EN 10264-4:2012
(Main)Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
This part of this European Standard specifies the characteristics of stainless steel wire for the manufacture of ropes that are exposed to corrosion and in some cases to a moderate temperature.
This part of this European Standard specifies the following for stainless steel wire for ropes:
- dimensional tolerances;
- mechanical characteristics;
- requirements relating to the chemical composition of the stainless steel wire;
- conditions to be satisfied by any coating.
Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 4: Draht aus nichtrostendem Stahl
Dieser Teil der Europäischen Norm legt Anforderungen an Draht aus nichtrostendem Stahl fest, der für Seile verwendet wird, die korrosiven Einflüssen und in einigen Fällen mäßig hohen Temperaturen ausgesetzt sind.
Dieser Teil der Europäischen Norm legt zu folgenden Punkten Anforderungen an Seildraht aus nichtrostendem Stahl fest:
- Maßtoleranzen;
- mechanische Eigenschaften;
- Anforderungen an die chemische Zusammensetzung des nichtrostenden Stahldrahts;
- Anforderungen an Überzüge.
Fils et produits tréfilés en acier - Fils pour câbles - Partie 4: Fils tréfilés en acier inoxydable
La présente partie de la présente Norme européenne spécifie les caractéristiques des fils tréfilés en acier
inoxydable pour la fabrication de câbles qui sont exposés à la corrosion et dans certains cas à une
température modérée.
Cette partie de la présente Norme européenne spécifie pour les fils tréfilés en acier inoxydable pour câbles
- les tolérances dimensionnelles ;
- les caractéristiques mécaniques ;
- les exigences relatives à la composition chimique des fils tréfilés en acier inoxydable ;
- les conditions auxquelles un revêtement éventuel doit satisfaire.
Jeklena žica in žični izdelki - Jeklena žica za vrvi - 4. del: Nerjavna jeklena žica
Ta del tega evropskega standarda določa značilnosti nerjavne jeklene žice za proizvodnjo vrvi, ki so izpostavljene koroziji in v nekaterih primerih zmerni temperaturi. Ta del tega evropskega standarda določa naslednje zahteve za nerjavno jekleno žico za vrvi: – tolerance mer; – mehanske značilnosti; – zahteve, povezane s kemijsko sestavo nerjavne jeklene žice; – pogoji, ki jih morajo izpolnjevati premazi.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 4: Draht aus nichtrostendem StahlFils et produits tréfilés en acier - Fils pour câbles - Partie 4: Fils tréfilés en acier inoxydableSteel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains77.140.20Visokokakovostna jeklaStainless steelsICS:Ta slovenski standard je istoveten z:EN 10264-4:2012SIST EN 10264-4:2012en,fr,de01-marec-2012SIST EN 10264-4:2012SLOVENSKI
STANDARDSIST EN 10264-4:20031DGRPHãþD
SIST EN 10264-4:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10264-4
January 2012 ICS 77.140.65; 77.140.20 Supersedes EN 10264-4:2002English Version
Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
Fils et produits tréfilés en acier - Fils pour câbles - Partie 4: Fils tréfilés en acier inoxydable
Stahldraht und Drahterzeugnisse - Stahldraht für Seile - Teil 4: Draht aus nichtrostendem Stahl This European Standard was approved by CEN on 19 November 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10264-4:2012: ESIST EN 10264-4:2012
EN 10264-4:2012 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Designation of product .44 General conditions of manufacture .44.1 Main steel grades and characteristic applications .44.2 Chemical composition .54.3 Surface condition.55 Characteristics and requirements .65.1 Tensile strength .65.2 Diameter tolerances .65.3 Ductility .75.4 Magnetic permeability .76 Test methods .76.1 General .76.2 Dimension of wire .76.3 Tensile
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.