iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50119:2009/A1:2013

(Amendment)

Railway applications - Fixed installations - Electric traction overhead contact lines

Railway applications - Fixed installations - Electric traction overhead contact lines

2013-02-05: Publication editing allocated to capalgi@cencenelec.eu

Bahnanwendungen - Ortsfeste Anlagen - Oberleitungen für den elektrischen Zugbetrieb

Applications ferroviaires - Installations fixes - Lignes aériennes de contact pour la traction électrique

Železniške naprave - Stabilne naprave električne vleke - Kontaktni vodniki električne vleke

Ta evropski standard se nanaša na sisteme kontaktnega vodnika za nadzemno električno vleko pri težkih železnicah, lahkih železnicah, cestnih železnicah ter industrijskih železnicah javnih in zasebnih operaterjev. Nanaša se na nove vgradnje nadzemnih sistemov kontaktnega vodnika in za celovito rekonstrukcijo obstoječih nadzemnih sistemov kontaktnega vodnika. Ta standard vključuje zahteve in teste za projektiranje nadzemnih sistemov kontaktnega vodnika, zahteve za strukture in njihove strukturne izračune ter preskuse in teste za projektiranje montaž in posameznih delov. Ta standard ne ponuja zahtev za sisteme vodnikov, kjer so ti nameščeni poleg tirnic.

General Information

Status
Withdrawn
Publication Date
25-Apr-2013
Withdrawal Date
10-Mar-2016
ICS
29.280 - Electric traction equipment
Technical Committee
CLC/TC 9X - Electrical and electronic applications for railways
Drafting Committee
CLC/SC 9XC - Electric supply and earthing systems for public transport equipment and ancillary apparatus (fixed i
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
13-Jan-2023
Completion Date
13-Jan-2023
Directive
2001/16/EC - Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
96/48/EC - Interoperability of the trans-European high-speed rail system
Ref Project
SIST EN 50119:2009/A1:2013 - Railway applications - Fixed installations - Electric traction overhead contact lines

Relations

Replaced By
EN 50119:2020 - Railway applications - Fixed installations - Electric traction overhead contact lines
Effective Date
07-Apr-2020
Amends
EN 50119:2009 - Railway applications - Fixed installations - Electric traction overhead contact lines
Effective Date
28-Jan-2023

Buy Standard

EN 50119:2009/A1:2013EN 50119:2009/A1:2013
PreviousNext
Amendment
EN 50119:2009/A1:2013
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50119:2009/A1:2013
01-julij-2013
äHOH]QLãNHQDSUDYH6WDELOQHQDSUDYHHOHNWULþQHYOHNH.RQWDNWQLYRGQLNL
HOHNWULþQHYOHNH
Railway applications - Fixed installations - Electric traction overhead contact lines
Bahnanwendungen - Ortsfeste Anlagen - Oberleitungen für den elektrischen Zugbetrieb
Applications ferroviaires - Installations fixes - Lignes aériennes de contact pour la traction
électrique
Ta slovenski standard je istoveten z: EN 50119:2009/A1:2013
ICS:
29.280 (OHNWULþQDYOHþQDRSUHPD Electric traction equipment
SIST EN 50119:2009/A1:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50119:2009/A1:2013

---------------------- Page: 2 ----------------------

SIST EN 50119:2009/A1:2013

EUROPEAN STANDARD
EN 50119/A1

NORME EUROPÉENNE
April 2013
EUROPÄISCHE NORM

ICS 29.280


English version


Railway applications -
Fixed installations -
Electric traction overhead contact lines



Applications ferroviaires -  Bahnanwendungen -
Installations fixes - Ortsfeste Anlagen -
Lignes aériennes de contact pour la Oberleitungen für den elektrischen
traction électrique Zugbetrieb






This amendment A1 modifies the European Standard EN 50119:2009; it was approved by CENELEC on
2013-03-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50119:2009/A1:2013 E

---------------------- Page: 3 ----------------------

SIST EN 50119:2009/A1:2013
EN 50119:2009/A1:2013 - 2 -
Contents
Foreword . 3
1 Modification to Clause 2 . 4
2 Modification to 5.1.2 . 4
3 Modification to 5.2.2 . 4
4 Modifications to 5.3.7 . 4
5 Modification to 5.4.6 . 4
6 Modifications to 6.2.4.7 . 4
7 Modification to 6.4.7 . 4
8 Modification to 7.2 . 5
9 Modification to 7.4 . 5
10 Modifications to 7.9 . 5
11 Modifications to 7.10 . 5
12 Modification to 8.2.1.5.2 .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50367:2020/A1:2022(Amendment)
Railway applications - Fixed installations and rolling stock - Criteria to achieve technical compatibility between pantographs and overhead contact line
SIST EN 50367:2020/A1:2022

This document specifies requirements for the technical compatibility between pantographs and overhead contact lines, to achieve free access to the lines of the European railway network. NOTE These requirements are defined for a limited number of pantograph types conforming to the requirements in 5.3, together with the geometry and characteristics of compatible overhead contact lines.

