EN 60809:1996/A2:2002
(Amendment)Lamps for road vehicles - Dimensional, electrical and luminous requirements
Lamps for road vehicles - Dimensional, electrical and luminous requirements
EN following parallel vote
Lampen für Straßenfahrzeuge - Maße, elektrische und lichttechnische Anforderungen
Lampes pour véhicules routiers - Prescriptions dimensionnelles, électriques et lumineuses
Lamps for road vehicles - Dimensional, electrical and luminous requirements - Amendment A2 (IEC 60809:1995/A2:2002)
Zajema sijalke, ki se uporabljajo v žarometih, meglenkah in signalnih lučeh za cestna vozila, in določa tehnične zahteve z metodami preskušanja in osnovne zamenljivosti (dimenzijske, električne in svetlobne). Med drugim se uporablja tudi za sijalke, ki so lahko predmet zakonodaje. Zajema predvsem sijalke iz Uredbe št. 37 Ženevskega sporazuma z dne 20. marca 1958 Ekonomske komisije Združenih narodov za Evropo (ECE) v zvezi s prilagoditvijo enotnih pogojev za odobritev in vzajemno priznavanje odobritve opreme in delov motornih vozil.
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60809:1996/A2:2004
STANDARD
januar 2004
(istoveten EN 60809:1996/A2:2002)
Lamps for road vehicles - Dimensional, electrical and luminous requirements -
Amendment A2 (IEC 60809:1995/A2:2002)
ICS 29.140.20 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60809/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2002
ICS 29.140.20; 43.040.20
English version
Lamps for road vehicles -
Dimensional, electrical and luminous requirements
(IEC 60809:1995/A2:2002)
Lampes pour véhicules routiers - Lampen für Straßenfahrzeuge -
Prescriptions dimensionnelles, électriques Maße, elektrische und lichttechnische
et lumineuses Anforderungen
(CEI 60809:1995/A2:2002) (IEC 60809:1995/A2:2002)
This amendment A2 modifies the European Standard EN 60809:1996; it was approved by CENELEC on
2002-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60809:1996/A2:2002 E
Foreword
The text of document 34A/979/FDIS, future amendment 2 to IEC 60809:1995, prepared by SC 34A,
Lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as amendment A2 to EN 60809:1996 on 2002-06-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-03-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2005-06-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A, B, C, D, E, F, H and ZA are normative and annexes G and J are
informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of amendment 2:2002 to the International Standard IEC 60809:1995 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
- 3 - EN 60809:1996/A2:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
Replace the existing list of references by:
Publication Year Title EN/HD Year
1)
IEC 60050-845 - International Electrotechnical --
Vocabulary (IEV)
Chapter 845: Lighting
1)
IEC 60051 - Direct acting indicating analogue EN 60051 Series
electrical measuring instruments and
their accessories
1) 2)
IEC 60061-1 - Lamp caps and holders together with EN 60061-1 1993
(mod) gauges for the control of + amendments
interchangeability and safety
Part 1: Lamp caps
1) 2)
IEC 60810 - Lamps for road vehicles - Performance EN 60810 1994
requirements
1) 2)
IEC 60983 - Miniature lamps EN 60983 1996
1)
Undated reference.
2)
Valid edition at date of issue.
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
Modifiée selon les amendements:
Amended in accordance with amendments:
1(1996) et/and 2(2002)
Lampes pour véhicules routiers –
Prescriptions dimensionnelles,
électriques et lumineuses
Lamps for road vehicles –
Dimensional, electrical and luminous
requirements
” IEC 2002 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
Commission Electrotechnique Internationale
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
60809 Amend 2 ¤ IEC:2002 – 3 – l
CONTENTS
1 General.5
1.1 Scope .5
1.2 Normative references .7
1.3 Definitions .7
1.4 Numbering system for lamp data sheets .11
2 Requirements and test conditions for filament lamps.11
2.1 General requirements .11
2.2 Lamp marking .11
2.3 Bulbs.13
2.4 Colour of the bulb.13
2.5 Lamp dimensions .13
2.6 Caps and bases .15
2.7 Initial electrical and luminous requirements.15
2.8 Check on optical quality.15
2.9 UV radiation .17
2.10 Standard (étalon) filament lamps .17
3 Requirements and test conditions for discharge lamps .17
3.1 General requirements .17
3.2 Lamp marking .17
3.3 Bulbs.19
3.4 Caps .19
3.5 Position and dimensions of electrodes, arc and black stripes .19
3.6 Starting, run-up and hot-restrike characteristics .21
3.7 Electrical and photometric characteristics .21
3.8 Colour .21
3.9 UV radiation .23
3.10 Standard (étalon) discharge lamps .25
4 Sampling and conditions of compliance .25
5 Lamp data sheets.27
5.1 List of specific lamp types.27
Annex A (normative) Filament shape, length and position . A-2
Annex B (normative) Colour . B-2
Annex C (normative) Test conditions for electrical and luminous characteristics. C-2
Annex D (normative) Method of measuring internal elements of R2 lamps. D-2
Annex E (normative) Method of measuring internal elements of H4 and HS1
lamps………………… . E-2
Annex F (normative) Method of measuring internal elements of HB1 lamps . F-2
Annex G (informative) Optical set-up for the measurement of the position and form
of the arc and of the position of the electrodes of discharge lamps .G-2
Annex H (normative) Measurement method of electrical and photometric
characteristics of discharge lamps. H-2
Annex J (informative) Overview of lamp types and their applications .J-2
60809 Amend 2 ¤ IEC:2002 – 5 – l
LAMPS FOR ROAD VEHICLES –
DIMENSIONAL, ELECTRICAL AND LUMINOUS REQUIREMENTS
1 General
1.1 Scope
This International Standard is applicable to replaceable lamps (filament lamps and discharge
lamps) to be used in headlamps, fog-lamps and signalling lamps for road vehicles.
