EN 61124:2006

Reliability testing - Compliance tests for constant failure rate and constant failure intensity

This International Standard gives a number of optimized test plans, the corresponding operating characteristic curves and expected test times. In addition the algorithms for designing test plans using a spreadsheet program are also given, together with guidance on how to choose test plans. This standard does not cover guidance on how to plan, perform, analyse and report a test. This information can be found in IEC 60300-3-5. This standard does not describe test conditions. This information can be found in IEC 60605-2 and in IEC 60605, Parts 3-1 to 3-6.

Prüfungen der Funktionsfähigkeit - Prüfpläne für konstante Ausfallrate und konstante Ausfalldichte

Essais de fiabilité - Plans d'essais de conformité d'un taux de défaillance constant et d'une intensité de défaillance constante

La présente Norme internationale fournit un certain nombre de plans d'essais optimisés, les courbes d'efficacité associées et les valeurs moyennes des temps d'essais. De plus, les algorithmes pour la conception de plans d'essais à l'aide d'un tableur électronique sont également fournis avec des lignes directrices sur la manière de choisir les plans d'essais. La présente norme ne couvre pas les lignes directrices sur la manière de planifier, réaliser, analyser et faire un rapport sur un essai. Ces informations sont données dans la CEI 60300-3-5. La présente norme ne couvre pas les conditions d'essais. Ces informations sont données dans la CEI 60605-2 et la CEI 60605, Parties 3-1 à 3-6.

Preskušanje zanesljivosti – Ustreznostni preskusi za konstantno pogostost odpovedi in konstantno intenzivnost odpovedi (IEC 61124:2006)

General Information

• Status: Withdrawn
• Publication Date: 15-Jun-2006
• Withdrawal Date: 30-Apr-2009
• ICS: 03.120.30 - Application of statistical methods
• ICS: 19.020 - Test conditions and procedures in general
• ICS: 21.020 - Characteristics and design of machines, apparatus, equipment
• Technical Committee: CLC/SR 56 - Dependability
• Drafting Committee: IEC/TC 56 - IEC_TC_56
• Parallel Committee: IEC/TC 56 - IEC_TC_56
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Jun-2015
• Completion Date: 27-Jun-2015
• Ref Project: SIST EN 61124:2007 - Reliability testing - Compliance tests for constant failure rate and constant failure intensity

Relations

• Replaced By: EN 61124:2012 - Reliability testing - Compliance tests for constant failure rate and constant failure intensity
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61124:2007
01-januar-2007
Preskušanje zanesljivosti – Ustreznostni preskusi za konstantno pogostost
odpovedi in konstantno intenzivnost odpovedi (IEC 61124:2006)
Reliability testing - Compliance tests for constant failure rate and constant failure
intensity
Prüfungen der Funktionsfähigkeit - Prüfpläne für konstante Ausfallrate und konstante
Ausfalldichte
Essais de fiabilité - Plans d'essais de conformité d'un taux de défaillance constant et
d'une intensité de défaillance constante
Ta slovenski standard je istoveten z: EN 61124:2006
ICS:
19.020 Preskuševalni pogoji in Test conditions and
postopki na splošno procedures in general
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
SIST EN 61124:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61124:2007

---------------------- Page: 2 ----------------------

SIST EN 61124:2007


EUROPEAN STANDARD
EN 61124

NORME EUROPÉENNE
June 2006
EUROPÄISCHE NORM

ICS 03.120.30; 19.020; 21.020


English version


Reliability testing -
Compliance tests for constant failure rate
and constant failure intensity
(IEC 61124:2006)


Essais de fiabilité - Prüfungen der Funktionsfähigkeit -
Plans d'essais de conformité d'un taux de Prüfpläne für konstante Ausfallrate
défaillance constant et d'une intensité de und konstante Ausfalldichte
défaillance constante (IEC 61124:2006)
(CEI 61124:2006)




This European Standard was approved by CENELEC on 2006-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61124:2006 E

---------------------- Page: 3 ----------------------

SIST EN 61124:2007
EN 61124:2006 - 2 -

Foreword
The text of document 56/1081/FDIS, future edition 2 of IEC 61124, prepared by IEC TC 56,
Dependability, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61124 on 2006-05-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2007-02-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2009-05-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61124:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61124:2007
- 3 - EN 61124:2006

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1)
IEC 60050-191 - International Electrotechnical Vocabulary - -
(IEV)
Chapter 191: Dependability and quality of
service


IEC 60300-3-5 2001 Dependability management - -
Part 3-5: Application guide - Reliability test
conditions and statistical test principles


1)
IEC 60605-2 - Equipment reliability testing - -
Part 2: Design of test cycles


IEC 60605-3 Series Equipment reliab
...