurrence;

— this document does not apply to other apparatus already proven to be in conformity to the EMC

Directive, and not related to the safety of the lift, escalator or moving walk, such as lighting

apparatus, communication apparatus, etc.
1.2 This document does not apply to electromagnetic environments such as:
— radio-transmitter stations,
— railways and metros,
— heavy industrial plant,
— electricity power station,
which need additional investigations.

1.3 This document is not applicable to apparatus which were manufactured before the date of its

publication as EN 12016.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN 55022:2010, Information technology equipment - Radio disturbance characteristics - Limits and

methods of measurement (CISPR 22:2008, modified)

EN 55024:2010, Information technology equipment - Immunity characteristics - Limits and methods of

measurement (CISPR 24:2010)

EN 61000-4-2:2009, Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement

techniques - Electrostatic discharge immunity test (IEC 61000-4-2:2008)
---------------------- Page: 8 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)

EN 61000-4-3:2006, Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement

1)

techniques - Radiated, radio-frequency, electromagnetic field immunity test) (IEC 61000-4-3:2006)

EN 61000-4-4:2012, Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement

techniques - Electrical fast transient/burst immunity test (IEC 61000-4-4:2012)

EN 61000-4-5:2014, Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement

techniques — Surge immunity test (IEC 61000-4-5:2014)

EN 61000-4-6:2014, Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement

techniques - Immunity to conducted disturbances, induced by radio-frequency fields (IEC 61000-4-6:2013)

EN 61000-4-11:2004, Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement

techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-

11:2004)

EN 61000-6-1:2007, Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for

residential, commercial and light-industrial environments (IEC 61000-6-1:2005)

EN 61000-6-2:2005, Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for

industrial environments (IEC 61000-6-2:2005)

IEC 60050-161:1990, International Electrotechnical Vocabulary - Chapter 161: Electromagnetic

compatibility
3 Terms and definitions

For the purposes of this document, the terms and definitions given in EN 61000-6-1:2007, EN 61000-6-

2:2005, IEC 60050-161:1990 and the following apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
assembly of apparatus
arrangement of interconnected apparatus, which can be tested together
Note 1 to entry: See Figure 1 and Figure 2 as examples.
3.2
apparatus
assembly of components with an intrinsic function as defined by its manufacturer
Note 1 to entry: See Figure 1 and Figure 2 as examples.

Note 2 to entry: Safety components listed by Annex IV of the Lifts Directive are considered as apparatus.

1) This document is currently impacted by the amendment EN 61000-4-3:2006/A2:2010.

2) This document is currently impacted by the amendments IEC 60050-161:1990/A1:1997 and IEC 60050-161:1990/A2:1998.

---------------------- Page: 9 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)
Key
assembly of apparatus
1 machinery space 7 landings
2 main control / control cabinet 8 system boundary
3 machine 9 AC – and/or DC power ports
4 door control 10 main switch
5 lift car 11 output power port

6 apparatus installed at the landing (e.g. 12 ports for monitoring and remote alarm systems

push buttons, indicators)
Figure 1 — EMC example (immunity) for lift systems
---------------------- Page: 10 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)
Key
assembly of apparatus
1 control panels 6 machine
2 machinery space (see 4 to 10) 7 AC – and/or DC power ports
3 system boundary 8 main switch
4 machinery space 9 output power port
5 main control/control cabinet 10 ports for monitoring
NOTE The machinery space can also be an external room.
Figure 2 — EMC example (immunity) for escalator and moving walk systems
3.3
enclosure port

physical boundary of apparatus/assembly of apparatus through which electromagnetic fields may

radiate or impinge
Note 1 to entry: See Figure 3 as an example.
3.4
general function circuit
circuitry used in apparatus which does not incorporate safety circuits
Note 1 to entry: See Figure 1 to Figure 3.
---------------------- Page: 11 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)
3.5
port

particular interface of specified apparatus/assembly of apparatus with the external electromagnetic

environment
Note 1 to entry: See Figure 3 as an example.
Key
1 AC power port
2 DC power port
3 enclosure port
4 apparatus/assembly of apparatus
5 ground port
6 signal/control port
7 machine/motor port
Figure 3 — Examples of ports
3.6
safety circuit

circuit containing electronic components forming an electric safety device as defined in EN 81-20

Note 1 to entry: Safety components listed by Annex IV of the Lifts Directive are considered to be safety circuits.