It is especially applicable to those lamps which are the subject of legislation. In particular, it
1)
includes the lamps contained in Regulations No.37and No.99 of the Geneva Agreement of
20 March 1958 of the United Nations Economic Commission for Europe (ECE). However, the
standard may be used for other lamps falling under the scope of this standard.
The standard specifies the technical requirements with methods of tests and basic
interchangeability (dimensional, electrical and luminous) for lamps of normal production and
for standard (étalon) lamps.
For most of the requirements given in this standard reference is made to the "relevant data
sheet". For all lamps listed in Clause 5 , data sheets are contained in this standard. For other
lamps the relevant data are supplied by the lamp manufacturer or responsible vendor. It
could be based on national legislation.
Other requirements such as lamp life, lumen maintenance, torsion strength and resistance to
vibration and shock are specified in IEC 60810. The latter standard also gives information for
guidance of lighting equipment design, such as temperature limits and maximum lamp
outlines.
Road vehicle lamps for supplementary purposes which are not the subject of legislation are
specified in IEC 60983.
In countries which legislate for approval, for example under the terms of the aforementioned
ECE Regulations, it is suggested that reference is made to this standard for assessment of
compliance. IEC 60810 and IEC 60983 are not intended for that purpose.
NOTE In the various vocabularies and standards, different terms are used for "incandescent lamp" (IEV 845-07-04) and
"discharge lamp" (IEV 845-07-17). In this standard "filament lamp" and "discharge lamp" are used. However, where
only "lamp" is written both types are meant, unless the context clearly shows that it applies to one type only.
———————
1)
United Nations Economic Commission for Europe (ECE), Regulation 37:1992, Uniform provisions concerning
the approval of filament lamps for use in approved lamp units of power-driven vehicles and of their trailers
United Nations Economic Commission for Europe (ECE), Regulation 99:1996, Uniform provisions concerning
the approval of gas-discharge light sources for use in approved gas-discharge lamp units of power-driven
vehicles
60809 Amend 2 ¤ IEC:2002 – 7 – l
1.2 Normative references
The following normative documents contain provisions which, through reference in this text,
constitute provisions of this International Standard. For dated references, subsequent
amendments to or revisions of, these publications do not apply. However, parties to
agreements based on this International Standard are encouraged to investigate the possibility
of applying the most recent edition of the normative document indicated below. For undated
references, the latest edition of the normative document referred to applies. Members of IEC
and ISO maintain registers of currently valid International Standards.
IEC 60050(845), International Electrotechnical Vocabulary (IEV) – Chapter 845: Lighting
IEC 60051, Direct acting indicating analogue electrical measuring instruments and their
accessories
IEC 60061-1, Lamp caps and holders together with gauges for the control of
interchangeability and safety – Part 1: Lamp caps
IEC 60810, Lamps for road vehicles - Performance requirements
IEC 60983, Miniature lamps
1.3 Definitions
1.3.1
category
this term is used to describe different basic designs of standardized lamps.
NOTE Each specific designation, for example P21/5W, H4, D2R forms a category. Most of these designations are
taken from the ECE Regulations.
1.3.2
type
lamps of different types are those within the same category which differ in such essential
respects as:
a) trade name or mark;
NOTE Lamps bearing the same trade name or mark but produced by different manufacturers are considered as
being of different types. Lamps produced by the same manufacturer differing only by the trade name or mark may
be considered to be of the same type.
b) bulb design, insofar as it affects the optical results;
c) for filament lamps, nominal voltage.
1.3.3
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.