EN 61514-2:2004
(Main)Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
specifies design reviews and tests intended to measure and determine the static and dynamic performance, the degree of intelligence and the communication capabilities of single-acting or double-acting intelligent valve positioners. The tests may be applied to positioners which receive standard analogue electrical input signals (as specified in EN 60381) and/or digital signals via a data communication link and have a pneumatic output. An intelligent valve positioner as defined in Clause 3 is an instrument that uses for performing its functions digital techniques for data processing, decision-making and bi-directional communication. It may be equipped with additional sensors and additional functionality supporting the main function.
Systeme der industriellen Prozessleittechnik - Teil 2: Verfahren zur Bewertung des Betriebsverhaltens von intelligenten Ventilstellungsreglern mit pneumatischem Ausgang
Systèmes de commande des processus industriels - Partie 2: Méthodes d'évaluation des performances des positionneurs de vanne intelligents à sorties pneumatiques
specifies design reviews and tests intended to measure and determine the static and dynamic performance, the degree of intelligence and the communication capabilities of single-acting or double-acting intelligent valve positioners. The tests may be applied to positioners which receive standard analogue electrical input signals (as specified in EN 60381) and/or digital signals via a data communication link and have a pneumatic output. An intelligent valve positioner as defined in Clause 3 is an instrument that uses for performing its functions digital techniques for data processing, decision-making and bi-directional communication. It may be equipped with additional sensors and additional functionality supporting the main function.
Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 61514-2:2004
STANDARD
junij 2004
Industrial process control systems - Part 2: Methods of evaluating the performance
of intelligent valve positioners with pneumatic outputs
ICS 23.060.40; 25.040.40 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 61514-2
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2004
ICS 23.060; 25.040.40
English version
Industrial process control systems
Part 2: Methods of evaluating the performance
of intelligent valve positioners
with pneumatic outputs
(IEC 61514-2:2004)
Systèmes de commande des processus Systeme der industriellen
industriels Prozessleittechnik
Partie 2 : Méthodes d'évaluation Teil 2: Verfahren zur Bewertung
des performances des positionneurs des Betriebsverhaltens von
de vanne intelligents à sorties intelligenten Ventilstellungsreglern
pneumatiques mit pneumatischem Ausgang
(CEI 61514-2:2004) (IEC 61514-2:2004)
This European Standard was approved by CENELEC on 2004-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61514-2:2004 E
Foreword
The text of document 65B/515/FDIS, future edition 1 of IEC 61514-2, prepared by SC 65B, Devices, of
IEC TC 65, Industrial-process measurement and control, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 61514-2 on 2004-03-01.
This standard is to be read in conjunction with EN 61514:2002.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61514-2:2004 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61514-2:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-351 1998 International Electrotechnical Vocabulary- -
Part 351: Automatic control
IEC 60068-2-1 1990 Environmental testing EN 60068-2-1 1993
Part 2: Tests - Tests A: Cold
1)
IEC 60068-2-2 1974 Part 2: Tests - Tests B: Dry heat EN 60068-2-2 1988
IEC 60068-2-6 1995 Part 2: Tests - Test Fc: Vibration
+ corr. March 1995 (sinusoidal) EN 60068-2-6 1995
2)
IEC 60068-2-31 1969 Part 2: Tests - Test Ec: Drop and topple, EN 60068-2-31 1993
primarily for equipment-type specimens
IEC 60068-2-78 2001 Part 2-78: Tests - Test Cab: Damp heat, EN 60068-2-78 2001
steady state
IEC 60079 Series Electrical apparatus for explosive gas EN 60079 Series
atmospheres
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code) + corr. May 1993
3) 4)
IEC 60534-1 - Industrial-process control valves EN 60534-1 1993
Part 1: Control valve terminology and
general considerations
IEC 60654 Series Operating conditions for industrial- EN 60654 Series
process measurement and control
equipment
IEC 60721-3 Series Classification of environmental conditions EN 60721-3 Series
Part 3: Classification of groups of
environmental parameters and their
severities
1)
EN 60068-2-2 includes supplement A:1976 to IEC 60068-2-2.
