iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

ENV 13670-1:2000

(Main)

Execution of concrete structures - Part 1: Common

Execution of concrete structures - Part 1: Common

This European Prestandard gives common requirements for execution of concrete structures. In particular, this part gives requirements for structures designed according to ENV 1992-1 and for the concrete part of composite structures designed according to ENV 1994-1. In the case of civil engineering works, different oradditional requirements need to be considered and, if required, given in the project specification. This prestandard permits the project specification to state specific requirements relevant the particular structure. This prestandard is applicable to temporary as well as permanent concrete structures.

Izvajanje betonskih konstrukcij - 1. del: Splošno

General Information

Status
Withdrawn
Publication Date
18-Jan-2000
Withdrawal Date
01-Dec-2009
ICS
91.010.30 - Technical aspects
91.080.40 - Concrete structures
Technical Committee
CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
Drafting Committee
CEN/TC 104/SC 2 - Execution of concrete structures
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
02-Dec-2009
Completion Date
02-Dec-2009
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST ENV 13670-1:2003 - Execution of concrete structures - Part 1: Common

Relations

Replaced By
EN 13670:2009 - Execution of concrete structures
Effective Date
08-Jun-2022
Revised
prEN 13670 - Execution of concrete structures
Effective Date
08-Jun-2022

Buy Standard

ENV 13670-1:2003ENV 13670-1:2003
PreviousNext
Standardization document
ENV 13670-1:2003
English language
60 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 13670-1:2003
01-marec-2003
Izvajanje betonskih konstrukcij - 1. del: Splošno
Execution of concrete structures - Part 1: Common
Ta slovenski standard je istoveten z: ENV 13670-1:2000
ICS:
91.080.40 Betonske konstrukcije Concrete structures
SIST ENV 13670-1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 2 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 3 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 4 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 5 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 6 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 7 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 8 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 9 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 10 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 11 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 12 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 13 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 14 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 15 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 16 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 17 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 18 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 19 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 20 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 21 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 22 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 23 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 24 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 25 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 26 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 27 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 28 ----------------------

SIST ENV 13670-1:2003

---------------------- Page: 29 ------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13670:2009(Main)
Execution of concrete structures
SIST EN 13670:2010

(1)   This European Standard gives common requirements for execution of concrete structures, it applies to both in-situ works and construction using prefabricated concrete elements.
(2)   This standard expects the execution specification to state all the specific requirements relevant to the particular structure.
(3)   This standard is applicable to permanent as well as temporary concrete structures.
(4)   Additional or different requirements should be considered and, if required, given in the execution specification when using:
a)   lightweight aggregate concrete;
b)   other materials (e.g. fibres) or constituent materials;
c)   special technologies/innovative designs.
(5)   This standard does not apply to concrete members used only as equipment or construction aids for the execution.
(6)   This standard does not cover the specification, production and conformity of concrete.
(7)   This standard is not applicable to the production of precast concrete elements made in accordance with product standards.
(8)   This standard does not cover safety and health aspects of execution, or third party safety requirements.
(9)   This standard does not cover contractual issues or responsibilities for the identified actions.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    66 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13584:2003(Main)
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products
SIST EN 13584:2003

This European Standard specifies a method for measuring creep under compressive load in products and systems for the repair of concrete structures, as defined in prEN 1504-3.The method is suitable for repair mortars and concretes with polymer binders (PC) and repair grouts, mortars and concretes with hydraulic binders (CC) and polymer cement binders (PCC).

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1542:1999(Main)
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
SIST EN 1542:2000

This European Standard is one of a series dealing with products and systems for the protection and repair of concrete structures. It specifies a method for measuring the tensile bond strength of grouts, mortars, concretes and surface protection systems (SPS) used for the protection and repair of concrete. The provisions of the standard are applicable to products and systems applied to a maximum thickness of 50 mm.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 19103:2021(Main)
Eurocode 5: Design of Timber Structures - Structural design of timber-concrete composite structures - Common rules and rules for buildings
SIST-TS CEN/TS 19103:2022

1.1   Scope of CEN/TS 19103
(1)   CEN/TS 19103 gives general design rules for timber-concrete composite structures.
(2)   It provides requirements for materials, design parameters, connections, detailing and execution for timber-concrete composite structures. Recommendations for environmental parameters (temperature and moisture content), design methods and test methods are given in the Annexes.
(3)   It includes rules common to many types of timber-concrete composite, but does not include details for the design of glued timber-concrete composites, nor for bridges.
NOTE   For the design of glued timber-concrete composites or bridges alternative references are available.
(4)   It covers the design of timber-concrete composite structures in both quasi-constant and variable environmental conditions. For ease of use, it provides simple design rules for quasi-constant environmental conditions and more complex rules for variable environmental conditions.
1.2   Assumptions
(1)   The general assumptions of EN 1990 apply.
(2)   CEN/TS 19103 is intended to be used in conjunction with EN 1990, EN 1991 (all parts), EN  1992 (all parts), EN  1994 (all parts), EN 1995 (all parts), EN 1998 (all parts) when timber structures are built in seismic regions, and ENs for construction products relevant to timber structures.

  • Technical specification
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1992-1-2:2004/A1:2019(Amendment)
Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
SIST EN 1992-1-2:2005/A1:2019

DOP of 12 months!