3.7
system

lift escalator or moving walk comprising assembly of apparatus with electrical and electronic

equipment and interconnections
Note 1 to entry: See Figure 1 and Figure 2 as examples.
4 Test procedure

4.1 The tests shall be carried out as stated in EN 61000-4-2:2009, EN 61000-4-3:2006,

EN 61000-4-4:2012, EN 61000-4-5:2014, EN 61000-4-6:2014, EN 61000-4-11:2004, as appropriate

(see Table 1 to Table 7).

An attempt shall be made to maximize the susceptibility by varying the position of the test sample in the

test facility.

4.2 Travelling cables or any other cables likely to be more than 5 m long shall be represented by a

sample of at least 5 m long connected to the relevant port for the purpose of testing for susceptibility.

---------------------- Page: 12 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)

4.3 It is not always possible to measure the immunity levels for every function of the

apparatus/assembly of apparatus. In such cases, the most critical period of operation shall be selected.

4.4 The test shall be carried out at a single set of environmental conditions within the specified

operating range of temperature, humidity, air pressure and supply voltage, unless otherwise indicated

in the standards referred to in 4.1.

4.5 Tests shall be carried out in well-defined and reproducible conditions for each test.

4.6 To facilitate testing, assemblies of apparatus can be tested together. However where apparatus

contain safety circuits, the tests shall prove that the safety circuits comply with the immunity

requirements for all circuits and specific requirements for safety circuits.

This does not imply that those parts of the whole assembly, which are general function circuits, have to

comply with the safety circuit requirements.

4.7 Tests shall be carried out at the following ports of the apparatus or assembly of apparatus where

they exist:
— enclosure port (see Table 1);

— ports for signal and control lines not crossing system boundaries (see Table 2);

— ports for monitoring and remote alarm systems crossing the system boundaries (see Table 3);

— input and output DC power ports with current rating ≤ 100 A (see Table 4);
— input and output DC power ports with current rating > 100 A (see Table 5);

— input and output A.C. power ports with current rating at ≤ 100 A per phase (see Table 6);

— input and output A.C. power ports with current rating > 100 A per phase (see Table 7).

4.8 The configuration and mode of operation during measurement shall be recorded.

4.9 Test values shall be applied as specified in Table 1 to Table 7, and the performance criteria in 6.2

shall be met as appropriate. The tests shall be carried out individually as single tests and in sequence.

EN 55024:2010 shall be applied to telecommunication ports as defined in EN 55022:2010.

5 Applicability of tests

5.1 The application of tests for evaluation of immunity depends on the type of apparatus/assembly of

apparatus, its configuration, ports, technology and operating conditions.

5.2 It might be determined from consideration of the electrical characteristics and usage of a

particular apparatus/assembly of apparatus that some of the tests are inappropriate and therefore

unnecessary. In such a case, the decision and justification not to test shall be recorded.

5.3 Where deviations from the test methods specified in 4.1 are applied, such deviations shall be

justified and recorded.
---------------------- Page: 13 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)
6 Evaluation of tests results
6.1 Introduction

The special requirements of the product family make it necessary to define precise criteria for the

evaluation of the immunity test results.

The basic safety requirements of the system (lift, escalator or moving walk) are specified in EN 81-20

and EN 115-1. For this reason, a performance criterion derived from the immunity levels of

EN 61000-6-1:2007 is deemed sufficient for most functions. However, for safety circuits, where any

malfunction that may produce an unsafe operating mode cannot be tolerated, higher immunity levels

derived from EN 61000-6-2:2005 are stipulated.

If radio equipment is used in combined apparatus/assembly of apparatus, uncontrolled operation of a

transmitter during testing is not allowed.
6.2 Performance criteria

A functional description of the apparatus or assembly of apparatus and a definition of performance

criteria, during or as a consequence of testing shall be recorded.
The definition of performance criteria shall be based on:

Performance criterion A: The apparatus/assembly of apparatus shall continue to operate as intended.

No degradation of performance or loss of function is allowed below a performance level specified by its

manufacturer, when the apparatus or assembly of apparatus is used as intended. In some cases, the

performance level may be replaced by a permissible loss of performance. If the minimum performance

level or the permissible performance loss is not specified by the manufacturer then either of these may

be derived from the product description and documentation and what the user may reasonably expect

from the apparatus or assembly of apparatus if used as intended.

Performance criterion B: The apparatus/assembly of apparatus shall continue to operate as intended

after the test. No degradation of performance or loss of function is allowed below a performance level

specified by its manufacturer, when the apparatus or assembly of apparatus is used as intended. In

some cases the performance level may be replaced by a permissible loss of performance. During the

test, degradation of performance is however allowed. No change of actual operating state or stored data

is allowed. If the minimum performance level or the permissible performance loss is not specified by

the manufacturer then either of these may be derived from the product description and documentation

and what the user may reasonably expect from the apparatus or assembly of apparatus if used as

intended.