2)
EN 60068-2-31 includes A1:1982 to IEC 60068-2-31.
3)
Undated reference.
4)
Valid edition at date of issue.
Publication Year Title EN/HD Year
3) 4)
IEC 61000-4-11 - Electromagnetic compatibility (EMC) EN 61000-4-11 1994
Part 4-11: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests
IEC 61010-1 2001 Safety requirements for electrical EN 61010-1 2001
equipment for measurement, control, and + corr. June 2002
laboratory use
Part 1: General requirements
IEC 61032 1997 Protection of persons and equipment by EN 61032 1998
enclosures - Probes for verification
IEC 61069 Series Industrial-process measurement and EN 61069 Series
control - Evaluation of system properties
for the purpose of system assessment
IEC 61158 Series Digital data communications for EN 61158 Series
measurement and control - Fieldbus for
use in industrial control systems
IEC 61298 Series Process measurement and control EN 61298-4 Series
devices - General methods and
procedures for evaluating performance
Part 4: Evaluation report content
IEC 61326 2002 Electrical equipment for measurement, EN 61326 1997
control and laboratory use - EMC A1 1998
requirements A2 2001
A3 2003
IEC/PAS 61499 Series Function blocks for industrial-process - -
measurement and control systems
IEC 61514 (mod) 2000 Industrial-process control systems - EN 61514 2002
Methods of evaluating the performance of
valve positioners with pneumatic outputs
IEC 62098 2000 Evaluation methods for microprocessor-- -
based instruments
3) 4)
CISPR 22 (mod) - Information technology equipment - Radio EN 55022 1998
disturbance characteristics - Limits and
methods of measurement
INTERNATIONAL IEC
STANDARD 61514-2
First edition
2004-01
Industrial process control systems –
Part 2:
Methods of evaluating the performance
of intelligent valve positioners
with pneumatic outputs
© IEC 2004 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale W
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
For price, see current catalogue
– 2 – 61514-2 © IEC:2004(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references.8
3 Terms and definitions .9
4 Design review.10
4.1 Positioner identification.10
4.1.1 Power supply unit.11
4.1.2 Sensor/input assembly.11
4.1.3 Auxiliary sensor assembly.11
4.1.4 Human interface.11
4.1.5 Communication interface.12
4.1.6 Data processing unit .12
4.1.7 Output subsystem.12
4.1.8 External functionality.13
4.2 Aspects of functionality and capabilities to be reviewed .13
4.2.1 Checklist.13
4.2.2 Reporting.19
4.3 Documentary information.19
5 Performance testing.20
5.1 Reference conditions for performance tests .20
5.1.1 Valve characteristics.21
5.2 General testing procedures.23
5.2.1 Test set-up.23
5.2.2 Testing precautions.24
5.3 Initial observations and measurements .24
5.3.1 Mounting procedure.24
5.3.2 Configuration procedures.25
5.3.3 Stem position calibration procedure .25
5.3.4 Stem position tuning procedure.25
5.4 Performance test procedures .26
5.4.1 Tests under reference conditions .26
5.4.2 Effects of influence quantities .28
6 Other considerations.34
6.1 Safety.34
6.2 Degree of protection provided by enclosures.34
6.3 Electromagnetic emission.34
6.4 Variants.34
7 Evaluation report.34
Annex A (normative) Vibration test set-up.36
Bibliography .37
61514-2 © IEC:2004(E) – 3 –
Figure 1 – Positioner model in extensive configuration.11
Figure 2 – Basic design for positioners with analogue outputs.13
Figure 3 – Basic design for positioners with pulsed output .13
Figure 4 – Basic test set-up.24
Figure 5 – Examples of step responses of positioners .28
Table 1 – Single or double acting linear .21
Table 2 – Single or double acting rotary for an angle between 60° – 90° .22
Table 3 – Matrix of instrument properties and tests.29
– 4 – 61514-2 © IEC:2004(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
INDUSTRIAL PROCESS CONTROL SYSTEMS –
Part 2: Methods of evaluating the performance of
intelligent valve positioners with pneumatic outputs
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Gui
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.