Lamps for road vehicles - Dimensional, electrical and luminous requirements

IEC 60809:2014 is applicable to replaceable and standardised lamps (filament lamps, discharge lamps and LED light sources) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. In some applications, these lamps may be installed as non-replaceable. This third edition cancels and replaces the second edition (1995), its Amendment 1 (1996), its Amendment 2 (2002), its Amendment 3 (2004), its Amendment 4 (2009) and its Amendment 5 (2012). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the introduction of requirements for non-replaceable filament lamps; b) the introduction of requirements for LED light sources.

Lampen für Straßenfahrzeuge - Maße, elektrische und lichttechnische Anforderungen

Lampes pour véhicules routiers - Exigences dimensionnelles, électriques et lumineuses

L'IEC 60809:2014 est applicable aux lampes remplaçables et normalisées (lampes à filament, lampes à décharge et sources lumineuses à LED) destinées à être utilisées dans les projecteurs avant, feux de brouillard et feux de signalisation des véhicules routiers. Dans certaines applications, ces lampes peuvent être installées en tant que lampes non remplaçables. Cette troisième édition annule et remplace la deuxième édition (1995), l'Amendement 1 (1996), l'Amendement 2 (2002), l'Amendement 3 (2004), l'Amendement 4 (2009) et l'Amendement 5 (2012). Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) introduction des exigences applicables aux lampes à filament non remplaçables; b) introduction des exigences applicables aux sources lumineuses à LED.

Sijalke za cestna vozila - Dimenzijske, električne in svetlobne zahteve (IEC 60809:2014)

General Information

Publication Date
Withdrawal Date
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
Completion Date


Buy Standard

EN 60809:2015
English language
85 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

SIST EN 60809:2015
SIST EN 60809:1996
SIST EN 60809:1996/A1:2002
SIST EN 60809:1996/A2:2004
SIST EN 60809:1996/A3:2005
SIST EN 60809:1996/A4:2009
SIST EN 60809:1996/A5:2013

Lamps for road vehicles - Dimensional, electrical and luminous requirements
Lampen für Straßenfahrzeuge - Maße, elektrische und lichttechnische Anforderungen
Lampes pour véhicules routiers - Exigences dimensionnelles, électriques et lumineuses
Ta slovenski standard je istoveten z: EN 60809:2015
29.140.20 Žarnice z žarilno nitko Incandescent lamps
43.040.20 Naprave za osvetlitev, Lighting, signalling and
signalizacijo in opozarjanje warning devices
SIST EN 60809:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------



March 2015
ICS 43.040.20; 29.140.20 Supersedes EN 60809:1996
English Version
Lamps for road vehicles - Dimensional, electrical and luminous
(IEC 60809:2014)
Lampes pour véhicules routiers - Exigences Lampen für Straßenfahrzeuge - Maße, elektrische und
dimensionnelles, électriques et lumineuses lichttechnische Anforderungen
(IEC 60809:2014) (IEC 60809:2014)
This European Standard was approved by CENELEC on 2015-01-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60809:2015 E

---------------------- Page: 2 ----------------------

EN 60809:2015 - 2 -
The text of document 34A/1798/FDIS, future edition 3 of IEC 60809, prepared by SC 34A "Lamps", of
IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60809:2015.
The following dates are fixed:
(dop) 2015-10-20
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2018-01-20
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 60809:1996.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60809:2014 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 3 ----------------------

- 3 - EN 60809:2015
Annex ZA

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here:

Publication Year Title EN/HD Year
IEC 60050 series International electrotechnical vocabulary - -
IEC 60051-1 -  Direct acting indicating analogue electrical measuring EN 60051-1 -
instruments and their accesso

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.