  • Amendment
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1992-4:2018(Main)
Eurocode 2 - Design of concrete structures - Part 4: Design of fastenings for use in concrete
SIST EN 1992-4:2018

1.1   General
(1) This European Standard provides a design method for fastenings (connection of structural elements and non-structural elements to structural components), which are used to transmit actions to the concrete. This design method uses physical models which are based on a combination of tests and numerical analysis consistent with EN 1990:2002, 5.2.
The requirements for the transmission of the fastener loads within the concrete member to its supports are given in EN 1992-1-1 and Annex A of this EN.
Inserts embedded in precast concrete elements during production, under Factory Production Control (FPC) conditions and with the due reinforcement, intended for use only during transient situations for lifting and handling, are covered by CEN/TR 15728.
(2) This EN is intended for safety related applications in which the failure of fastenings may result in collapse or partial collapse of the structure, cause risk to human life or lead to significant economic loss. In this context it also covers non-structural elements.
(3) The support of the fixture can be either statically determinate or statically indeterminate. Each support can consist of one fastener or a group of fasteners.
(4) This EN is valid for applications which fall within the scope of the EN 1992 series. In applications where special considerations apply, e.g. nuclear power plants or civil defence structures, modifications can be necessary.
(5) This EN does not cover the design of the fixture. The requirements for the design of the fixture are given in the appropriate Standards and fulfil the requirements on the fixture as given in this EN.
(6) This document relies on characteristic resistances and distances which are stated in a European Technical Product Specification (see Annex E). At least the characteristics of Annex E are given in a European Technical Product Specification for the corresponding loading conditions providing a basis for the design methods of this EN.
NOTE   The numerical values for certain parameters given in Notes can be used for pre-dimensioning. The values for verification are given in the European Technical Product Specifications and may be different.
1.2   Type of fasteners and fastening groups
(1)   This EN uses the fastener design theory ) (see Figure 1.1) and applies to:
a)   cast-in fasteners such as headed fasteners, anchor channels with rigid connection (e.g. welded, forged) between anchor and channel;
b)   post-installed mechanical fasteners such as expansion fasteners, undercut fasteners and concrete screws;
c)   post-installed bonded fasteners and bonded expansion fasteners.
(2)   For other types of fasteners modifications of the design provisions can be necessary.
(3)   This EN applies to fasteners with established suitability for the specified application in concrete covered by provisions, which refer to this EN and provide data required by this EN. The suitability of the fastener is stated in the relevant European Technical Product Specification.
(...)
(4)   This EN applies to single fasteners and groups of fasteners. In a group of fasteners the loads are applied to the individual fasteners of the group by means of a common fixture. In a group of fasteners this European Standard applies only if fasteners of the same type and size are used.
(5)   The configurations of fastenings with cast-in place headed fasteners and post-installed fasteners covered by this EN are shown in Figure 1.2.
(6)   For anchor channels the number of anchors is not limited.
(...)
(7)   Post-installed ribbed reinforcing bars used to connect concrete members are covered by a European Technical Product Specification. This EN applies when connections are designed in accordance with EN 1992-1-1.
1.3   Fastener dimensions and materials
(1)   This EN applies to fasteners with a minimum diameter or a minimum thread size of 6 mm (M6) or a corresponding cross section. (....)

  • Standard
    129 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1992-1-1:2004/A1:2014(Amendment)
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
SIST EN 1992-1-1:2005/A1:2015

General rules for the structural design of buildings and civil engineering works in reinforced and prestressed concrete made with normal and lightweight aggregates, plain or lightly reinforced concrete and precast concrete for the design of reinforced concrete components with unbonded tendons.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1994-1-2:2005/A1:2014(Amendment)
Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
SIST EN 1994-1-2:2006/A1:2014

Supplementary to Part 1-1. Additional and varied rules to be used for the design of composite structures which are required to avoid premature structural collapse and to limit the spread of fire in the accidental situation of exposure to fire.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1992-1-1:2004/AC:2010(Corrigendum)
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
SIST EN 1992-1-1:2005/AC:2011

General rules for the structural design of buildings and civil engineering works in reinforced and prestressed concrete made with normal and lightweight aggregates, plain or lightly reinforced concrete and precast concrete for the design of reinforced concrete components with unbonded tendons.

  • Corrigendum
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13670:2009(Main)
Execution of concrete structures
SIST EN 13670:2010

(1)   This European Standard gives common requirements for execution of concrete structures, it applies to both in-situ works and construction using prefabricated concrete elements.
(2)   This standard expects the execution specification to state all the specific requirements relevant to the particular structure.
(3)   This standard is applicable to permanent as well as temporary concrete structures.
(4)   Additional or different requirements should be considered and, if required, given in the execution specification when using:
a)   lightweight aggregate concrete;
b)   other materials (e.g. fibres) or constituent materials;
c)   special technologies/innovative designs.
(5)   This standard does not apply to concrete members used only as equipment or construction aids for the execution.
(6)   This standard does not cover the specification, production and conformity of concrete.
(7)   This standard is not applicable to the production of precast concrete elements made in accordance with product standards.
(8)   This standard does not cover safety and health aspects of execution, or third party safety requirements.
(9)   This standard does not cover contractual issues or responsibilities for the identified actions.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    66 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day