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50122-1:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
SIST EN 50122-1:2022

This document specifies requirements for the protective provisions relating to electrical safety in fixed installations associated with AC and/or DC traction systems and to any installations that can be endangered by the electric traction power supply system. This also includes requirements applicable to vehicles on electrified lines. It also applies to all aspects of fixed installations which are necessary to ensure electrical safety during maintenance work within electric traction power supply systems. This document applies to new electric traction power supply systems and major revisions to electric traction power supply systems for: a) railways; b) guided mass transport systems such as 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) trolleybus systems, 5) electric traction power supply systems for road vehicles, which use an overhead contact line system, and 6) magnetically levitated systems, which use a contact line system; c) material transportation systems. This document does not apply to: a) electric traction power supply systems in underground mines, b) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the electric traction power supply system, c) suspended cable cars, d) funicular railways, e) existing vehicles. This document does not specify working rules for maintenance. The requirements within this document related to protection against electric shock are applicable to persons only.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50122-3:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of AC and DC traction systems
SIST EN 50122-3:2022

This document specifies requirements for the protective provisions relating to electrical safety in fixed installations, when it is reasonably likely that hazardous voltages or currents will arise for people or equipment, as a result of the mutual interaction of AC and DC electric power supply traction systems. It also applies to all aspects of fixed installations that are necessary to ensure electrical safety during maintenance work within electric power supply traction systems. The mutual interaction can be of any of the following kinds: — parallel running of AC and DC electric traction power supply systems; — crossing of AC and DC electric traction power supply systems; — shared use of tracks, buildings or other structures; — system separation sections between AC and DC electric traction power supply systems. The scope is limited to galvanic, inductive and capacitive coupling of the fundamental frequency voltages and currents and their superposition. This document applies to all new lines, extensions and to all major revisions to existing lines for the following electric traction power supply systems: a) railways; b) guided mass transport systems such as: 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) magnetically levitated systems, which use a contact line system, 5) trolleybus systems, and 6) electric traction power supply systems for road vehicles, which use an overhead contact line system; c) material transportation systems. The document does not apply to: a) electric traction power supply systems in underground mines; b) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the electric traction power supply system for railways; c) suspended cable cars; d) funicular railways; e) procedures or rules for maintenance. The rules given in this document can also be applied to mutual interaction with non-electrified tracks, if hazardous voltages or currents can arise from AC or DC electric traction power supply systems.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50122-2:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by DC traction systems
SIST EN 50122-2:2022

This document specifies requirements for protective provisions against the effects of stray currents, which result from the operation of DC electric traction power supply systems. As several decades' experience has not shown evident corrosion effects from AC electric traction power supply systems, this document only deals with stray currents flowing from a DC electric traction power supply system. This document applies to all metallic fixed installations which form part of the traction system, and also to any other metallic components located in any position in the earth, which can carry stray currents resulting from the operation of the railway system. This document applies to all new DC lines and to all major revisions to existing DC lines. The principles can also be applied to existing electrified transportation systems where it is necessary to consider the effects of stray currents. This document does not specify working rules for maintenance but provides design requirements to allow maintenance. The range of application includes: a) railways, b) guided mass transport systems such as: 1) tramways, 2) elevated and underground railways, 3) mountain railways, 4) magnetically levitated systems, which use a contact line system, and 5) trolleybus systems, c) material transportation systems. This document does not apply to a) electric traction power supply systems in underground mines, b) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly from the contact line system and are not endangered by the electric traction power supply system, c) suspended cable cars, d) funicular railways.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50163:2004/A3:2022(Amendment)
Railway applications - Supply voltages of traction systems
SIST EN 50163:2005/A3:2023

This European Standard specifies the main characteristics of the supply voltages of traction systems, such as traction fixed installations, including auxiliary devices fed by the contact line, and rolling stock, for use in the following applications : – railways; – guided mass transport systems such as tramways, elevated and underground railways mountain railways, and trolleybus systems; – material transportation systems. This European Standard does not apply to – mine traction systems in underground mines, – cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly or via transformers from the contact line system and are not endangered by the traction power supply system, – suspended cable cars, – funicular railways. This European Standard deals with long term overvoltages as shown in the Annex A.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50388-1:2022(Main)
Railway Applications - Fixed installations and rolling stock - Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability - Part 1: General
SIST EN 50388-1:2022