Performance criterion C: Temporary loss of function is permitted, provided the function is self-

recoverable or can be restored by the operation of the controls.

Performance criterion D: The apparatus/assembly of apparatus and the associated safety

component(s) shall continue to operate as intended. No degradation of performance or loss of function

is allowed other than a failure into a safe mode.
6.3 Enclosure ports of safety circuits

Where a risk assessment demonstrates that the location of a safety circuit may allow a mobile

telephone or emergency services radio-transmitter to be placed directly beside or on the device, then

the enclosure port of the device shall be implemented so that the performance criterion D is satisfied in

these conditions.
---------------------- Page: 14 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)
7 Documentation for the installer of the apparatus/assembly of apparatus

The installer shall be provided with documentary information and instructions for installation and use

so that compliance with this standard is maintained.
This shall include where applicable:
— instructions for assembly and physical arrangement with other apparatus;
— instructions and precautions for interconnection to other apparatus;
— specifications of interconnection cables and devices;
— instructions for commissioning and testing;

— guidance on avoiding incorrect actions and assembly of apparatus which are known to cause non-

compliance with this standard.
---------------------- Page: 15 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)
Table 1 — Immunity - Enclosure port
Test values Performance criteria
Environmental phenomena Test set-up Units Safety Safety
a a
All circuits b All circuits b
circuits circuits
4 Contact 6 Contact B D
EN 61000-4-2:2009 kV (charge voltage)
Electrostatic discharge
8 Air discharge 15 Air discharge
MHz 80 to 166 80 to 166 D
Radio frequency
V/m (rms, unmodulated) 10
EN 61000-4-3:2006
electromagnetic field
% AM (1 kHz) 80
MHz 166 to 1 000 166 to 1 000 D
Radio frequency
V/m (rms, unmodulated) 10
EN 61000-4-3:2006
electromagnetic field
% AM (1 kHz) 80
MHz 1 429 to 1 516 1 429 to 1 516 D
Radio frequency
V/m (rms, unmodulated) 10
EN 61000-4-3:2006
c 30
electromagnetic field
% AM (1 kHz) 80
MHz 1 710 to 1 785 1 710 to 1 785 D
Radio frequency
V/m (rms, unmodulated) 10
EN 61000-4-3:2006
c 30
electromagnetic field
% AM (1 kHz) 80
MHz 1 840 to 2 170 1 840 to 2 170 D
Radio frequency
V/m (rms, unmodulated) 3
EN 61000-4-3:2006
c 10
electromagnetic field
% AM (1 kHz) 80
MHz 2 300 to 2 655 2 300 to 2 655 D
Radio frequency
V/m (rms, unmodulated) 3
EN 61000-4-3:2006
c 10
electromagnetic field
% AM (1 kHz) 80
Test values for ports containing general function and/or safety circuits.
Test values for ports containing safety circuits.

For the relationship between test levels, protection distances and radiated powers of mobile telephones, EN 61000-4-3:2006.

Field strength may be limited by distance on site, e.g. 200 mm for mobile phones. Therefore, if no RF shielding barrier is used then a physical barrier shall maintain a distance of 200 mm

between the safety circuit and potential sources of perturbation.

If safety circuits are not in a grounded metal box, at least 8 mm of distance between box and circuitry shall be applied to avoid on site damage or other type of insulation shall be used.

If radio equipment as defined by Directive 1999/5/EC is used in apparatus/assembly of apparatus, the exclusion band defined by the harmonised standards applies for that specific radio

equipment.
---------------------- Page: 16 ----------------------
oSIST prEN 12016:2018
prEN 12016:2018 (E)

Table 2 — Immunity - Ports for signal and control lines not crossing installation boundary

Test values Performance criteria
Environmental
Test set-up Units
Safety Safety
a a
phenomena
All circuits
b All circuits b
circuits circuits
kV (peak) 0,5 2,0 B D
Fast transients
T /T (ns) 5/50 5/50
EN 61000-4-4:2012
r h
common mode
5 5
Rep. Frequency (kHz)
f f
Surge T /T (µs) 1,2/50 D
Not relevant Not relevant
r h
- Line to ground +/- 2,0
EN 61000-4-5:2014
kV (peak)
- Line to line +/- 1,0
kV (peak)
MHz 0,15 to 80 0,15 to 80 D
Rad
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.