Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2022)

This document establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It specifies symbols and abbreviated terms used to identify thermoplastic elastomers in industry, commerce, and government. It is not intended to conflict with, but to supplement, existing trade names and trademarks.
NOTE 1   The name of the thermoplastic elastomer is intended to be used in technical papers and presentations followed by the abbreviated term used to designate the elastomer in this document.
NOTE 2   Annex A gives thermoplastic-elastomer abbreviated terms that have been used in the past in materials standards, technical bulletins, textbooks, patents, and trade literature.

Thermoplastische Elastomere - Nomenklatur und Kurzzeichen (ISO 18064:2022)

Dieses Dokument legt ein Nomenklatursystem für thermoplastische Elastomere auf der Grundlage der chemischen Zusammensetzung des bzw. der betreffenden Polymere fest. Es legt die zum Identifizieren thermoplastischer Elastomere in der Industrie, im Handel und auf Regierungsebene verwendeten Symbole und Kurzzeichen fest. Ziel ist es nicht, mit bestehenden Handelsnamen und (geschützten) Warenzeichen in Konflikt zu kommen, sondern diese zu ergänzen.
ANMERKUNG 1   In technischen Dokumenten und Präsentationen soll der Name des thermoplastischen Elastomers gefolgt von dem in diesem Dokument zum Bezeichnen des Elastomers verwendeten Kurzzeichen verwendet werden.
ANMERKUNG 2   Anhang A gibt Kurzzeichen für thermoplastische Elastomere an, die in der Vergangenheit in Werk¬stoffnormen, technischen Bulletins, Lehrbüchern, Patenten und der Fachliteratur verwendet wurden.

Élastomères thermoplastiques - Nomenclature et termes abrégés (ISO 18064:2022)

Le présent document établit un système de nomenclature des élastomères thermoplastiques fondé sur la composition chimique du polymère ou des polymères concernés. Il spécifie les symboles et les termes abrégés utilisés pour identifier les élastomères thermoplastiques dans l'industrie, le commerce et le secteur public. Il est destiné à compléter plutôt qu'à concurrencer les dénominations commerciales et les marques de commerce existantes.
NOTE 1      Le nom de l'élastomère thermoplastique est destiné à être utilisé dans les documents et présentations techniques, suivi du terme abrégé utilisé pour désigner l’élastomère dans le présent document.
NOTE 2      L'Annexe A donne les termes abrégés des élastomères thermoplastiques utilisés par le passé dans des normes relatives aux matériaux, dans des bulletins techniques, dans des livres scolaires, dans des brevets et dans des documentations commerciales.

Plastomerni elastomeri - Nomenklatura in okrajšave (ISO 18064:2022)

Ta dokument vzpostavlja sistem nomenklature za plastomerne elastomere na osnovi kemične sestave določenega polimera oziroma polimerov. Določa simbole in okrajšave izrazov, ki se uporabljajo za označevanje plastomernih elastomerov v industrijskem, trgovinskem in vladnem sektorju. Njegov namen ni nasprotovati obstoječim trgovskim imenom in blagovnim znamkam, temveč jih dopolniti.
OPOMBA 1: Ime plastomernega elastomera se predvidoma uporablja v tehničnih dokumentih in predstavitvah, sledi pa mu okrajšava izraza, ki se uporablja za označevanje elastomera v zadevnem dokumentu.
OPOMBA 2: V dodatku A so navedene okrajšave izrazov za plastomerne elastomere, ki so se v preteklosti uporabljale v standardih za materiale, tehničnih biltenih, učbenikih, patentih in strokovni literaturi.

General Information

Status
Published
Publication Date
03-May-2022
Withdrawal Date
29-Nov-2022
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
04-May-2022
Completion Date
04-May-2022

Relations

Buy Standard

Standard
EN ISO 18064:2022
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2022
Nadomešča:
SIST EN ISO 18064:2015
Plastomerni elastomeri - Nomenklatura in okrajšave (ISO 18064:2022)
Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2022)
Thermoplastische Elastomere - Nomenklatur und Kurzzeichen (ISO 18064:2022)
Élastomères thermoplastiques - Nomenclature et termes abrégés (ISO 18064:2022)
Ta slovenski standard je istoveten z: EN ISO 18064:2022
ICS:
01.040.83 Gumarska industrija in Rubber and plastics
industrija polimernih industries (Vocabularies)
materialov (Slovarji)
83.080.20 Plastomeri Thermoplastic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 18064
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 01.040.83; 83.080.20 Supersedes EN ISO 18064:2014
English Version
Thermoplastic elastomers - Nomenclature and
abbreviated terms (ISO 18064:2022)
Élastomères thermoplastiques - Nomenclature et Thermoplastische Elastomere - Nomenklatur und
termes abrégés (ISO 18064:2022) Kurzzeichen (ISO 18064:2022)
This European Standard was approved by CEN on 13 April 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18064:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 18064:2022) has been prepared by Technical Committee ISO/TC 45 "Rubber
and rubber products" in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat
of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards
shall be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 18064:2014.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 18064:2022 has been approved by CEN as EN ISO 18064:2022 without any modification.

INTERNATIONAL ISO
STANDARD 18064
Third edition
2022-04
Thermoplastic elastomers —
Nomenclature and abbreviated terms
Élastomères thermoplastiques — Nomenclature et termes abrégés
Reference number
ISO 18064:2022(E)
ISO 18064:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 18064:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Nomenclature system . 1
5 Categories of thermoplastic elastomer . 2
5.1 TPA . 2
5.2 TPC . 2
5.3 TPO . 2
5.4 TPS . 2
5.5 TPU . 2
5.6 TPV . 2
5.7 TPZ . 2
6 Materials in each TPE category . 3
6.1 TPA . 3
6.2 TPC . 3
6.3 TPO . 3
6.4 TPS . 3
6.5 TPU . 4
6.6 TPV . 4
6.7 Miscellaneous material (TPZ) . 4
Annex A (informative) Formerly used abbreviated terms . 5
Bibliography . 7
iii
ISO 18064:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC
249, Plastics, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
This third edition cancels and replaces the second edition (ISO 18064:2014), which has been technically
revised.
The main changes are as follows:
— inclusion of TPO co-polymers;
— differentiation between single polymers and compounds;
— unification of expressions.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO 18064:2022(E)
Introduction
Thermoplastic elastomers combine many of the attributes and features of both vulcanized thermoset
rubber and thermoplastic materials. It is, therefore, important that any system of classification and
nomenclature for this rapidly expanding polymer sector be acceptable to both the rubber and plastics
industries. Neither of the existing International Standards for the nomenclature and abbreviated terms
for rubber (ISO 1629) and for plastics (ISO 1043-1) is suitable for this purpose. The system in this
document has been devised to avoid any conflict or ambiguity, permit the use of existing terms in the
construction of abbreviated terms for thermoplastic elastomers, and allow for future developments or
expansion.
This document uses established abbreviated terms. Its aim is both to prevent the occurrence of m
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.