This document establishes requirements for the electrical aspects to achieve technical compatibility between rolling stock and electric traction systems, limited to: - co-ordination of protection principles between power supply and traction units, i.e. separation sections, train set current or power limitation, short circuit current discrimination, breaker coordination and use of regenerative braking. - co-ordination of installed power on the line and the power demand of trains, i.e. traction unit power factor, train set current or power limitation, electric system performance, type and characterization. - compatibility assessment relating to harmonics and dynamic effects. Informative values are given for some parts of the existing European railway networks, in annexes. NOTE For those railways within the scope of EU Interoperability Directive, definitive values are set out in the register of infrastructure published in accordance with Article 49 of Directive (EU) 2016/797, and the list of items included in the register is described in the commission decision (EU) 2019/777. The following electric traction systems are within the scope of this document: - railways; - guided mass transport systems that are integrated with railways; - material transport systems that are integrated with railways. Information is given on electrification parameters to enable train operating companies to confirm, after consultation with the rolling stock manufacturers, that risks of non-compatibility are minimized and that there will be no consequential disturbance on the electrification system. The interaction between pantograph and overhead contact line is dealt with in EN 50367:2020. The interaction with the control-command and signalling subsystem is not dealt with in this document. Basic considerations have been included concerning the use of accumulator trains.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50317:2012/A1:2022(Amendment)
Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
SIST EN 50317:2012/A1:2022

This European Standard specifies the functional requirements for output and accuracy of measurements of the dynamic interaction between pantograph and overhead contact line.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50318:2018/A1:2022(Amendment)
Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line
SIST EN 50318:2019/A1:2022

Simulation techniques are used to assess the dynamic interaction between overhead contact lines and pantographs, as part of the prediction of current collection quality. This document specifies functional requirements for the validation of such simulation methods to ensure confidence in, and mutual acceptance of the results of the simulations. This document deals with: - input and output parameters of the simulation; - comparison with line test measurements, and the characteristics of those line tests; - validation of pantograph models; - comparison between different simulation methods; - limits of application of validated methods to assessments of pantographs and overhead contact lines. This document applies to the current collection from an overhead contact line by pantographs mounted on railway vehicles. It does not apply to trolley bus systems.

  • Amendment
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50238-3:2022(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters
SIST-TS CLC/TS 50238-3:2022

For the purpose of demonstrating compatibility between rolling stock and axle counter detectors, this document defines the interference limits and evaluation methods to verify rolling stock emissions. Wheel sensors and crossing loops are not covered by this document. This document gives recommended individual limits to be applied to establish compatibility between RST and all selected types of axle counter detectors, including any covered by national standards. The list of selected types of axle counters and their limits for compatibility are drawn on the basis of established performance criteria. It is expected that the trend for newly signalled interoperable lines will be fitted with types that meet the compatibility limits published in the TSI CCS Interfaces Document (ERA/ERTMS/033281). To ensure adequate operational availability, it is essential that the rolling stock complies with the defined limits; otherwise, the established availability of the valid output function of axle counter detectors may be compromised. NOTE The influences from metal parts or inductively coupled resonant circuits on the vehicle, eddy current brakes or magnetic brakes, are not covered by this document but are considered on the basis of national technical specifications. For wheel sensors and wheel detectors in other applications than axle counters but utilizing the same rail sensors and detectors, transient and continuous interference can be considered as equivalent to axle counter detectors or axle counter sensors.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50152-4:2021(Main)
Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 4: AC metal-enclosed traction switchgear
SIST-TS CLC/TS 50152-4:2021

This document specifies requirements for prefabricated metal-enclosed traction switchgear for alternating current with traction voltages and frequencies as specified in EN 50163:2004 and used in indoor and outdoor installations. Enclosures may include fixed and removable components and may be filled with fluid (liquid or gas) to provide insulation. NOTE 1 EN 50163 specifies the AC traction systems 15 kV 16,7 Hz and 25 kV 50 Hz. NOTE 2 This document applies to single-phase or two-phase systems. For metal-enclosed traction switchgear containing gas-filled compartments, the design pressure is limited to a maximum of 300 kPa (relative pressure). NOTE 3 EN 62271 203 can be used as a guide for design and testing in case the design pressure of gas-filled compartments exceeds 300 kPa (relative pressure). Components contained in metal-enclosed traction switchgear are to be designed and tested in accordance with their various relevant standards. This document supplements the standards for the individual components regarding their installation in traction switchgear assemblies. This document does not preclude that other equipment may be included in the same enclosure. In such a case, any possible influence of that equipment on the traction switchgear is to be taken into account. NOTE 4 Traction switchgear having an insulation enclosure is covered by EN 62271 201. For definition see there or IEV 441 12 06.

  • Technical specification
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day