Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications

This Part of this European Standard specifies the particular materials, manufacturing and testing requirements for
ropes for general lifting applications.
The particular hazards covered by this Part are identified in Clause 4.
This Part of this European Standard does not establish requirements for information for use other than those given
in clause 7 of Part 1. Neither does it cover the requirements for ropes fitted with terminations.
Minimum breaking force values for the more common classes, sizes and grades of rope are provided in tables 5 to
17.

Drahtseile aus Stahldraht - Sicherheit - Teil 4: Litzenseile für allgemeine Hebezwecke

Dieser Teil dieser Europäischen Norm legt die besonderen Anforderungen an Werkstoffe, Herstellung und Prüfung für Litzenseile für allgemeine Hebezwecke fest.
Die besonderen Gefährdungen, die in diesem Teil behandelt werden, sind in Abschnitt 4 angegeben.
Dieser Teil dieser Europäischen Norm legt über die Anforderungen in Teil 1, Abschnitt 7, hinausgehend keine weiteren Anforderungen an Anwendungshinweise fest. Er enthält auch keine Anforderungen an Seile mit Endverbindungen.
Mindestbruchkräfte für die gebräuchlicheren Seilklassen, Durchmesser und Seilfestigkeitsklassen sind in den Tabellen 5 bis 17 angegeben.

Câbles en acier - Sécurité - Partie 4: Câbles à torons pour applications de levage générales

La présente partie de cette Norme européenne spécifie les matériaux particuliers, les prescriptions pour la fabrication
et les essais des câbles toronnés pour les applications générales de levage.
Les phénomènes dangereux particuliers couverts par la présente partie sont identifiés à l’article 4.
La présente partie de cette Norme européenne ne donne pas de prescriptions relatives à l’information pour l’utilisation
autres que celles données à l’article 7 de la partie 1. Elle ne couvre pas non plus les prescriptions pour les câbles
munis de terminaisons.
Les valeurs de charges de rupture minimales pour les classes, les dimensions et les catégories de câble les plus
courantes sont fournies dans les Tableaux 5 à 17.

Jeklene žične vrvi - Varnost - 4. del: Pramenaste vrvi za splošne dvigalne namene

General Information

Status
Published
Publication Date
18-Mar-2008
Withdrawal Date
27-Dec-2009
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
04-Jun-2023
Completion Date
04-Jun-2023

Relations

Buy Standard

Standard
EN 12385-4:2003+A1:2008
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applicationsCâbles en acier - Sécurité - Partie 4: Câbles à torons pour applications de levage généralesDrahtseile aus Stahldraht - Sicherheit - Teil 4: Litzenseile für allgemeine HebezweckeTa slovenski standard je istoveten z:EN 12385-4:2002+A1:2008SIST EN 12385-4:2003+A1:2008en,fr77.140.65ICS:SLOVENSKI
STANDARDSIST EN 12385-4:2003+A1:200801-junij-2008







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12385-4:2002+A1
March 2008 ICS 77.140.65 Supersedes EN 12385-4:2002 English Version
Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
Câbles en acier - Sécurité - Partie 4: Câbles à torons pour applications de levage générales
Drahtseile aus Stahldraht - Sicherheit - Teil 4: Litzenseile für allgemeine Hebezwecke This European Standard was approved by CEN on 12 November 2001, includes Amendment 1 approved by CEN on 14 February 2008 and includes Corrigendum 1 issued by CEN on 19 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12385-4:2002+A1:2008: E



EN 12385-4:2002+A1:2008 (E) 2 Contents
page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Hazards.5 5 Safety requirements and/or measures.5 6 Verification of safety requirements and/or measures.8 7 Information for use.8 Annex A (normative) Calculation of minimum breaking force for those ropes covered by Tables 5 to 17.22 Annex B (normative) Summary of factors for calculations.23 Annex C (informative) Calculation of approximate nominal length mass of ropes over 60mm diameter.24 Annex D (informative) Information which should be provided with an enquiry or an order.25 Annex ZA (informative) !!!!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.26 Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC.27 Bibliography.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.