kSIST FprEN 1794-2:2024
(Main)Road traffic noise reducing devices - Non-acoustic performance - Part 2: Methods of determination of the general safety and environmental characteristics
Road traffic noise reducing devices - Non-acoustic performance - Part 2: Methods of determination of the general safety and environmental characteristics
This document specifies methods and criteria for assessing the general safety and environmental performance of road traffic noise reducing devices under typical roadside conditions. Appropriate test methods are provided where these are necessary. The treatment of each topic is covered separately in Annexes A to E.
Lärmschutzvorrichtungen an Straßen - Nichtakustische Eigenschaften - Teil 2: Methoden zur Bestimmung der allgemeinen Sicherheits- und Umwelteigenschaften
Dieses Dokument legt Verfahren und Kriterien zur Bewertung von Lärmschutzvorrichtungen hinsichtlich der Sicherheit und des Umweltschutzes im Allgemeinen unter für den Straßenrand typischen Bedingungen fest. Sofern erforderlich, sind geeignete Prüfverfahren angegeben. Diese Aspekte werden in Anhang A bis Anhang E einzeln behandelt.
Dispositifs de réduction du bruit du trafic routier - Performances non acoustiques - Partie 2 : Méthodes de détermination des caractéristiques générales de sécurité et des caractéristiques environnementales
Le présent document spécifie les méthodes et les critères d’évaluation de la sécurité générale ainsi que des performances relatives à l’environnement des dispositifs de réduction du bruit du trafic routier dans des conditions classiques d’installation en bordure de route. Des méthodes d’essai appropriées sont données chaque fois que cela est nécessaire. Chaque sujet est traité séparément dans les Annexes A à E.
Protihrupne ovire za cestni promet - Neakustične lastnosti - 2. del: Metode ugotavljanja splošnih značilnosti glede varnosti in okolja
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 1794-2:2022
01-februar-2022
Protihrupne ovire za cestni promet - Neakustične lastnosti - 2. del: Metode
ugotavljanja splošnih značilnosti glede varnosti in varovanja okolja
Road traffic noise reducing devices - Non-acoustic performance - Part 2: Methods of
determination of the general safety and environmental characteristics
Lärmschutzvorrichtungen an Straßen - Nichtakustische Eigenschaften - Teil 2: Methoden
zur Bestimmung der allgemeinen Sicherheits- und Umwelteigenschaften
Dispositifs de réduction du bruit du trafic routier - Performances non acoustiques - Partie
2 : Méthodes de détermination des caractéristiques générales de sécurité et des
caractéristiques environnementales
Ta slovenski standard je istoveten z: prEN 1794-2
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
oSIST prEN 1794-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1794-2:2022
---------------------- Page: 2 ----------------------
oSIST prEN 1794-2:2022
DRAFT
EUROPEAN STANDARD
prEN 1794-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2021
ICS 93.080.30 Will supersede EN 1794-2:2020
English Version
Road traffic noise reducing devices - Non-acoustic
performance - Part 2: Methods of determination of the
general safety and environmental characteristics
Dispositifs de réduction du bruit du trafic routier - Lärmschutzvorrichtungen an Straßen - Nichtakustische
Performances non acoustiques - Partie 2 : Méthodes de Eigenschaften - Teil 2: Methoden zur Bestimmung der
détermination des caractéristiques générales de allgemeinen Sicherheits- und Umwelteigenschaften
sécurité et des caractéristiques environnementales
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 226.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1794-2:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1794-2:2022
prEN 1794-2:2021 (E)
Contents Page
European foreword. 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and symbols . 5
3.1 Terms and definitions . 5
3.2 Symbols .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.