EN ISO 11553-1:2005

Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)

This Standard describes hazards generated by laser processing machines and specifies the safety requirements relating to radiation hazards and hazards generated by materials and substances. It also specifies the information to be supplied by the manufacturer of such equipment.

Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 1: Allgemeine Sicherheitsanforderungen (ISO 11553-1:2005)

Dieser Teil von ISO 11553 beschreibt Gefährdungen, die durch Laserbearbeitungsmaschinen nach 3.2 hervorgerufen werden, und legt nur die Sicherheitsanforderungen hinsichtlich elektro-magnetischer Strahlungsgefährdungen und durch Materialien und Substanzen erzeugter Gefährdungen fest. Er legt auch die Informationen fest, die von den Herstellern solcher Anlagen mitgeliefert werden müssen.
Anforderungen an die Beseitigung oder Verminderung von Risiken durch Lärm sind nicht in dieser Norm enthalten. Diese Anforderungen sollen in einer späteren Änderung eingeführt werden.
Er ist nicht anwendbar auf Laserprodukte oder Einrichtungen, die solche Produkte beinhalten, die alleinig und ausdrücklich für die folgenden Anwendungen hergestellt werden:
-   Photolithographie;
-   Stereolithographie;
-               Holographie;
-   Medizinische Anwendungen (nach IEC 60601 2 22);
-   Datenspeicherung.

Sécurité des machines - Machines à laser - Partie 1: Prescriptions générales de sécurité (ISO 11553-1:2005)

Varnost strojev - Laserski obdelovalni stroji - 1. del: Splošne varnostne zahteve (ISO 11553-1:2005)

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2005
• Withdrawal Date: 25-Nov-2008
• ICS: 13.110 - Safety of machinery
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CEN/TC 123 - Lasers and photonics
• Drafting Committee: CEN/TC 123 - Lasers and photonics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 26-Nov-2008
• Completion Date: 26-Nov-2008
• Directive: 98/37/EC - Machinery
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: SIST EN ISO 11553-1:2005 - Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)

Relations

• Replaces: EN 12626:1997 - Safety of machinery - Laser processing machines - Safety requirements (ISO 11553:1996 modified)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 11553-1:2008 - Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11553-1:2005
01-junij-2005
1DGRPHãþD
SIST EN 12626:1998
Varnost strojev - Laserski obdelovalni stroji - 1. del: Splošne varnostne zahteve
(ISO 11553-1:2005)
Safety of machinery - Laser processing machines - Part 1: General safety requirements
(ISO 11553-1:2005)
Sicherheit von Maschinen - Laserbearbeitungsmaschinen - Teil 1: Allgemeine
Sicherheitsanforderungen (ISO 11553-1:2005)
Sécurité des machines - Machines a laser - Partie 1: Prescriptions générales de sécurité
(ISO 11553-1:2005)
Ta slovenski standard je istoveten z: EN ISO 11553-1:2005
ICS:
13.110 Varnost strojev Safety of machinery
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN ISO 11553-1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 11553-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2005
ICS 31.260; 13.110 Supersedes EN 12626:1997
English version
Safety of machinery - Laser processing machines - Part 1:
General safety requirements (ISO 11553-1:2005)
Sécurité des machines - Machines à laser - Partie 1: Sicherheit von Maschinen - Laserbearbeitungsmaschinen -
Prescriptions générales de sécurité (ISO 11553-1:2005) Teil 1: Allgemeine Sicherheitsanforderungen (ISO 11553-
1:2005)
This European Standard was approved by CEN on 24 December 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11553-1:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 11553-1:2005 (E)





Foreword


This document (EN ISO 11553-1:2005) has been prepared by Technical Committee ISO/TC 172
"Optics and optical instruments" in collaboration with Technical Committee CEN/TC 123 "Lasers
and laser-related equipment", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2005, and conflicting national
standards shall be withdrawn at the latest by August 2005.

This document supersedes EN 12626:1997.

This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 11553-1:2005 has been approved by CEN as EN ISO 11553-1:2005 without any
modifications.

2

---------------------- Page: 3 ----------------------

EN ISO 11553-1:2005 (E)




ANNEX ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37 EEC


This European Standard has been prepared under a mandate given to CEN by the European

Commission and the European Free Trade Association to provide a means of conforming to
Essential Requirements of the New Approach Directive 98/37 EEC.

Once this standard is cited in the Official Journal of the European Communities under that
Directive and has been implemented as a national standard in at least one Member State,
compliance with the normative clauses
...