01.040.83 - Rubber and plastics industries (Vocabularies)

This document establishes a vocabulary of and is limited to those terms in general use throughout the rubber industry. It does not define terms intended for particular rubber products, some of which are given in the vocabulary standards listed in the Bibliography. It does not define terms that are generally understood or adequately defined in other readily available sources such as general dictionaries. The terms are listed in the alphabetical order of the English terms, with an index to the cor...view more

2012-04-25 EMA: WI deleted due to cancellation of equivalent ISO project.

2012-04-25 EMA: WI deleted due to cancellation of equivalent ISO project.

ISO 4223-1:2017 defines a number of significant terms related to pneumatic tyres used in the tyre industry, together with corresponding codes, symbols and values. NOTE 1 For other terms used in this field and their equivalents in other languages, see ISO 3877 (all parts). For terms and definitions relating to wheels/rims, see ISO 3911. NOTE 2 Annex A forms a normative part of this document.

ISO 6472:2017 establishes unambiguous abbreviated terms for commonly used rubber compounding ingredients of known, specific chemical composition.

This European Standard defines terms used in the adhesive industry and terms relating to adhesives in those industries that use adhesives.

This European Standard defines terms used in the adhesive industry and terms relating to adhesives in those industries that use adhesives.

This International Standard establishes a nomenclature system for thermoplastic elastomers based on
the chemical composition of the polymer or polymers involved. It defines symbols and abbreviated terms
used to identify thermoplastic elastomers in industry, commerce, and government. It is not intended to
conflict with, but to supplement, existing trade names and trademarks.

ISO 18064:2014 establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It defines symbols and abbreviated terms used to identify thermoplastic elastomers in industry, commerce, and government. It is not intended to conflict with, but to supplement, existing trade names and trademarks.

ISO 18064:2014 establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It defines symbols and abbreviated terms used to identify thermoplastic elastomers in industry, commerce, and government. It is not intended to conflict with, but to supplement, existing trade names and trademarks.

This International Standard defines terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61), and general terms and definitions of polymer science used in all aspects of plastics technology.

ISO 1629:2013 establishes a system of symbols for the basic rubbers in both dry and latex forms, based on the chemical composition of the polymer chain. The purpose is to standardize the abbreviated terms used in industry, commerce and government, and it is not intended to conflict with, but rather to act as a supplement to, existing trade names and trademarks.

ISO 472:2013 defines terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61) and general terms and definitions of polymer science used in all aspects of plastics technology.
In addition to terms in English and French (two of the three official ISO languages), this vocabulary includes the equivalent terms in German; these have been included under the responsibility of the member body for Germany (DIN). However, only the terms and defini...view more

ISO 16589-2:2011 establishes the vocabulary for seals utilizing sealing elements manufactured from suitably formulated compounds, based on thermoplastic materials, such as polytetrafluoroethylene (PTFE) that are considered suitable for use under low-pressure conditions.

ISO 1043-1:2011 defines abbreviated terms for the basic polymers used in plastics, symbols for components of these terms, and symbols for special characteristics of plastics. It includes only those abbreviated terms that have come into established use and its aim is both to prevent the occurrence of more than one abbreviated term for a given plastic and to prevent a given abbreviated term being interpreted in more than one way.
Guidance for the preparation of new abbreviated terms, reference li...view more

ISO 8153-1:2009 defines terms used for all types of hose assemblies. General terms can be made more precise through the addition of supplementary terminology relating to the design, range of application and/or the material of the hose/hose assembly. Terms and definitions specific to metallic hose assemblies are given in ISO 7369.

This European Standard specifies definitions and requirements applicable to structural adhesives whose storage life is limited by possible change of properties.
NOTE  Structural adhesives and their related materials are herein referred to as "adhesives".

This standard lists and defines terms used in the adhesive tapes industry and terms and definitions relating to adhesive tapes in those industries that use adhesive tapes. Electrical and medical adhesive tapes are not covered by this standard. NOTE In addition to terms used in the three official CEN/CENELEC languages (English, French and German), this European standard gives the equivalent terms in the Italian and Spanish languages in an informative annex ; these are published under the responsi...view more